[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

846.0. "V1.6 upgrade problems" by POLAR::HUTCH (Mike Hutchings, OMS Eastern Canada, Kanata) Fri Jun 30 1995 17:46

 I've just upgraded a PCM 1.5 system to PCM 1.6. None of the 11 lat ports
 are now reachable and I could use some help understanding why. The system
 has been rebooted so it's not because the ports were previously allocated.
 The ports were functional just before the upgrade.

 This is the initial log information....

$ ! Start Parent Controller process, this has child index of "0"$ !
$ DAEMON :== $CONSOLE$IMAGE:CONSOLE$DAEMON.EXE
$ DAEMON
POLYCENTER Console Manager
Console Controller Daemon Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

CONSOLE$DAEMON: Termination Mailbox created (status = 1), channel = 224
CONSOLE$DAEMON: Termination Mailbox unit = 30


 I enabled CONSOLE$DEBUG and the startup revealed this....

 Starting Console Manager Processes.

CMShm: Failed to map to section
       %SYSTEM-W-NOSUCHSEC, no such (global) section


There were lots of gblsections available on the system but just for fun
I gave it some more. 

I tried to stop PCM but that hung...

CTHVCS$ cons shut
CMShm: Returning HEADER record
CMShm: Mapped to section, reference count = 1
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
Do You Really want to Shutdown Console Manager? (N) :y
Console Manager shutting down, Please Wait...


I've attached copies of the logfiles in CONSOLE$TMP at the end of this note.
The CONSOLE$ENS_DAEMON.LOG contained lots of non printable characters and it
would hang my session!

After adding some gblsections (now more than 300 free) and a reboot I've
come across another problem that was not there before. My CONSOLE$TMP area
is filling up with action routine log and com files. This is the contents
of one of them ...

$ Define CONSOLE$ACTIONNAME "Kanata Command Center"
%RMS-W-RTB, 348 byte record too large for user's buffer

I'm able to shutdown PCM now without hanging

 Mike


Comment:
 When I upgraded to PCM 1.5 some months ago I spent an extraordinary amount of
 time working thru the problems. I upgraded to PCM 1.6 because I thought some
 of these problems were corrected. It would appear that I'm headed down the
 same path with this upgrade. From what I've seen so far I'm not at all
 impressed with the stability of this release or this product.




=======================CONSOLE$DAEMON.LOG===========================

$ !
$ ! This is the CTHVCS Cluster System Wide Login File
$ !
$ SAVE_VERIFY = F$ENVIRONMENT("VERIFY_PROCEDURE")
$ SET VERIFY  = NOPROCEDURE
$ EXIT
$ !
$ ! Start Parent Controller process, this has child index of "0"$ !
$ DAEMON :== $CONSOLE$IMAGE:CONSOLE$DAEMON.EXE
$ DAEMON 
POLYCENTER Console Manager
Console Controller Daemon Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

CMShm: Initialize done
CMShm: Returning HEADER record
CMShm: Reset system count
CMShm: Returning HEADER record
CMShm: Set CM PID
CMShm: Returning CM record
CMShm: Set CM version
CMShm: Returning CM record
CMShm: Set CM start time
CMShm: Returning CM record
Loading shared memory for system : CTHFS1
CMShm: Searching for system : CTHFS1
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : DPSDEV
CMShm: Searching for system : DPSDEV
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : DPSDEVHSC
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : FSHSCA
CMShm: Searching for system : FSHSCA
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : HSJ000
CMShm: Searching for system : HSJ000
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : HSJ001
CMShm: Searching for system : HSJ001
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : TIC15
CMShm: Searching for system : TIC15
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : TIC16
CMShm: Searching for system : TIC16
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : TRFSV1
CMShm: Searching for system : TRFSV1
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : TRFSV4
CMShm: Searching for system : TRFSV4
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
Loading shared memory for system : TRFSV5
CMShm: Searching for system : TRFSV5
CMShm: Set system transport
CMShm: Set system status
CMShm: Reset system lines
CMShm: Reset system bytes
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Reset system event priority count
CMShm: Increment system count
CMShm: Returning HEADER record
CONSOLE$DAEMON: Termination Mailbox created (status = 1), channel = 224
CONSOLE$DAEMON: Termination Mailbox unit = 3279
Termination mailbox message from unrecognised process (pid = 2228), ignoring.
CMCreateEventPort: Opening local transport event port <ENS>
CMCreateEventPort: Open succeeded
CMShm: Reset Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for FIRST system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Set system Child Number
CMShm: Searching for NEXT system record
CMShm: Returning NULL record, system not found
CMShm: Searching for system : CTHFS1
CMShm: Get system Child Number
CMShm: Searching for system : DPSDEV
CMShm: Get system Child Number
CMShm: Searching for system : DPSDEVHSC
CMShm: Get system Child Number
CMShm: Searching for system : FSHSCA
CMShm: Get system Child Number
CMShm: Searching for system : HSJ000
CMShm: Get system Child Number
CMShm: Searching for system : HSJ001
CMShm: Get system Child Number
CMShm: Searching for system : TIC15
CMShm: Get system Child Number
CMShm: Searching for system : TIC16
CMShm: Get system Child Number
CMShm: Searching for system : TRFSV1
CMShm: Get system Child Number
CMShm: Searching for system : TRFSV4
CMShm: Get system Child Number
CMShm: Searching for system : TRFSV5
CMShm: Get system Child Number
Console Manager shutting down at user request
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
Waiting for ENS to exit...
All children exited, continuing with shutdown...
Termination mailbox message from unrecognised process (pid = 2234), ignoring.
CMShm: Set CM version
CMShm: Returning CM record
CMShm: Set CM PID
CMShm: Returning CM record
CMShm: Set CM start time
CMShm: Returning CM record
CMShm: Searching for FIRST system record
CMShm: Get system name
CMShm: Freeing record for system CTHFS1.
CMShm: Searching for system : CTHFS1
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC=000A54C0, PSL=0BC00000

  Improperly handled condition, image exit forced.

	Signal arguments	      Stack contents

	Number = 00000005		 7FEA33A0
	Name   = 0000000C		 00000000
		 00000000		 27FC0000
		 00000000		 7FEA26C8
		 000A54C0		 7FEA2690
		 0BC00000		 000A57C0
					 00000073
					 00000019
					 00000000
					 0000FE2C

	Register dump

	R0 = 0400FFFF  R1 = 00000000  R2 = FFFFFFFF  R3 = 00000019
	R4 = 00000000  R5 = 0000FE2C  R6 = 000E3E90  R7 = 000C259C
	R8 = 00000000  R9 = 00000000  R10= 0000FFFF  R11= 00011684
	AP = 7FEA25FC  FP = 7FEA25BC  SP = 7FEA2638  PC = 000A54C0
	PSL= 0BC00000

  SYSTEM       job terminated at 30-JUN-1995 08:45:42.49

  Accounting information:
  Buffered I/O count:             132         Peak working set size:    1692
  Direct I/O count:               176         Peak page file size:      5918
  Page faults:                   2083         Mounted volumes:             0
  Charged CPU time:           0 00:00:08.53   Elapsed time:     0 00:05:03.35




=================================CONTROLLER_01.LOG==========================


$ !
$ ! This is the CTHVCS Cluster System Wide Login File
$ !
$ SAVE_VERIFY = F$ENVIRONMENT("VERIFY_PROCEDURE")
$ SET VERIFY  = NOPROCEDURE
$ EXIT
$ !
$ ! Start a Child Controller process, name_num 1, child_num 1
$ !
$ CHILD :== $CONSOLE$IMAGE:CONSOLE$DAEMON.EXE
$ CHILD "child" 1
POLYCENTER Console Manager
Console Controller Daemon Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

CMShm: Returning HEADER record
CMShm: Mapped to section, reference count = 1
CMCreateEventPort: Opening local transport event port <ENS>
CMCreateEventPort: Open succeeded
CMShm: Searching for system : CTHFS1
CMShm: Get system Child Number
CMShm: Searching for system : DPSDEV
CMShm: Get system Child Number
CMShm: Searching for system : DPSDEVHSC
CMShm: Get system Child Number
CMShm: Searching for system : FSHSCA
CMShm: Get system Child Number
CMShm: Searching for system : HSJ000
CMShm: Get system Child Number
CMShm: Searching for system : HSJ001
CMShm: Get system Child Number
CMShm: Searching for system : TIC15
CMShm: Get system Child Number
CMShm: Searching for system : TIC16
CMShm: Get system Child Number
CMShm: Searching for system : TRFSV1
CMShm: Get system Child Number
CMShm: Searching for system : TRFSV4
CMShm: Get system Child Number
CMShm: Searching for system : TRFSV5
CMShm: Get system Child Number
CMShm: Searching for system : CTHFS1
CMShm: Set system PID
CMShm: Searching for system : CTHFS1
CMShm: Set system transport
CMShm: Searching for system : CTHFS1
CMShm: Set system status
Console port open failure for CTHFS1
Open failure on LAT terminal (server: LAT378  port: VCS04)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : CTHFS1
CMShm: Set system status
CMShm: Searching for system : CTHFS1
CMShm: Set system user name
CMShm: Searching for system : CTHFS1
CMShm: Set system status
CMShm: Searching for system : DPSDEV
CMShm: Set system PID
CMShm: Searching for system : DPSDEV
CMShm: Set system transport
CMShm: Searching for system : DPSDEV
CMShm: Set system status
Console port open failure for DPSDEV
Open failure on LAT terminal (server: LAT378  port: VCS02)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : DPSDEV
CMShm: Set system status
CMShm: Searching for system : DPSDEV
CMShm: Set system user name
CMShm: Searching for system : DPSDEV
CMShm: Set system status
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system PID
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system transport
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system status
Console port open failure for DPSDEVHSC
Open failure on LAT terminal (server: LAT378  port: VCS03)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system status
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system user name
CMShm: Searching for system : DPSDEVHSC
CMShm: Set system status
CMShm: Searching for system : FSHSCA
CMShm: Set system PID
CMShm: Searching for system : FSHSCA
CMShm: Set system transport
CMShm: Searching for system : FSHSCA
CMShm: Set system status
Console port open failure for FSHSCA
Open failure on LAT terminal (server: LAT379  port: VCS05)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : FSHSCA
CMShm: Set system status
CMShm: Searching for system : FSHSCA
CMShm: Set system user name
CMShm: Searching for system : FSHSCA
CMShm: Set system status
CMShm: Searching for system : HSJ000
CMShm: Set system PID
CMShm: Searching for system : HSJ000
CMShm: Set system transport
CMShm: Searching for system : HSJ000
CMShm: Set system status
Console port open failure for HSJ000
Open failure on LAT terminal (server: LAT379  port: VCS03)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : HSJ000
CMShm: Set system status
CMShm: Searching for system : HSJ000
CMShm: Set system user name
CMShm: Searching for system : HSJ000
CMShm: Set system status
CMShm: Searching for system : HSJ001
CMShm: Set system PID
CMShm: Searching for system : HSJ001
CMShm: Set system transport
CMShm: Searching for system : HSJ001
CMShm: Set system status
Console port open failure for HSJ001
Open failure on LAT terminal (server: LAT379  port: VCS04)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : HSJ001
CMShm: Set system status
CMShm: Searching for system : HSJ001
CMShm: Set system user name
CMShm: Searching for system : HSJ001
CMShm: Set system status
CMShm: Searching for system : TIC15
CMShm: Set system PID
CMShm: Searching for system : TIC15
CMShm: Set system transport
CMShm: Searching for system : TIC15
CMShm: Set system status
Console port open failure for TIC15
Open failure on LAT terminal (server: LAT379  port: VCS02)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : TIC15
CMShm: Set system status
CMShm: Searching for system : TIC15
CMShm: Set system user name
CMShm: Searching for system : TIC15
CMShm: Set system status
CMShm: Searching for system : TIC16
CMShm: Set system PID
CMShm: Searching for system : TIC16
CMShm: Set system transport
CMShm: Searching for system : TIC16
CMShm: Set system status
Console port open failure for TIC16
Open failure on LAT terminal (server: LAT379  port: VCS01)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : TIC16
CMShm: Set system status
CMShm: Searching for system : TIC16
CMShm: Set system user name
CMShm: Searching for system : TIC16
CMShm: Set system status
CMShm: Searching for system : TRFSV1
CMShm: Set system PID
CMShm: Searching for system : TRFSV1
CMShm: Set system transport
CMShm: Searching for system : TRFSV1
CMShm: Set system status
Console port open failure for TRFSV1
Open failure on LAT terminal (server: LAT379  port: VCS07)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : TRFSV1
CMShm: Set system status
CMShm: Searching for system : TRFSV1
CMShm: Set system user name
CMShm: Searching for system : TRFSV1
CMShm: Set system status
CMShm: Searching for system : TRFSV4
CMShm: Set system PID
CMShm: Searching for system : TRFSV4
CMShm: Set system transport
CMShm: Searching for system : TRFSV4
CMShm: Set system status
Console port open failure for TRFSV4
Open failure on LAT terminal (server: LAT379  port: VCS06)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : TRFSV4
CMShm: Set system status
CMShm: Searching for system : TRFSV4
CMShm: Set system user name
CMShm: Searching for system : TRFSV4
CMShm: Set system status
CMShm: Searching for system : TRFSV5
CMShm: Set system PID
CMShm: Searching for system : TRFSV5
CMShm: Set system transport
CMShm: Searching for system : TRFSV5
CMShm: Set system status
Console port open failure for TRFSV5
Open failure on LAT terminal (server: LAT379  port: VCS08)
%SYSTEM-F-ABORT, abort
CMShm: Get Reconfigure flag
CMShm: Returning HEADER record
CMShm: Searching for system : TRFSV5
CMShm: Set system status
CMShm: Searching for system : TRFSV5
CMShm: Set system user name
CMShm: Searching for system : TRFSV5
CMShm: Set system status
$ EXIT $STATUS
  SYSTEM       job terminated at 30-JUN-1995 08:45:34.89

  Accounting information:
  Buffered I/O count:             111         Peak working set size:    1531
  Direct I/O count:                34         Peak page file size:      5790
  Page faults:                   1877         Mounted volumes:             0
  Charged CPU time:           0 00:02:07.34   Elapsed time:     0 00:04:42.43




===============================CONSOLE$ENS_DAEMON.LOG===================


$ !
$ ! This is the CTHVCS Cluster System Wide Login File
$ !
$ SAVE_VERIFY = F$ENVIRONMENT("VERIFY_PROCEDURE")
$ SET VERIFY  = NOPROCEDURE
$ EXIT
$ !
$ ! Start Parent Controller process, this has child index of "0"$ !
$ DAEMON :== $CONSOLE$IMAGE:CONSOLE$ENS_DAEMON.EXE
$ DAEMON 
POLYCENTER Console Manager
Event Notification Services Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

CONSOLE$ENS_DAEMON: Starting
  Event Sequencing starts at 2234,1 (146407425)

CMShm: Returning HEADER record
CMShm: Mapped to section, reference count = 1
CMShm: Set ENS start time
CMShm: Returning ENS record
CMShm: Set ENS PID
CMShm: Returning ENS record
CMShm: Reset ENS event source count
CMShm: Returning ENS record
CMShm: Reset ENS C3 count
CMShm: Returning ENS record
CMShm: Reset ENS monitor count
CMShm: Returning ENS record
CMShm: Reset ENS active actions count
CMShm: Returning ENS record
CMShm: Reset ENS despatched actions count
CMShm: Returning ENS record
CMShm: Reset ENS failed actions count
CMShm: Returning ENS record
CMShm: Set ENS version
CMShm: Returning ENS record
CMCreateEventListener: Creating Event listener <ENS>
CMCreateEventListener: Create succeeded
CMCreateEventListener: Creating Event listener <ENS_MONITOR>
CMCreateEventListener: Create succeeded
CMCreateEventListener: Creating Event listener <ENS_C3>
CMCreateEventListener: Create succeeded
CONSOLE$ENS_DAEMON: Event Preprocessing enabled
CMCreateEventListener: Creating Event listener <ENS_PREPROCESSOR>
CMCreateEventListener: Create succeeded
CMCreateEventListener: Creating Event listener <ENS_POSTPROCESSOR>
CMCreateEventListener: Create succeeded
CONSOLE$ENS_DAEMON: Establishing exit handler
CONSOLE$ENS_DAEMON: Establishing signal handlers
CONSOLE$ENS_DAEMON: Starting garbage collection at 30 second intervals
CONSOLE$ENS_DAEMON: Entering CMMainLoop
CONSOLE$ENS_DAEMON: Event port Connected - Event Source
CMShm: Increment ENS event source count
CMShm: Returning ENS record
CONSOLE$ENS_DAEMON: Event port Connected - Event Source
CMShm: Increment ENS event source count
CMShm: Returning ENS record
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 1 (146407425)
CMShm: Searching for system : CTHFS1
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : CTHFS1
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system CTHFS1 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 3
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 2 (146407426)
CMShm: Searching for system : DPSDEV
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : DPSDEV
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system DPSDEV - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 3
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 3 (146407427)
CMShm: Searching for system : DPSDEVHSC
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : DPSDEVHSC
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system DPSDEVHSC - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 3
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 4 (146407428)
CMShm: Searching for system : FSHSCA
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : FSHSCA
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system FSHSCA - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 2147483647
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 5 (146407429)
CMShm: Searching for system : HSJ000
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : HSJ000
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system HSJ000 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 16777215
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 6 (146407430)
CMShm: Searching for system : HSJ001
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : HSJ001
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system HSJ001 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 16777215
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 7 (146407431)
CMShm: Searching for system : TIC15
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : TIC15
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system TIC15 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 16777215
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 8 (146407432)
CMShm: Searching for system : TIC16
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : TIC16
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system TIC16 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 16777215
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 9 (146407433)
CMShm: Searching for system : TRFSV1
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : TRFSV1
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system TRFSV1 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 2147483647
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 10 (146407434)
CMShm: Searching for system : TRFSV4
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : TRFSV4
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system TRFSV4 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 16777215
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Console NOT Found
      Details are:
      S.No.     : 2234, 11 (146407435)
CMShm: Searching for system : TRFSV5
CMShm: Increment system event priority count
CMShm: Increment system event priority count
      Type      : 1
      System    : TRFSV5
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Unable to open console for system TRFSV5 - %SYSTEM-F-ABORT, abort
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 16777215
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End
GC: Start
Completed Action GC: Start
Completed Action GC: End
GC: End
CONSOLE$ENS_DAEMON: eventport_error Callback
    errno_val : 0
         msg1 : Read error on Local socket ENS
         msg2 : error 0
CONSOLE$ENS_DAEMON: Interface Disconnected on Error - Event Source - Port
CMShm: Decrement ENS event source count
CMShm: Returning ENS record
CMCloseEventPort: Closing Event Port <ENS>
CMCloseEventPort: Closing socket associated with event port ... done.

CONSOLE$ENS_DAEMON: Event received from Source - CMgr Shutdown
      Details are:
      S.No.     : 2234, 12 (146407436)
CMShm: Searching for system : ConsoleManager
CMShm: Returning NULL record, system not found
      Type      : 1
      System    : ConsoleManager
      SubSystem : CM Internal
      Source    : Console Manager
      Class     : CONSOLEmanager
      Info      : Console Manager has been shut down
    Finding suitable process name for action...
Process name for action will be      : Kanata Comm 001
Eventport name for action will be    : Kanata_Comm_001
Command file name for action will be : CONSOLE$TMP:Kanata_Comm_001.COM
Log file name for action will be     : CONSOLE$TMP:Kanata_Comm_001.LOG
CONSOLE$ENS_DAEMON: Failed to create file CONSOLE$TMP:Kanata_Comm_001.COM for action
PU�UЬPՠ
ݠ����: reason (errno) = 2146054476
execute failed, removing running entry
CONSOLE$ENS_DAEMON: Event processing complete

CONSOLE$ENS_DAEMON: Message received via control socket

CONSOLE$ENS_DAEMON: Requesting MainLoop exit

CONSOLE$ENS_DAEMON: Message processing complete.

CONSOLE$ENS_DAEMON: Performing Exit Handler cleanup ...
CONSOLE$ENS_DAEMON: Closing Source event port  - 998192
CMCloseEventPort: Closing Event Port <ENS>
CMCloseEventPort: Closing socket associated with event port ... done.
CMShm: Set ENS start time
CMShm: Returning ENS record
CMShm: Set ENS PID
CMShm: Returning ENS record
CMShm: Reset ENS active actions count
CMShm: Returning ENS record
CMShm: Reset ENS despatched actions count
CMShm: Returning ENS record
CMShm: Reset ENS event source count
CMShm: Returning ENS record
CMShm: Set ENS version
CMShm: Returning ENS record
CMShm: Reference count == 0, deleting shared memory from process space

CONSOLE$ENS_DAEMON: Exiting Now!!!
$ EXIT $STATUS
  SYSTEM       job terminated at 30-JUN-1995 08:45:40.88

  Accounting information:
  Buffered I/O count:              97         Peak working set size:    1276
  Direct I/O count:                87         Peak page file size:      4859
  Page faults:                   1135         Mounted volumes:             0
  Charged CPU time:           0 00:00:04.72   Elapsed time:     0 00:04:53.59
T.RTitleUserPersonal
Name		DateLines
846.1Weird...PYRO::RONRon S. van ZuylenSun Jul 02 1995 03:559
    We used V1.6 through almost every build and never saw this.  And we have
    a few hundred systems being monitored in real production.  (Running on
    OpenVMS VAX V6.1).
    
    Since the field test is over, you can escalate this problem in the normal
    fashion.  Posting in this conference will not get you immediate
    support.
    
    --Ron
846.2POLAR::HUTCHMike Hutchings, OMS Eastern Canada, KanataWed Jul 05 1995 18:0134
 Re .1

 Nice. I was expecting a "try this" or a "send us this logfile" response. I
 did not expect a bugger off reply.

> Posting in this conference will not get you immediate support.

 What are you talking about. Im most cases Notes IS the more timely way of
 getting help. The other occasions I've seen a response like this is when the
 noter does not know the answer or can't be bothered.

> And we have a few hundred systems being monitored in real production.

 And how many host PCM platforms does this represent I might ask? As PCM can
 support 200 consoles this could mean just 1 system!

 The system I upgraded was originally V1.5 without the MUP installed. Did you
 happen to test that upgrade path?


 Although I have little time to play around I thought I take another look
 myself. I discovered that the primary and secondary host fields were grayed
 out in the windows display. I checked a post upgrade export file and found
 that the Terminal_Device: parameter which is normally LTA0: was blank. The
 Primary_Host and Secondary_Host fields were also blank. I deleted the systems
 and recreated them with all the fields filled in. For some reason the
 Terminal_Device: remains blank. I'm fairly sure this is why all my LAT
 connections are failing (they do connect briefly). You would think something
 like this would be decernable in the debug logs. I even tried creating a
 whole new database but am still not able to get the Host fields to light up. 

 Now I'm downgrading.
846.3OPG::PHILIPAnd through the square window...Wed Jul 05 1995 18:4423
Mike,

  I dont know who Ron is in the previous reply, but he doesnt speak for
  the engineering team, however he is correct in that NOTES is not a
  reliable support mechanism and is in no way a substitute for the formal
  IPMT process which is used when you log a call with a CSC.

  The Primary/Secondary host fields DO ABSOLUTELY NOTHING, on OpenVMS, the
  Terminal_Device field for LAT connections also does ABSOLUTELY nothing.
  LAT devices get created by the software as and when it needs them.

  Dont worry about the "no such (global) section" message, this is normal
  if you have turned on debug.

  The "%SYSTEM-F-ABORT, abort" failure status message from your lat ports
  is the real problem here. Typically we have seen this problem because the
  Terminal Server is hung up, using TSM to connect to the terminal server
  and log the ports out, or rebooting the server usually fixes this for us.

  Hope this helps.

Cheers,
Phil
846.4RE: .2 - ouchPYRO::RONRon S. van ZuylenThu Jul 06 1995 22:1310
    Relax.  The reply shouldn't of been read as a "bugger off" reply.  I just
    wanted to show that there is a serious user of the software out there and
    that if you really needed production level support, you should log a call.
    We have 199 nodes being monitored on *one* OpenVMS VAX PCM V1.6 system
    right now.  All over LAT.  And it works.
    
    As noted, I'm not part of engineering, just a relatively satisfied user
    and field test victim.
    
    --Ron
846.5same problem58379::HUTCHMike Hutchings, OMS Eastern Canada, KanataFri Aug 18 1995 09:4114
 Hoping that the V1.6 ECO1 might contain a fix I decided it would be a good
 time to try the upgrade again. I experienced the same problem, namely lat
 port connection aborts

 These lat ports are free. TSM and LCP both show them as being available.

 I downgraded again by re-installed V1.5-MUPA and lat ports would then connect
 properly.



 Re .3
 I usually don't have the luxury to be able log calls to the CSC as I'm internal
846.6CSC32::BUTTERWORTHGun Control is a steady hand.Fri Aug 18 1995 15:356
    May I access your system? You are the only person that has complained
    of this problem and most sites use LAT as the connect mehod. I'd like
    to see how things are configured.
    
    Regards,
      Dan
846.7problem is 2 circuits58379::HUTCHMike Hutchings, GPS Canada, KanataWed Dec 13 1995 13:5831
 I tried to upgrade another VMS system with Console Manager 1.6. This upgrade
 again had problems establishing connection to lat ports. I think I now know
 what the problem is. My systems are configured with 2 circuits. Most of the
 decservers that are utilized for the VCS connections are on a private lan,
 (the second circuit). These are the lat ports that V1.6 fails to connect to.
 Lat ports are reachable thru the first circuit but all lat ports on the
 second controller are failing.

 V1.5 had no problem working with multiple circuits. Is this a bug with V1.6
 or do I need to setup a logical or something to get CM to correctly use the
 second circuit?

 Mike


 ...this may help to better explain my configuration


KAVCS2> mcr latcp sho link/fu

Link Name:    VCS_EASYNET             Datalink Address:     AA-00-04-00-2E-E4
Device Name:  _EZA8:                  DECnet Address:       Enabled
Link State:   On

--------------------------------------------------------------------------------

Link Name:    VCS_BRANCH              Datalink Address:     AA-00-04-00-2E-E4
Device Name:  _XQA17:                 DECnet Address:       Enabled
Link State:   On