[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

642.0. "Break over Telnet" by EEMELI::OJUSSILA (Olli Jussila, OMS Finland) Tue Mar 07 1995 20:55

    
    
    I have had problems sending break when telnet connection
    is used. Break work when lat is used.
    
    If I have MicroVAX II connected to DS300 and PCM have telnet
    connection to DS300 port should I be able to break MicroVAX II.
    If I connect terminal to console breaks works.
    
    -Olli
T.RTitleUserPersonal
Name		DateLines
642.1CSC32::BUTTERWORTHGun Control is a steady hand.Tue Mar 07 1995 22:5912
    >    If I have MicroVAX II connected to DS300 and PCM have telnet
    >    connection to DS300 port should I be able to break MicroVAX II.
    
    Yes you should! Your not the first person to report this. I would like
    to know what version of the DS300 software you are using. In one case,
    upgrading the server software has fixed the problem but this was on
    a different server type but we could certianly have the same problem
    within the DS300's!!
    
    Regs,
      Dan
642.2OPG::SIMONSimon Jackson @reo 830 X3879Wed Mar 08 1995 09:1614
Olli,
     nice to hear from you again. The answer to your problem is that you cannot
do TELNET break on the DECserver300 terminal server. The TELNET server in the 
DS300 never had any code to support the TELNET break protocol message so it just
gets dropped. The same was true of the forst DECserver 90TL software.

The good news is that if you run the DNAS software on a DS90TL DS90M DS700 DS900
then the code was added for TELNET break.

So I guess the answer is to trade in the old for the new.

Cheers Simon...

P.S. get a server with FlashRam  so it does not require a load host!!!
642.3ThanksEEMELI::OJUSSILAOlli Jussila, OMS FinlandMon Mar 13 1995 13:459
    
    Thanks again for your answers. With VAX4000's there is SET CONTROLP
    ENABLE workaround. It is good to know DS300 can handle remote break
    over telnet now we can start thinging other solutions.
    	
    Thanks,
    
    	-Olli
642.4OPG::SIMONSimon Jackson @reo 830 X3879Mon Mar 13 1995 17:0313
    
    Thanks again for your answers. With VAX4000's there is SET CONTROLP
    ENABLE workaround. It is good to know DS300 can handle remote break
    over telnet now we can start thinging other solutions.
    	
    Thanks,
    
    	-Olli
    
Correction Olli DS300 CANNOT handle TELNET break!!!! Just in case you are still
confused.

Cheers simon...