| Title: | AMIGA NOTES |
| Notice: | Join us in the *NEW* conference - HYDRA::AMIGA_V2 |
| Moderator: | HYDRA::MOORE |
| Created: | Sat Apr 26 1986 |
| Last Modified: | Wed Feb 05 1992 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 5378 |
| Total number of notes: | 38326 |
Has anyone successfully installed VideoTitler on a harddrive and
made it run from workbench. I followed the installation procedure
and it runs from CLI, but i want it to start from WB.
I tried the following:
o copied VideoTitler.info from floppy to harddrive
o opened icon and used INFO to change the tool spec
o double click on icon and it starts, but fails to find the settings
file
Should i try a drawer to point to the VideoTitler directory and
then use VideoTitler.info?
mark (i'm still quite new at this)
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2467.1 | an example... | LEDS::ACCIARDI | Tue Apr 11 1989 16:03 | 21 | |
Bear in mind that under the new 1.3 IconX command, you can invoke
anything from a Workbench icon by creating the appropriate script
file. For example, I wanted to run Matrix Laboratory from a Workbench
icon. I created a script file called MatStart which had the following
lines...
Assign FOR: DH1:Science
NewShell NewCON:0/0/640/400/Matrix_Laboratory s:MatLabStart
EndShell >nil:
This script file opens a 640 x 400 console window and then executes a
second script file called MatLabStart, which is simply the name of the
program. The script bit must be set on MatLabStart.
I then copied over a project Icon and made IconX the default tool. I
can now load and run a non-WB program from a WB icon.
Ed.
| |||||