[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference hydra::amiga_v1

Title:	AMIGA NOTES
Notice:	Join us in the NEW conference - HYDRA::AMIGA_V2
Moderator:	HYDRA::MOORE

Created:	Sat Apr 26 1986
Last Modified:	Wed Feb 05 1992
Last Successful Update:	Fri Jun 06 1997
Number of topics:	5378
Total number of notes:	38326

790.0. "TROUBLE WITH EPSON RX-80" by CAM::ARENDT () Mon Oct 12 1987 00:25

        I have an AMIGA 2000 and I have attached a EPSON RX-80 to the
    parallel port.  The problem is that there is no specific preference
    setting for the printer, there is EPSON, and EPSON JX-80 but no
    RX-80.  If I init the printer with either one of these I cannot
    get a good print no matter what I do (and the printout is total
    gaarbage).
        On the other hand if I init the system with the printer preference
    set up as generic I get good print but all spaces are ignored. 
    I don't know what to do and am open to any suggestions.  The printer
    works fine in test mode also.
    
                  DDT

T.R	Title	User	Personal Name	Date	Lines
790.1	see 771	SAUTER::SAUTER	John Sauter	`Mon Oct 12 1987 07:26`	4
	See topic 771 for a pointer to a shareware printer driver generator. I have used it successfully with my NEC P6, whereas the Epson drivers did not work correctly. John Sauter
790.2		DICKNS::MACDONALD	WA1OMM Listening 224.28	`Mon Oct 12 1987 08:50`	6
	EPSON is the correct preferences selection. Make sure the baud rate is set correct, and make sure the dip switches are correct. You might also want to make sure all your pins are set correctly. You also need to set the preferences to DRAFT, not LETTER, and make sure COLOR is not selected.
790.3	NEED PRINTER DRIVER	CAM::ARENDT		`Tue Oct 13 1987 09:58`	9
	To John Sauter; Can you make available the printer driver that you created ? I have no desire to go through what you have gone through I simply want the results. Thank You For Your Support DDT
790.4	sure	SAUTER::SAUTER	John Sauter	`Tue Oct 13 1987 15:22`	10
	If you will send me a 3 1/2 inch floppy I will fill it with the driver code. This is shareware, so if you find it useful you should send a check for $10 to the author. Details (including the author's address) are on the floppy. I am posting this here rather than sending a MAIL message because I am willing to copy the floppy for anybody. Send the floppy to ZKO2-3/R56. Don't forget your return address. John Sauter
790.5	Any cable source pointers or pinout info?	SMURF::COOLIDGE	Bayard, ULTRIX CSSE 381-0503 ZKO3	`Fri Jan 11 1991 13:24`	13
	I have, I think an "RX80P" in my basement. (I should have remembered to jot down the full nomenclature before heading into work). I don't have a cable for it. Can anyone recommend a source in Central or Southern NH that might have one OR does anyone have a pin-out diagram for the printer so that I could make a cable myself to plug into the A500? I'm assuming (rashly, perhaps?) that I'd use one of the drivers on the Extras disk. (I'm running 1.3). Thanks in advance as I'm still an Amiga novice. Bayard Coolidge
790.6		HKFINN::MACDONALD	VAXELN - Realtime Software Pubs	`Fri Jan 11 1991 15:56`	3
	The RX80 has a standard Centronics parallel port. You can pick up a standard Amiga printer cable for it from any Amiga dealer.