| Title: | POLYCENTER Console Manager |
| Notice: | Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS: |
| Moderator: | CSC32::BUTTERWORTH |
| Created: | Thu Aug 06 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1541 |
| Total number of notes: | 6564 |
Customer is running OpenVMS VAX V6.1; PCM V1.5; and the latest MUP. HE
has created a C3 with $CONSOLE C3. When attempting to "Connect" from
it; it fails with %SYSTEM-F-EXPRCLM. Customer is able to display
SYSTEM STATUS or EVENTS from the window, but not connect. Can also
create different decterms from same process.
AUTHORIZE process quotas are:
MAXJOBS = 0
MAXDETACH = 0
PRCLM = 32 (has been increased to 64 w/o any effect)
Any ideas or thoughts would be appreciated.
Thanks,
Susan M. Wahl
CSC/VMS/SYSMGT
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 622.1 | CSC32::BUTTERWORTH | Gun Control is a steady hand. | Tue Feb 21 1995 21:35 | 9 | |
Sue,
Does the C3 itself fail or do you get a blank decterm with an exquota
message? Assuming it's the C3 then I'd suspect BYTLM is too low. I'd
also suspect that the customer may have increased SYSGEN param
DEFMBXBUFQUO and the mailboxes being used for IPC etc. are consuming
a lot of BYTLM.
Regs,
Dan
| |||||
| 622.2 | Problem still exists and getting worse... | CSC32::S_WAHL | Wed Feb 22 1995 14:28 | 12 | |
Dan,
It appears to be the C3 - no window is being created. Customer had
BYTLM at 100,000 and we increased to 150,000 - no improvment. Customer
then rebooted on a scheudled autogen reboot only some of the consoles
would connect after that. A CONSOLE MONITOR displayed systems in a
"Port Open Failed" state. Is this related? Any futher ideas with the
EXPRCLM?
Thanks,
Susan
| |||||
| 622.3 | CSC32::BUTTERWORTH | Gun Control is a steady hand. | Fri Feb 24 1995 19:44 | 3 | |
This is being worked off-line.
dan
| |||||