[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

1034.0. "Access violation for PCMV1.6-100" by 22530::EDMONDLEUNG () Thu Oct 12 1995 07:07

    Hi,
    
    One of our potential customers has tried to install the PCMV1.6 onto
    the Alpha 1000 running OVMS V61.1-H2 with some other Polycenter
    software. This customer is using a X-terminal to run the PCM instead 
    on the console monitor. There is no problem during the installation and
    the IVP has been successfully complete. However, when the customer try
    to run the C3 command, they have encountered the followings:
    
    $
    $ cons C3
    POLYCENTER Console Manager
    C# Version V1.6-100
    Copyright (c) 1995 Digital Equipment Corportion. All Rights Reserved
    
    $SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual
    address=70757002, PC=000527AC, PS=0000001B
    
       Improperly handled condition, image exit forced.
         Signal arguments:  Number = 00000005
                            Name   = 0000000C
    				     00000000
                                     70757002
                                     000527AC
                                     0000001B
    
       Register Dump:
       ( not shown here)
       ....................
       ....................
    
    Can anyone provide suggestions what cause this problem? Will it cause
    by the X-terminal or others? The problem seems like the one mentioned
    on note 973. One more thing, there is no different whether install the
    ECO1 or not. Same result has been obtained.
    
    Thanks for any help in advance.
    Regards.
T.RTitleUserPersonal
Name		DateLines
1034.1Any suggestions on this problem?22530::EDMONDLEUNGMon Oct 16 1995 07:3310
    Hi,
    
    Has anyone encountered the same problem like this before? I am sure
    there is nothing wrong about the kit because I've tried to install it
    on one of our Alpha system in our office and it worked. I think there
    are some environments setup on the X-Terminal so that the customer can
    run the C3 on this X-Terminal. However, I don't know why the IVP can
    run successfully. Pls any suggestions are truly apprieciated.
    
    Thanks.