[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

1189.0. "No 'Cmgr Connect' & 'Cmgr Disconnect' events generated" by 42441::JUDD (Geoff Judd. UK TSC. Viables, Basingstoke) Wed Feb 07 1996 12:15

Hi,
  Has anyone seen the following problem before ? 

I have a customer who is running 3 independent PCM systems. Each is running
OpenVMS VAX V6.1 and PCM V1.6-127. The number of consoles on each system is
between 17 & 32 so there are 2 child controller processes. He has found that
when connecting to systems that are connected via one of the controllers no
'Cmgr Connect' & 'Cmgr Disconnect' events are generated. Other events on these
systems are generated normally. 

The customer only noticed the problem after upgrading to V1.6-127 but it may
have also occurred on previous versions. I have tried to reproduce the problem
on a workstation running OpenVMS VAX V6.2 but I have been unable to do so.

Thanks in advance,

Geoff Judd.
T.RTitleUserPersonal
Name		DateLines
1189.1CSC32::BUTTERWORTHGun Control is a steady hand.Wed Feb 07 1996 16:007
    Geoff,
      Can you set CONSOLE$DEBUG to ENS at the customer site and retry the
    experiment? This will tell us if the ENS daemon is even getting the
    event.
    
    Regs,
      Dan
1189.2Nothing in console$tmp log file42708::WATSONRRoss WatsonFri Feb 09 1996 07:1118
Dan,Geoff,

    I have set the logical to ENS, shutdown and restarted PCM and obtained a
list of systems vs. controllers via "console status/all".

    Using the DCL "console connect x" command, I have connected to two systems
on each controller. Those controlled by "Console Ctrl 01" did not generate C3
events "CMgr Connect" or "CMgr Disconnect".

    I have checked the CONSOLE$TMP:CONSOLE$ENS_DAEMON.LOG log file (?), but
can only find events for the connects that were indicated by the C3 status 
line. Those from controller 1 did not appear in the log.

Ross

On-Site Support
British Telecom