Conference csc32::consolemanager

620.0. "IVP failure on non-Motif system - missing CONSOLE$EDITM.EXE" by KERNEL::TITCOMBER () Mon Feb 20 1995 16:50

    OpenVMS v6.1 

    PCM v1.5 

    Problem:

    A customer has attempted to install PCM v1.5 (without DEcwindows
    support) onto a VAX system, but the IVP fails due to a missing binary
    file (CONSOLE$DATA:EDITM.EXE). No errors are reported during the actual
    installation.

    He has attempted two installs, one from CD and another install from
    TK50. Both gave the same results.

    Checking the SPD I can see no requirement for DECWindows/Motif listed. 
    Is Motif required for the installation of PCM V1.5?

    Attached is a logfile of one of the failed installation attempts.


    Any help or answers would be greatly appreciated.


    Rich





    $ @SYS$UPDATE:VMSINSTAL CONSOLE015 TAPE$GEMINI OPTIONS N


        OpenVMS VAX Software Product Installation Procedure V6.1


It is 24-JAN-1995 at 16:39.

Enter a question mark (?) at any time for help.

%VMSINSTAL-W-ACTIVE, The following processes are still active:
        MRG$GATEWAY
        DDS$055_i1
        DDS$055_lt2
        DDS$055_lt1
        DDS$LSTN_055_1
        MRLOGGER
        MR$T_N_1
        MRLIST_1401000E
        MRX$GATEWAY
        MRLIST_14010010
        PERRY_A
        OPENV_Server
        GUILBERT_P
        A1MAIL$PRINT
        MUAS$SERVER_000
        MRLIST_14020034
        OPENV_Agent_1
        A1MAIL$CONNECT
        A1M$DI_1402003D
        A1M$DI_1402003F
        A1M$DI_14020041
        A1M$DI_14020043
        A1M$DI_14020045
        SNS$WATCHDOG
        _LTA5039:
* Do you want to continue anyway [NO]? yes
* Are you satisfied with the backup of your system disk [YES]? 


The following products will be processed:

  CONSOLE V1.5


        Beginning installation of CONSOLE V1.5 at 16:39

%VMSINSTAL-I-RESTORE, Restoring product save set A ...

    Release notes included with this kit are always copied to SYS$HELP.

    Additional Release Notes Options:

        1.  Display release notes
        2.  Print release notes
        3.  Both 1 and 2
        4.  None of the above

* Select option [2]: 4
* Do you want to continue the installation [NO]? yes
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.

    POLYCENTER Console Manager V1.5

    Copyright Digital Equipment Corporation 1993, 1994. All rights reserved.

    Restricted Rights: Use, duplication, or disclosure by the U.S.
    Government is subject to restrictions as set forth in subparagraph
    (c) (1) (ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FAR
    52.227-14 Alt. III, as applicable.

    This software is proprietary to and embodies the confidential
    technology of Digital Equipment Corporation. Possession, use, or
    copying of this software and media is authorized only pursuant to a
    valid written license from Digital or an authorized sublicensor.

* Do you want to purge files replaced by this installation [YES]? 
* Do you want to run the IVP after the installation [YES]? 

 ****************************************************************************
 *                                                                           
 *  The minimum supported version of TCPIP Services for VMS is not installed 
 *  on this system. You may install TCPIP Services for VMS after the         
 *  completion of this installation.                                         
 *                                                                           
 *  NOTE: Console Manager connections using TELNET as a transport CAN NOT be 
 *        established until TCPIP Services for VMS has been installed and    
 *        configured.                                                        
 *                                                                           
 ****************************************************************************


 ***************************************************************************
 *                                                                         *
 * The logical name "DECW$SYSTEM_DEFAULTS" is NOT defined on this system.  *
 * This installation will not install the DECwindows dependant files       *
 * during this installation.                                               *
 *                                                                         *
 ***************************************************************************

* Please specify the disk for Console Manager files [SYS$SYSDEVICE]: 
* Do you wish to install the British English UID files [NO]? 

  In order to edit the Console Manager database from an account other than
  "SYSTEM" there must be an entry in the database for the user wishing to
  perform the edit.

  Please enter the usernames for those users who will be granted full
  Console Manager privileges, terminate your input with a <RETURN>

* Username of user to add (Return to end): down_g
* Username of user to add (Return to end): green_b
* Username of user to add (Return to end): 

  You responded "YES" in response to the IVP question, in order to 
  successfully execute the IVP, extra information is required.


  It is possible to execute a graphical portion of the IVP, this will
  display the configuration editor, followed by the C3 on a workstation
  of your choice.

  NOTE: When the IVP displays the graphical components of POLYCENTER
        Console Manager on your screen, in order for the IVP and this
        installation to complete, you should exit from the components
        which appear using the "Exit" option on the "File" menu for
        each interface.

* Do you wish execute the Graphical tests [NO]? 
     
    This installation will take continue for between 5 and 15 minutes
    depending on your system configuration.

%CONSOLE-I-NOMOREQ, No more questions will be asked.
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  SYS$SYSDEVIC
CONSOLE].
%CREATE-I-EXISTS, SYS$SYSDEVICE:[CONSOLE] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
ATA].
%CREATE-I-EXISTS, CONSOLE$ROOT:[DATA] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
XAMPLES].
%CREATE-I-EXISTS, CONSOLE$ROOT:[EXAMPLES] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
EMPLATES].
%CREATE-I-EXISTS, CONSOLE$ROOT:[TEMPLATES] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
OG].
%CREATE-I-EXISTS, CONSOLE$ROOT:[LOG] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
EMP].
%CREATE-I-EXISTS, CONSOLE$ROOT:[TEMP] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
MAGES].
%CREATE-I-EXISTS, CONSOLE$ROOT:[IMAGES] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
RCHIVE].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ARCHIVE] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
CTIONS].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ACTIONS] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
CTIONS.SYSTEM].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ACTIONS.SYSTEM] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
CTIONS.USER].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ACTIONS.USER] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
CONS].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ICONS] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
CONS.SYSTEM].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ICONS.SYSTEM] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
CONS.USER].
%CREATE-I-EXISTS, CONSOLE$ROOT:[ICONS.USER] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
PP-DEFAULTS].
%CREATE-I-EXISTS, CONSOLE$ROOT:[APP-DEFAULTS] already exists
%VMSINSTAL-I-SYSDIR, This product creates system disk directory  CONSOLE$ROOT
OOKS].
%CREATE-I-EXISTS, CONSOLE$ROOT:[BOOKS] already exists
%VMSINSTAL-I-RESTORE, Restoring product save set B ...
%VMSINSTAL-I-RESTORE, Restoring product save set C ...
%CONSOLE-I-SKIPSET, Skipping product saveset D (AXP only) ...
%CONSOLE-I-UPDATEDCL, Updating DCL tables
%CONSOLE-I-UPDATEHELP, Updating System Help library


      POLYCENTER Console Manager Version 1.5 Installation is completed.

      Please add the following line to your system startup procedure:

      $ @SYS$STARTUP:CONSOLE$STARTUP.COM

%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories..
%CONSOLE-I-POSTINSTALL, Starting the POLYCENTER Console Manager Post installa
n tasks.
%CONSOLE-I-CHECKFORDB, Checking for existing database file

  No previous Database file exists on the system. Please ignore
  any "Cannot open input file: CONSOLE$DATA:CONSOLE_CFG.DAT"
  messages, this is normal.

%CONSOLE-I-CREATENEWDB, Creating system default database file
%DCL-W-ACTIMAGE, error activating image DECW$DXMLIBSHR
-CLI-E-IMAGEFNF, image file not found PHOTON$DKA100:[SYS0.SYSCOMMON.][SYSLIB]
W$DXMLIBSHR.EXE;

            Copyright (c) Digital Equipment Corporation, 1994

              Starting IVP for POLYCENTER Console Manager
              ===========================================


 Checking Files......


 Startup Files


 Binary files

 Console IVP Fatal: Missing File CONSOLE$IMAGE:CONSOLE$EDITM.EXE

 Exiting...


        Installation of CONSOLE V1.5 completed at 16:42


        VMSINSTAL procedure done at 16:42


    

Yes,
     Motif does need to be installed as we use some of the run time sharable
images. However, in the customers case where there is no graphic hardware he
does not need a Motif license.

The SPD should mention this I shall get an addendum put out.

Cheers Simon....

    Hi,
    
    	is it still true that Motif must be INSTALLED, but need not be
    licenced in PCM v1.6?
    
    The SPD _still_ lists it as a S/W pre-req, even though .1 suggested
    that the words may be amended for v1.5!
    
    Cheers,
    
    mb

    The IVP will fail but PCM should run. You will obviously not be able to
    use any of the GUI's. 
    
    Regs,
      Dan

    Dan,
    
    thanks for the info. I am trying to convince my customer that the whole
    point behind PCM is the graffical interfais, but sometimes common sense
    fails!
    
    Cheers,
    
    mb