[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

942.0. "CM is already archiving a system" by 50242::MUELLER () Mon Aug 28 1995 05:31

    Hallo,
    
    I'm running CM V1.6 + ECO and I archive the logfiles each day with
    a scheduler job using the following command:
    
         console archive/before=today/noconfirm all
    
    Now and than, no archive is performed and I get the message
    
         POLYCENTER Console Manager is already archiving a system.
         Archive not performed.
    
    But looking in the previous logfile, the archive had been running fine.
    
    Now, I tried to shutdown and restart CM, but I still get the "already 
    archiving" message. 
    
    Is this still something "known" under CM V1.6-110? Do I have to reboot
    the system or is there any other possible way to get rid of this
    problem?
    
    Thanks for help,
    
    - Sabine 
            
T.RTitleUserPersonal
Name
DateLines
942.1CSC32::BUTTERWORTHGun Control is a steady hand.Mon Aug 28 1995 12:156
    We have seen this before. REbooting will clear it up but if you get
    everyone out of all PCM interface and then shutdown and restart the
    software, it should clear it up as well.
    
    Regs,
      Dan
942.242441::SHELLEYThats all I have to say about thatThu Jan 11 1996 09:5111
    �We have seen this before.
    
    Has this problem now been addressed by an ECO ?
    
    I currently have a customer seeing this exact problem where
    they get 'console manager already archiving system' even though it is
    not and even shutting down and restarting PCM does not clear it.
    
    Thanks for any update on this.
    
    Royston (UK CSC)
942.329067::BUTTERWORTHGun Control is a steady hand.Fri Jan 12 1996 13:595
    >Was this problem addressed by an eco
    
    Not yet.
    
    Use the workaround smentioned in -2.