[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

353.0. "MONITOR subprocess in COM state" by CSC32::N_SCHENK () Tue Aug 16 1994 22:34

    Hi,
    
    I have come across a problem in which the subprocess that is created
    on behalf of the CONSOLE MONITOR interface goes into a COM state
    and is shown to be using 90%+ of the CPU.
    
    VAX 4000/60 MOTIF V1.2, VMS V6.1, PCM V1.5
    
    SETUP:
    
    Customer sets up the width to 132 columns from the options menu in the
    decterm first and saves it.  This may be related.   Customer also
    tried this by using the "SET WIDTH 132" command from the MONITOR
    interface COMMAND prompt.  In both cases the hang problem occurs.
    
    From the C3 customer double clicks on the node and gets the monitor
    interface than connects to the system.  At this point he does a CTRL/G and
    then enters a SELECT node-name at the COMMAND prompt, then another
    CTRL/G.
    
    The window goes blank and we see that the subprocess is in a COM state
    taking 90%+ CPU.
    
    Any ideas on this is greatly appreciated.
    
    Nancy Schenk
T.RTitleUserPersonal
Name		DateLines
353.1OPG::PHILIPAnd through the square window...Wed Aug 17 1994 13:3710
Nancy,

  I have no ideas about this, I have added it to our "bug" list and will take
  a look at it as time permits.

  Thanks for letting us know about it.

Cheers,
Phil
353.2pc samples?CX3PST::ANASAZ::J_BECKERThere's no substitute for a good bootThu Aug 18 1994 20:249
>    The window goes blank and we see that the subprocess is in a COM state
>    taking 90%+ CPU.
>    


any pc samples?  


thanks jb