| Title: | POLYCENTER Console Manager |
| Notice: | Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS: |
| Moderator: | CSC32::BUTTERWORTH |
| Created: | Thu Aug 06 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1541 |
| Total number of notes: | 6564 |
Another call passed over from a colleague getting a first pass in here (couldn't find related topics etc) OSF/1 v3.0 r358 - Polycenter Console Manager Vunknown: When attached to a system console and the system is shutdown to console mode, the PCM display sometimes looses characters written from the console. This problem persist during the system startup phase, but once the system has booted, the problem goes away. Customer suspects something is resetting xon/xoff flow control behaviour (though I'm not so sure). NOTE: These characters are also missing in PCM's log of that console. There are also other non-printable ^G characters embedded in the logfile. NOTE: The DECserver involved is a DS900TM. thanks again for any help..... Jo
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 810.1 | I should get to speak to them today and find out for sure. | KERNEL::COFFEYJ | The Uk CSC Unix Girlie. | Wed Jun 14 1995 10:26 | 7 |
Does this by any chance sound like a 1.5 issue? It's the same customer as the other question so I wouldn't be suprised if they do turn out to be on an old version - thus easy answers to all their problems. | |||||
| 810.2 | ZEDAR::simon | Simon Jackson 830 x3879 | Wed Jun 14 1995 11:24 | 8 | |
Jo, I must admit I can't get a failure with the Pre-SSB kit of V1.6. The SSB kit is due for submission at the end of the week, so after that the customer could have a fully supported V1.6 kit. I suggest that this is the best thing to do as then we would be working from the same base platform if there is still a problem. Cheers Simon.... | |||||