| Title: | AMIGA NOTES |
| Notice: | Join us in the *NEW* conference - HYDRA::AMIGA_V2 |
| Moderator: | HYDRA::MOORE |
| Created: | Sat Apr 26 1986 |
| Last Modified: | Wed Feb 05 1992 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 5378 |
| Total number of notes: | 38326 |
I'm having a problem with my A2000's RGB-signal. The monitor i am using
is made by RAMTEK and it's an RGB-monitor and tektronics terminal hw&sw,
but I'm only using the RGB-monitor via external RGB-input. The problem is
that the monitor uses somehow too much electric from A2000 and the
performance is drops from 1.0 down to .3-.4 also the internal clock goes
2 times faster than normal clock.
In the RGB-cable that I have made uses the Analog- Red/Green&Blue and I
have connected the Composite-sync to the Analog-Green also I have connected
together all 5 grounds.
I do not have this kind of a problem in A500 or A1000 models with the
same cable... So I need all help to get this problem solved!!!!
Kari.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2582.1 | External Clock feed? | FRAMBO::BALZER | Fri May 19 1989 11:54 | 9 | |
Are you sure that you didn't connect anything to external clock
pin at the Amiga RGB port??? This is pin #2 if I remember correctly
of the top of my rather empty head.
Your problem sounds just like that.
regards,
<CB>
| |||||
| 2582.2 | EEMELI::LINDEN | Fri May 19 1989 13:29 | 8 | ||
>Are you sure that you didn't connect anything to external clock
>pin at the Amiga RGB port???
Yes, I'm absolutely sure, because I've used this cable in A500 and A1000
and I haven't got any problems using the same monitor.
Kari.
| |||||