The data below is a ROUGH guide as to the memory required for PCM version 1.1.
The data was obtained from the systems used to test PCM under load conditions.
It should be stressed that the figures given are approximations only and that
variations in individual configurations may vary these figures.
OpenVMS VAX:
------------
Primary Daemon 1.0 Mbytes.
Console Daemon 2.5 Mbytes.
(16 lines)
ENS Daemon 1.0 Mbytes.
C3 GUI Main 2.5 Mbytes. Note: This does not include the Eventlist
attached to the C3.
Eventlist 3.5 Mbytes. Note: This is an eventlist which stores
1000 events in the list.
Example:
Memory required for a system with 128 managed systems and using 5 C3 displays
running concurrently each showing an Eventlist window.
Primary Daemon 1.0
ENS Daemon 1.0
Console Daemon 2.5 x 8
C3 GUI Main 2.5 x 5
Eventlist 3.5 x 5
----------
Total 52 M Bytes.
----------
These figures do NOT include memory requirements for other system components
e.g. operating system.
OpenVMS AXP:
------------
Primary Daemon 1.5 Mbytes.
Console Daemon 3.5 Mbytes.
(16 lines)
ENS Daemon 1.5 Mbytes.
C3 GUI Main 4.0 Mbytes. Note: This does not include the Eventlist
attached to the C3.
Eventlist 6.0 Mbytes. Note: This is an eventlist which stores
1000 events in the list.
Example:
Memory required for a system with 128 managed systems and using 5 C3 displays
running concurrently each showing an Eventlist window.
Primary Daem
on 1.5
ENS Daemon 1.5
Console Daemon 3.5 x 8
C3 GUI Main 4.0 x 5
Eventlist 6.0 x 5
----------
Total 81 M Bytes.
----------
These figures do NOT include memory requirements for other system components
e.g. operating system.
OSF/1:
------
Primary Daemon 1.0 Mbytes.
Console Daemon 2.0 Mbytes.
(16 lines)
ENS Daemon 0.5 Mbytes.
C3 GUI Main 2.5 Mbytes. Note: This does not include the Eventlist
attached to the C3.
Eventlist 4.0 Mbytes. Note: This is an eventlist which stores
1000 events in the list.
Example:
Memory required for a system with 128 managed systems and using 5 C3 displays
running concurrently each showing an Eventlist window.
Primary Daemon 1.0
ENS Daemon 0.5
Console Daemon 2.0 x 8
C3 GUI Main 2.5 x 5
Eventlist 4.0 x 5
----------
Total 50 MBytes.
----------
These figures do NOT include memory requirements for other system components
e.g. operating system.
ULTRIX:
-------
Primary Daemon 0.5 Mbytes.
Console Daemon 1.0 Mbytes.
(16 lines)
ENS Daemon 0.5 Mbytes.
C3 GUI Main 2.0 Mbytes. Note: This does not include the Eventlist
attached to the C3.
Eventlist 2.5 Mbytes. Note: This is an eventlist which stores
1000 events in the list.
Example:
Memory required for a system with 128 managed systems and using 5 C3 displays
running concurrently each showing an Eventlist window.
Primary Daemon 0.5
ENS Daemon 0.5
Console Daemon 1.0 x 8
C3 GUI Main 2.0 x 5
Eventlist 2.5 x 5
----------
Total 31.5 MBytes.
----------
These figures do NOT include memory requirements for other system components
e.g. operating system.
............................................................................................................................................................................................................................................................................................................
|