[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

329.0. "Restarting console eventlist" by SUPER7::HUGHESA (Swimming against the tide @#%*) Wed Aug 03 1994 11:46

	There is a problem with PCM v1.5 and attempting to restart the
	eventlist from the "file" pull down menu.

	If you specify the qualifiers (or at least one) it restarts ok,
	otherwise if you simply use the command CONSOLE EVENTLIST it
	fails to restart with the error;

	%DCL-W-NULFIL, missing or invalid file specification - respecify

	I undertook the following tests, by firing up an eventlist and then
	restarting it using the pull down menu.

Andy.

SUPER7>console eventlist/node=super7/screen=0/server=0/transport=decnet
SUPER7>console eventlist/screen=0/server=0/transport=decnet
SUPER7>console eventlist/screen=0/transport=decnet
SUPER7>console eventlist/transport=decnet
SUPER7>console eventlist/node=super7
SUPER7>console eventlist
%DCL-W-NULFIL, missing or invalid file specification - respecify
SUPER7>
T.RTitleUserPersonal
Name		DateLines
329.1OPG::PHILIPAnd through the square window...Wed Aug 03 1994 12:018
Andy,

  We know about this and I have a fix in the works.

  Thanks for reporting it anyway.

Cheers,
Phil
329.2Console eventlistWELSWS::FINLAYSONAThu Dec 15 1994 12:2845
    Hi
    
    I have found a similar problem to 0 and, excuse my ignorance but is
    the new version available yet and will it fix the following ?
    
    The problem I have seen is this :
    
    	Logged into the PCM system using TCPIP and set my display back to
        my workstation, using the workstations IP address, (not the
    	nodename).
    
    	Console C3 works fine .
    	Console edit works fine.
    
    	If I have "Display eventlist window at startup" set on the C3
    	display I get 
    
    	%DCL-W-PARMDEL, invalid parameter delimiter
    
    	and the eventlist does not display.
    
    	Back on the PCM system from DCL.
    
    	Console eventlist works fine.
    
    	Console eventlist/node=ip_address/transport=tcpip 
    
    	gives   %DCL-W-PARMDEL, invalid parameter delimiter
    	
        If I use the nodename it works fine.
    
    	I'm not 100% sure using the address is supported. I'm using it
    	because I have a set of commands in SYLOGIN.COM to setup the
    	display on login and using the address is the easiest solution. 
    
        
    Any help would be appreciated
    
    
    
    Regards
    
    
    Alan
329.3OPG::PHILIPAnd through the square window...Thu Dec 15 1994 12:5411
Alan,

  The problem described in .0 is indeed fixed in the MUP
  kit we are trying to finish.

  You have a different problem and looking at the code, I
  see why, I will see if I can fix this for the MUP kit,
  no promises though.

Cheers,
Phil
329.4prayWELSWS::FINLAYSONAThu Dec 15 1994 16:178
    Phil
    
    Thanks for the prompt reply, I'll await the MUP kit and hope.
    
    Cheers
    
    
    Alan
329.5OPG::PHILIPAnd through the square window...Thu Dec 15 1994 16:207
Alan,

  Your prayers will be answered, the fix is in, well, it works for me
  anyway, but then again this stuff always works for me ;-).

Cheers,
Phil