[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

1304.0. "LAT Devices Only Short Time" by ZUR01::SCHILLING () Tue May 21 1996 05:52

Hi all,
A customer installed V1.6 with ECO2 on a DEC 3000 -M300LX (VMS V6.2).

But the LAT Devices disappear alway after a short time.
The processes terminate with 0001C0F4 (%RMS-F-RER, file read error).

Whre have I to look further? Any hint is very appreciated

Paul
T.RTitleUserPersonal
Name		DateLines
1304.1V1.5 worksZUR01::SCHILLINGThu May 23 1996 12:264
The customer went back to V1.5 and this works well.
But the question remains: Why does this not work with V1.6?

Paul
1304.2CSC32::BUTTERWORTHGun Control is a steady hand.Thu May 23 1996 13:5716
    Paul.
    
     We have *lost* of people running 6.2 using LAT so this is more than
    likely an environmental problem. We don't use RMS to read from the
    terminal ports so this error is the result of reading some file. My
    first inclination is to question the integrity of the installation. I
    would reinstal V1.6 and insure that the installation was successful.
    If the problem still persists then do
    
    $ DEFINE/SYSTEM CONSOLE$DEBUG TERMINAL
    $ DEFINE/SYSTEM CONSOLE$DEBUG_LEVEL FFFFFFFF
    
    and post all of the daemon output logs.
    
    Regs,
      Dan
1304.3Here is the LogZUR01::SCHILLINGTue May 28 1996 02:081008
$	SAVED_VERIFY = F$VERIFY (0)	!sylogin.com
$	EXIT 1 + 0 * 0
$ !
$ ! Start a Child Controller process, name_num 1, child_num 1
$ !
$ CHILD :== $CONSOLE$IMAGE:CONSOLE$DAEMON.EXE
$ CHILD "child" 1
POLYCENTER Console Manager
Console Controller Daemon Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

 SYS$ASSIGN - Assigning Channel to LAT Device.
Attempting to Map  Lat Terminal Start
Cancelling QIOw timer  (status = 1, iosb[0] = 1)
Attempting to Map  Lat Terminal End
Attempting connect to Lat Terminal
QIOw timer Timeout procedure called, cancelling I/O
Cancelling QIOw timer  (status = 1, iosb[0] = 44)
Connected to Lat Terminal, Status = 1
iosb status was not normal value was <44>
 CMTerminalGetErrorMessages - Code is       : -190
 CMTerminalGetErrorMessages - Errno_Val is  : 44
 CMTerminalGetErrorMessages - Transport  is : 1
Deleting LAT port 
 SYS$DASSGN - Deassigning Channel from LAT terminal->chan in Close.
 SYS$ASSIGN - Assigning Channel to LAT Device.
Attempting to Map  Lat Terminal Start
Cancelling QIOw timer  (status = 1, iosb[0] = 1)
Attempting to Map  Lat Terminal End
Attempting connect to Lat Terminal
QIOw timer Timeout procedure called, cancelling I/O
Cancelling QIOw timer  (status = 1, iosb[0] = 44)
Connected to Lat Terminal, Status = 1
iosb status was not normal value was <44>
 CMTerminalGetErrorMessages - Code is       : -190
 CMTerminalGetErrorMessages - Errno_Val is  : 44
 CMTerminalGetErrorMessages - Transport  is : 1
Deleting LAT port 
 SYS$DASSGN - Deassigning Channel from LAT terminal->chan in Close.
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 1
CMStartPseudoCmd: for _RBAD1H$FTA54:
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<[>c>
pseudo_terminal_echo_ast: data from _RBAD1H$FTA54:
pseudo_terminal_echo_ast: queueing work procedure 0 bytes read
<>
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 1
CMStartPseudoCmd: for _RBAD1H$FTA55:
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<[>c>
pseudo_terminal_echo_ast: data from _RBAD1H$FTA55:
pseudo_terminal_echo_ast: queueing work procedure 0 bytes read
<>
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 1
CMStartPseudoCmd: for _RBAD1H$FTA56:
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<[>c>
pseudo_terminal_echo_ast: data from _RBAD1H$FTA56:
pseudo_terminal_echo_ast: queueing work procedure 0 bytes read
<>
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 1
CMStartPseudoCmd: for _RBAD1H$FTA57:
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<[>c>
pseudo_terminal_echo_ast: data from _RBAD1H$FTA57:
pseudo_terminal_echo_ast: queueing work procedure 0 bytes read
<>
 SYS$ASSIGN - Assigning Channel to LAT Device.
Attempting to Map  Lat Terminal Start
Cancelling QIOw timer  (status = 1, iosb[0] = 1)
Attempting to Map  Lat Terminal End
Attempting connect to Lat Terminal
QIOw timer Timeout procedure called, cancelling I/O
Cancelling QIOw timer  (status = 1, iosb[0] = 44)
Connected to Lat Terminal, Status = 1
iosb status was not normal value was <44>
 CMTerminalGetErrorMessages - Code is       : -190
 CMTerminalGetErrorMessages - Errno_Val is  : 44
 CMTerminalGetErrorMessages - Transport  is : 1
Deleting LAT port 
 SYS$DASSGN - Deassigning Channel from LAT terminal->chan in Close.
 SYS$ASSIGN - Assigning Channel to LAT Device.
Attempting to Map  Lat Terminal Start
Cancelling QIOw timer  (status = 1, iosb[0] = 1)
Attempting to Map  Lat Terminal End
Attempting connect to Lat Terminal
QIOw timer Timeout procedure called, cancelling I/O
Cancelling QIOw timer  (status = 1, iosb[0] = 44)
Connected to Lat Terminal, Status = 1
iosb status was not normal value was <44>
 CMTerminalGetErrorMessages - Code is       : -190
 CMTerminalGetErrorMessages - Errno_Val is  : 44
 CMTerminalGetErrorMessages - Transport  is : 1
Deleting LAT port 
 SYS$DASSGN - Deassigning Channel from LAT terminal->chan in Close.
 SYS$ASSIGN - Assigning Channel to LAT Device.
Attempting to Map  Lat Terminal Start
Cancelling QIOw timer  (status = 1, iosb[0] = 1)
Attempting to Map  Lat Terminal End
Attempting connect to Lat Terminal
QIOw timer Timeout procedure called, cancelling I/O
Cancelling QIOw timer  (status = 1, iosb[0] = 44)
Connected to Lat Terminal, Status = 1
iosb status was not normal value was <44>
 CMTerminalGetErrorMessages - Code is       : -190
 CMTerminalGetErrorMessages - Errno_Val is  : 44
 CMTerminalGetErrorMessages - Transport  is : 1
Deleting LAT port 
 SYS$DASSGN - Deassigning Channel from LAT terminal->chan in Close.
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA54:
<
[
>
c
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 5 bytes read
<
 
>
Rearm not set, NOT Requeing read AST!!!
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA55:
<
[
>
c
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 5 bytes read
<
 
>
Rearm not set, NOT Requeing read AST!!!
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA56:
<
[
>
c
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 5 bytes read
<
 
>
Rearm not set, NOT Requeing read AST!!!
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA57:
<
[
>
c
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 5 bytes read
<
 
>
Rearm not set, NOT Requeing read AST!!!
Calling read callback with 000005 bytes of data for terminal _RBAD1H$FTA54:
<


 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 60 bytes read
<
 Warning  Cannot determine terminal type
>
Calling read callback with 000005 bytes of data for terminal _RBAD1H$FTA55:
<


 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 60 bytes read
<
 Warning  Cannot determine terminal type
>
Calling read callback with 000005 bytes of data for terminal _RBAD1H$FTA56:
<


 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 60 bytes read
<
 Warning  Cannot determine terminal type
>
Calling read callback with 000005 bytes of data for terminal _RBAD1H$FTA57:
<


 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 60 bytes read
<
 Warning  Cannot determine terminal type
>
Calling read callback with 000060 bytes of data for terminal _RBAD1H$FTA54:
<





[
1
;
7
m
 
W
a
r
n
i
n
g
 

[
0
m
 
C
a
n
n
o
t
 
d
e
t
e
r
m
i
n
e
 
t
e
r
m
i
n
a
l
 
t
y
p
e

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 50 bytes read
<
          %SYSTEM-F-TIMEOUT, device timeout
>
Calling read callback with 000060 bytes of data for terminal _RBAD1H$FTA55:
<





[
1
;
7
m
 
W
a
r
n
i
n
g
 

[
0
m
 
C
a
n
n
o
t
 
d
e
t
e
r
m
i
n
e
 
t
e
r
m
i
n
a
l
 
t
y
p
e

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 50 bytes read
<
          %SYSTEM-F-TIMEOUT, device timeout
>
Calling read callback with 000060 bytes of data for terminal _RBAD1H$FTA56:
<





[
1
;
7
m
 
W
a
r
n
i
n
g
 

[
0
m
 
C
a
n
n
o
t
 
d
e
t
e
r
m
i
n
e
 
t
e
r
m
i
n
a
l
 
t
y
p
e

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 50 bytes read
<
          %SYSTEM-F-TIMEOUT, device timeout
>
Calling read callback with 000060 bytes of data for terminal _RBAD1H$FTA57:
<





[
1
;
7
m
 
W
a
r
n
i
n
g
 

[
0
m
 
C
a
n
n
o
t
 
d
e
t
e
r
m
i
n
e
 
t
e
r
m
i
n
a
l
 
t
y
p
e

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 50 bytes read
<
          %SYSTEM-F-TIMEOUT, device timeout
>
Calling read callback with 000050 bytes of data for terminal _RBAD1H$FTA54:
<

 
 
 
 
 
 
 
 
 
 
%
S
Y
S
T
E
M
-
F
-
T
I
M
E
O
U
T
,
 
d
e
v
i
c
e
 
t
i
m
e
o
u
t

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<
 
>
Calling read callback with 000050 bytes of data for terminal _RBAD1H$FTA55:
<

 
 
 
 
 
 
 
 
 
 
%
S
Y
S
T
E
M
-
F
-
T
I
M
E
O
U
T
,
 
d
e
v
i
c
e
 
t
i
m
e
o
u
t

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<
 
>
Calling read callback with 000050 bytes of data for terminal _RBAD1H$FTA56:
<

 
 
 
 
 
 
 
 
 
 
%
S
Y
S
T
E
M
-
F
-
T
I
M
E
O
U
T
,
 
d
e
v
i
c
e
 
t
i
m
e
o
u
t

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<
 
>
Calling read callback with 000050 bytes of data for terminal _RBAD1H$FTA57:
<

 
 
 
 
 
 
 
 
 
 
%
S
Y
S
T
E
M
-
F
-
T
I
M
E
O
U
T
,
 
d
e
v
i
c
e
 
t
i
m
e
o
u
t

[
0
m

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 4 bytes read
<
 
>
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA54:
<

 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA55:
<

 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA56:
<

 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 9 bytes read
<
>
Calling read callback with 000004 bytes of data for terminal _RBAD1H$FTA57:
<

 

>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
Calling read callback with 000009 bytes of data for terminal _RBAD1H$FTA56:
<


$
 
 
E
r
r
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 9 bytes read
<
>
Calling read callback with 000009 bytes of data for terminal _RBAD1H$FTA54:
<


$
 
E
O
U
T
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 9 bytes read
<
>
Calling read callback with 000009 bytes of data for terminal _RBAD1H$FTA55:
<


$
 
 
E
r
r
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 1
pseudo_terminal_read_ast: queueing work procedure 9 bytes read
<
>
Calling read callback with 000009 bytes of data for terminal _RBAD1H$FTA57:
<


$
 
[
>
0
c
>
Rearm set, Requeing read AST!!!
We have a read callback
We DO NOT have a read posted
The terminal is NOT closed
Setting Read AST on terminal
 SYS$DASSGN - Deassigning Channel from terminal->mbx_chan in Close.
pseudo_terminal_close_ast: from _RBAD1H$FTA54:
pseudo_terminal_read_ast: data from _RBAD1H$FTA54:
                           status = 44
 SYS$DASSGN - Deassigning Channel from terminal->mbx_chan in Close.
pseudo_terminal_close_ast: from _RBAD1H$FTA55:
pseudo_terminal_read_ast: data from _RBAD1H$FTA55:
                           status = 44
 SYS$DASSGN - Deassigning Channel from terminal->mbx_chan in Close.
pseudo_terminal_close_ast: from _RBAD1H$FTA56:
pseudo_terminal_read_ast: data from _RBAD1H$FTA56:
                           status = 44
 SYS$DASSGN - Deassigning Channel from terminal->mbx_chan in Close.
pseudo_terminal_close_ast: from _RBAD1H$FTA57:
pseudo_terminal_read_ast: data from _RBAD1H$FTA57:
                           status = 44
$ EXIT $STATUS
  SYSTEM       job terminated at 26-MAY-1996 20:58:57.44

  Accounting information:
  Buffered I/O count:             175         Peak working set size:   4144
  Direct I/O count:               140         Peak page file size:    18656
  Page faults:                    475         Mounted volumes:            0
  Charged CPU time:           0 00:00:03.07   Elapsed time:     0 00:02:06.13


CONSOLE$DAEMON.LOG:
-------------------

$	SAVED_VERIFY = F$VERIFY (0)	!sylogin.com
$	EXIT 1 + 0 * 0
$ !
$ ! Start Parent Controller process, this has child index of "0"$ !
$ DAEMON :== $CONSOLE$IMAGE:CONSOLE$DAEMON.EXE
$ DAEMON 
POLYCENTER Console Manager
Console Controller Daemon Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

CONSOLE$DAEMON: Termination Mailbox created (status = 1), channel = 240
CONSOLE$DAEMON: Termination Mailbox unit = 2026
Console Manager shutting down at user request
Termination mailbox message from unrecognised process (pid = 14536), ignoring.
$ EXIT $STATUS
  SYSTEM       job terminated at 26-MAY-1996 20:56:25.79

  Accounting information:
  Buffered I/O count:             131         Peak working set size:   3936
  Direct I/O count:               144         Peak page file size:    18000
  Page faults:                    420         Mounted volumes:            0
  Charged CPU time:           0 00:00:00.89   Elapsed time:     0 00:05:47.67


CONSOLE$ENS_DAEMON.LOG:
-----------------------

$	SAVED_VERIFY = F$VERIFY (0)	!sylogin.com
$	EXIT 1 + 0 * 0
$ !
$ ! Start Parent Controller process, this has child index of "0"$ !
$ DAEMON :== $CONSOLE$IMAGE:CONSOLE$ENS_DAEMON.EXE
$ DAEMON 
POLYCENTER Console Manager
Event Notification Services Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

CONSOLE$ENS_DAEMON: eventport_error Callback
    errno_val : 0
         msg1 : Read error on Local socket ENS
         msg2 : error 0
$ EXIT $STATUS
  SYSTEM       job terminated at 26-MAY-1996 20:56:24.66

  Accounting information:
  Buffered I/O count:              62         Peak working set size:   2912
  Direct I/O count:                13         Peak page file size:    15520
  Page faults:                    237         Mounted volumes:            0
  Charged CPU time:           0 00:00:00.39   Elapsed time:     0 00:05:44.33
1304.4CSC32::BUTTERWORTHGun Control is a steady hand.Tue May 28 1996 16:099
    Hmmmm.... it seems that you LAT connections are not being established
    in a timely manner. I have seen this at sites that have a PCM engine
    with multiple ethernet controllers. WHat we want to do is increase the
    console open timeout. Using the caharcter-cel config editor, enter the
    SET HIDDEN command. When prompted for the "Console open timeout"
    value, enter 30. This will allow a 30 second timeout.
    
    Regs,
      Dan
1304.5Yes, The System has Two Ethernet DevicesZUR01::SCHILLINGWed May 29 1996 08:2010
Hi Dan,

You're right, the customer has two Ethernet device: one for PCM and one
for the rest of Net Traffic.

The customer isn't there this week; i will post the result next week.

Thanks

Paul