| Date Of Receipt: 3-SEP-1996 15:43:45.64
From: FLUME::"[email protected]" "03-Sep-1996 1541"
To: [email protected]
CC: [email protected], [email protected]
Subj: Re: Hi Josh, could you help out with this one? Thanks a lot.
Just looked at this in RCS. This file is almost 18MB and Joe has 14 private
branches of it.
Joseph_Melvin: 1.1.95.1
Joseph_Melvin: 1.1.83.1
Joseph_Melvin: 1.1.70.1
Joseph_Melvin: 1.1.69.1
Joseph_Melvin: 1.1.57.1
Joseph_Melvin_A___isp1020_v32de1: 1.1.96
Joseph_Melvin_A_v32fsupportos_nightly: 1.1.85
Joseph_Melvin_A_isp1020_v40: 1.1.83
Joseph_Melvin_A_isp1020_v32f: 1.1.82
Joseph_Melvin_A_isp1020_v32de2: 1.1.81
Joseph_Melvin_A_isp1020_v32de1: 1.1.78
Joseph_Melvin_MGO102180_v32d1: 1.1.70
Joseph_Melvin_MGO102180_v32d2: 1.1.69
Joseph_Melvin_v32c_supp_nightly_MGO102049: 1.1.57
|
| ------- Forwarded Message
|
| Return-Path: [email protected]
| Delivery-Date: Tue, 03 Sep 96 15:27:04 -0400
| Return-Path: [email protected]
| Received: from DECnet-Mail11.flume.zk3.dec.com by flume.zk3.dec.com;
| (5.65v3.2/1.1.8.2/16Jan95-0946AM)
| id AA23625; Tue, 3 Sep 1996 15:26:21 -0400
| Date: Tue, 3 Sep 1996 15:26:20 -0400
| Message-Id: <[email protected]>
| Mime-Version: 1.0
| From: [email protected] (USEG #381-1593 @ZKO3-2/T21)
| To: [email protected]
| Cc: MELVIN
| Subject: Here is the bsubmit trace for what I tried to do. Thanks1 -Joe
| Content-Type: text/plain; charset=US-ASCII
| Content-Transfer-Encoding: 7bit
|
| From: RUSURE::MELVIN "USEG #381-1593 @ZKO3-2/T21" 29-AUG-1996
| 11:22:48.89
| To: WASTED::ODEHELP
| CC: MELVIN
| Subj: Help needed on failure during bsubmit under de1supportos.nightly
|
|
| I am having trouble getting a bsubmit done into the V32de1 support
| pool (nightly). When I originally did the bsubmit, I received the
| error given below. Any idea what I am doing wrong this time (other
| pools, with similar bsubmits have worked fine). Can I delete any
| of the tracking files to basically 'reset' this and just do a fresh
| bsubmit (without the need for -resub)? Thanks in advance.
|
| At the very end of this message is an attempt to do the -resub
| using -verbose -debug -odedebug cvs (at Josh Friedman's suggestion).
|
| - -Joe Melvin
| USEG
|
| =============================================================================
==
| ==== original bsubmit
|
| jmroid> bsubmit -all
| Enter the defect number this submission applies to: v32de1supportos-60-melvin
|
|
| Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes]
|
| *** No user interaction will be required during the merge step. ***
| [ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]
| [ ./kernel/io/cam/qlogic/isp1020.h checked in onto branch 1.1.63 ]
|
| Please take appropriate steps and re-submit.
|
| *** RE-SUBMISSION REQUIRED ***
|
| - - Source control information is in an intermediate state.
| - - Re-submit using -resub 17:07 [ -date 8/26/96 ]
|
|
|
| The above is totally devoid of content to let me know what was going on. The
| files were outdated, even though the submit did not successfully go through.
| They do not appear have been puit into the de1 support pool either. When I
| try to do the -resub as 'suggested', I get the following:
|
|
| jmroid> bsubmit -resub 17:07 -date 8/26/96 -verbose
| Enter the defect number this submission applies to: v32de1supportos-60-melvin
|
| > build to submit to is: v32de1supportos.
| > Time is: 10:04; date is: 8/29/96.
| > cd'ing to sandbox source directory: /SANDBOX3/A___isp1020_v32de1/src.
| > checking for lock on build: /usr/sde/osf1/build/v32de1supportos/src/.BCSlo
ck
| > checking access control list on submit
| Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes] ye
s
| > Checking environment...
| > checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| > checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| > Submitting the following files:
| > ./kernel/io/cam/qlogic/isp1020.c
| > ./kernel/io/cam/qlogic/isp1020.h
| > Validating submission...
| > Common ancestor -p1.1.39.3, merge required
| > Common ancestor -p1.1.27.2, merge required
| > Checking files in; Set: 'V32DE1SUPPORTOS'
| > ./kernel/io/cam/qlogic/isp1020.c
| > Scanning for HISTORY and $Log...$ messages
| [ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]
|
| Please take appropriate steps and re-submit.
|
| *** RE-SUBMISSION REQUIRED ***
|
| - - Source control information is in an intermediate state.
| - - Re-submit using -resub 17:07 [ -date 8/26/96 ]
|
|
|
| =============================================================================
==
| =============================================================================
==
|
|
|
| jmroid> !5
| bsubmit -resub 17:07 -date 8/26/96 -verbose -debug -odedebug csv
| Enter the defect number this submission applies to: v32de1supportos-60-melvin
|
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 1 : -nolog: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -local_co: maxe=1; dup=0; mina=0; maxa=2; a=backing lock.
| >> 3 : -sb: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -resub: maxe=1; dup=0; mina=1; maxa=1; a=[0-9]:[0-5][0-9]
| [12][0-9]:[0-5][0-9].
| >> e=-resub; numa=1; nume=1.
| >> arg: 17:07.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 13: -novisual: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -tag: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 14: -all: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 16: -config: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 17: -auto_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 19: -auto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -l: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> -visual: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -log: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> -m: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 22: -no_merge: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 25: -noauto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> !-*: maxe=-1; dup=0; mina=0; maxa=0; a=.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 30: -defect: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> e=-defect; numa=1; nume=1.
| >> arg: v32de1supportos-60-melvin.
| >> 32: -date: maxe=1; dup=0; mina=1; maxa=1; a=[1-9]/[1-9]/[0-9][0-9]
| [1-9]/[1-3][0-9]/[0-9][0-9] 1[0-2]/[1-9]/[0-9][0-9]
| 1[0-2]/[1-3][0-9]/[0-9][0-9].
| >> e=-date; numa=1; nume=1.
| >> arg: 8/26/96.
| >> 36: -fn: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 37: -set: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 46: -no_build_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 52: -no_build_co: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| >> DEBUG INFO in current_sb:
| >> Found sb name in environment. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /SANDBOX3.
| >> DEBUG INFO in current_sb:
| >> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> current sandbox: A___isp1020_v32de1
| >> sandbox has base dir: /SANDBOX3
| >> using user's rc file: /usr/users/melvin/.sandboxrc
| >> using sandbox's rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /SANDBOX3.
| >> DEBUG INFO in current_sb:
| >> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
.
| >> DEBUG INFO in current_set:
| >> found default set, Joseph_Melvin_A___isp1020_v32de1, in sb rcfile.
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /SANDBOX3.
| >> DEBUG INFO in current_sb:
| >> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
.
| >> DEBUG INFO in current_set:
| >> matched set, Joseph_Melvin_A___isp1020_v32de1, and setdir, ., in sb rcfile
.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> from the set: Joseph_Melvin_A___isp1020_v32de1
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> check_out_config is 'V32DE1SUPPORTOS_NIGHTLY;MP1OS;V32CSUPPORTOS_NIGHTLY;<
>'
| > build to submit to is: v32de1supportos.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> directory path to build is: /usr/sde/osf1/build.
| >> directory to build source is: /usr/sde/osf1/build/v32de1supportos/src.
| >> set name for build is: V32DE1SUPPORTOS.
| >> use build's rc file: /usr/sde/osf1/build/v32de1supportos/.sandboxrc.
| >> submission cover: /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_client.
| >> submission host: secret.zk3.dec.com.
| >> submission base: /usr/sde/osf1/build/v32de1supportos/logs.
| >> submission owner: devbld.
| >> will ask for defect numbers.
| > Time is: 11:12; date is: 8/29/96.
| > cd'ing to sandbox source directory: /SANDBOX3/A___isp1020_v32de1/src.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> The following files and directories will be used:
| >> 17:07.Tlog
| >> 17:07.Tsnapshot
| >> 17:07.Tdefunct
| >> 17:07.Tundefunct
| >> 17:07.Trevert
| >> 17:07.Thold
| >> /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| >> /SANDBOX3/A___isp1020_v32de1/src/17:07.Joseph_Melvin
| >> /SANDBOX3/A___isp1020_v32de1/src/17:07.bcssteps
| >> : Joseph_Melvin; Date: 8/26/96; Time: 17:07
| > checking for lock on build: /usr/sde/osf1/build/v32de1supportos/src/.BCSlo
ck
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: logsubmit is_submit_locked -debug
| /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
| ODE CLIENT: SERVER Host =secret.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
| ODE CLIENT: POOL Owner=devbld
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs,
| tree_owner is devbld
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec is_submit_locked
| -debug /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 25: !-*: mODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| axe=2; dup=0; mina=0; maxa=0; a=.
| >> e=/usr/sde/osf1/build/v32de1supportos/src/.BCSlock; numa=0; nume=1.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25199
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: logsubmit submit_acl_check -debug submit.acl
| ODE CLIENT: SERVER Host =secret.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
| ODE CLIENT: POOL Owner=devbld
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs,
| tree_owner is devbld
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec submit_acl_check
| -debug submit.acl
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
| >> e=submit.acl; numa=0; nume=1.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25267
| > checking access control list on submit>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0
| Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes] Ye
s
| > Checking environment...
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> org_dir is './kernel/io/cam/qlogic'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_init
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_check_env
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_check_env
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Composing list of legal copyright markers.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> copyright rc variable: (starts on next line)
| >> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Looking for copyright markers in string:
| >> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 1: DEC_COPYRIGHT
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 2: DEC_COPYRIGHT_MIN
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 3: DEC_COPYRIGHT_MAX
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 4: DEC_COPYRIGHT_FSF
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_init
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering setup_for_bcs
| > checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: logsubmit -t2 2 copyfile
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold 17:07.Thold -debug
| ODE CLIENT: SERVER Host =secret.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
| ODE CLIENT: POOL Owner=devbld
| ODE CLIENT: CLIENT will send & receive a data file.
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- SENDING DATA FILE TO THE SERVER ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE CLIENT: Sending 17:07.Thold, permissions 644, with 110 bytes to the serve
r.
| ODE CLIENT: -------DONE SENDING FILE TO SERVER-------
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs,
| tree_owner is devbld
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: Client sending file with permissions 0644, size 110
| ODE_SERVER: Receiving client file
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
| ODE_SERVER: Read 110 from client. Wrote 110 to
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec copyfile
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold -debug
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVE DATA FILE FROM SERVER ----
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
| >> e=/usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold; numa=0; nume=
2.
| >> e=OdeSrvrTmpJoseph_Melvin025266/17:07.Thold: numa=0.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| >> DEBUG INFO in copyfile:
| >> Arg[0] is: /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold.
| >> DEBUG INFO in copyfile:
| >> Arg[1] is: OdeSrvrTmpJoseph_Melvin025266/17:07.Thold.
| >> DEBUG INFO in copyfile:
| >> copy_hold: /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold -->
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
| >> DEBUG INFO in copyfile:
| >> filename is: Thold.
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: SENDING file OdeSrvrTmpJoseph_Melvin025266/17:07.Thold to
| the client.
| ODE_SERVER: SENDING a total of 110 bytes to the client.
| ODE_SERVER: Wrote 110 bytes to the client.
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25266
| ODE CLIENT: Socket read 110 bytes
| ODE CLIENT: Write to file 17:07.Thold 110 bytes
| ODE CLIENT: -------DONE RECEIVING FILE FROM SERVER-------
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0> checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_new_list
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_new_list
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_add_to_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> org_path = /./kernel/io/cam/qlogic file_name =
| ./kernel/io/cam/qlogic/isp1020.c
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> tbuf = ./kernel/io/cam/qlogic = (buf without leading slash)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> buf = ./kernel/io/cam/qlogic/isp1020.c = (tbuf + file_name or just file_na
me)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Adding ./kernel/io/cam/qlogic/isp1020.c to a list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_add_to_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_add_to_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> org_path = /./kernel/io/cam/qlogic file_name =
| ./kernel/io/cam/qlogic/isp1020.h
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> tbuf = ./kernel/io/cam/qlogic = (buf without leading slash)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> buf = ./kernel/io/cam/qlogic/isp1020.h = (tbuf + file_name or just file_na
me)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Adding ./kernel/io/cam/qlogic/isp1020.h to a list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_add_to_list at depth 0.
| > Submitting the following files:
| > ./kernel/io/cam/qlogic/isp1020.c
| > ./kernel/io/cam/qlogic/isp1020.h
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving setup_for_bcs
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering validate_submission
| > Validating submission...
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_read_leader
| ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rlog -h
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 7380
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_read_leader, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_read_leader
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_read_leader
| ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rlog -h
| ./kernel/io/cam/qlogic/isp1020.h
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 17655
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_read_leader, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_read_leader
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> pattern: -config_update, not in entry table.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config_rev is '1.1.39.3'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> pattern: -config_update, not in entry table.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config_rev is '1.1.27.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_lookup_user_rev_list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 0.
| ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V
| -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 2638
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.92.2
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> ver_user, def_str '1.1.92.2', ''
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 0.
| ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/toolsODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND
| ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| /alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V
| -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.h
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 3488
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.61.3
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> ver_user, def_str '1.1.61.3', ''
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_lookup_user_rev_list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_is_branch at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_is_branch at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_lookup_merge_rev_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev_str 'V32DE1SUPPORTOS'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config_str ';V32DE1SUPPORTOS_NIGHTLY;MP1OS;V32CSUPPORTOS_NIGHTLY;<>'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 1.
| ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.
c
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/toolsODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND
| ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| /alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V -rV32DE1SUPPORTOS
| ./kernel/io/cam/qlogic/isp1020.c
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 24227
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.95.1
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Setting ver_merge to '1.1.95.1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 1.
| ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.
h
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS
| ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V
| -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.h
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 29169
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.63.2
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Setting ver_merge to '1.1.63.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_lookup_merge_rev_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_ancestor_list
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_setup_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_setup_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> before. R1 :-p1.1.95.1: R2 :-p1.1.92.2: R3 :-p
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config 'b' is '1.1.39.3'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> comparison yields '-1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (1) is :1.1.39.3:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (2) is :1.1.39.3:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> after. R1 :-p1.1.95.1: R2 :-p1.1.92.2: R3 :1.1.39.3
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev1,2,3: '-p1.1.95.1' '-p1.1.92.2' '-p1.1.39.3'
| > Common ancestor -p1.1.39.3, merge required
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> before. R1 :-p1.1.63.2: R2 :-p1.1.61.3: R3 :-p
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config 'b' is '1.1.27.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> comparison yields '-1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (1) is :1.1.27.2:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (2) is :1.1.27.2:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> after. R1 :-p1.1.63.2: R2 :-p1.1.61.3: R3 :1.1.27.2
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev1,2,3: '-p1.1.63.2' '-p1.1.61.3' '-p1.1.27.2'
| > Common ancestor -p1.1.27.2, merge required
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving validate_submission
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_trackfile
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_trackfile
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: v32de1supportos.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /usr/sde/osf1/build.
| >> DEBUG INFO in current_sb:
| >> Found sandbox rc file in usr rcfile. File is: local.sharedsandbox.
| > Checking files in; Set: 'V32DE1SUPPORTOS'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_check_in_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> mesgfile is '/SANDBOX3/A___isp1020_v32de1/tmp/_LOG_'
| > ./kernel/io/cam/qlogic/isp1020.c
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering check_path at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering check_path
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving check_path at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving check_path
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> begin_atomic
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering copy_file
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> src :./kernel/io/cam/qlogic/isp1020.c:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> dst :/SANDBOX3/A___isp1020_v32de1/tmp/isp1020.c:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving copy_file: rename successful
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_xtract_log at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_logmsg at depth 2.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev is '1.1.92.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In src_ctl_lookup_logmsg mesgfile is '/SANDBOX3/A___isp1020_v32de1/tmp/_LO
G_'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_extract_history at depth 3.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev is 'NULL pointer'
| > Scanning for HISTORY and $Log...$ messages
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering process_log_messages at depth 4.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> leader ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> nrev '0'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving process_log_messages at depth 4.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_extract_history at depth 3.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_logmsg at depth 2.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_xtract_log at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> logmsg is ''
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering okmesg at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving okmesg at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> logmsg is ' Port of changes into V32DE1. Code changes provided by Dick
| Bagley.
| The following audit trail lists the various problems fixed by his
| code changes.
|
| 1996/06/25 14:20:42 Dick_Bagley
| Fix for mailbox command failure in isp_init() on system
| reboots that started occurring with the HW6/BL6 form of
| the driver. Fixes for QARs 46071, 46139, 46703, 46756,
| 46757, 46761 and 46885.
|
| 1996/04/23 13:06:43 Dick_Bagley
| o Backport of PTHW1 fix for an IPL problem in isp_mailboxissue()
/
| isp_mailboxcomplete() that prevented booting under PTHW1.
| o Incorporated flag definitions/CSEC status codes from newer Qlo
gic
| spec's.
| o Some BDR tweaks resulting from recent (post-rev 1.1.48.5) BDR
| testing.
|
| 1996/04/02 13:50:34 Dick_Bagley
| Fixed lockmode 4 violations (QAR 45122), and eliminated a CAM_ER
ROR
| reported during installation for data phase underruns (actually
| resulting from Mode Sense commands as issued by install).
|
| 1996/03/12 15:06:24 Dick_Bagley
| o Fix for QAR 42908 (lock timeout panic when isp_abort mailbox
| command fails), and plugged timing holes that might occur
| if an abort is completed by a 3rd-party SCSI reset.
| o Fixes for QAR's 42761, 43719 and 44474.
| o Included fixes required as part of Fast20 testing with advance
d
| Qlogic 1040A board.
| o Changed a bunch of printf's into CAM_ERROR calls for error
| logging.
|
| 1996/02/07 18:47:04 Dick_Bagley
| Version 3 NVRAM data structure support and Fast20 enablers.
|
| 1996/01/16 15:46:01 Dick_Bagley
| o Fixes for QARs 40361 (H), 40443 (S) and 41465(H).
| All of these QARs are related: they involve locking
| problems that occur during processing of Aborts.
| Several other fixes are also included:
| - Fixed memory leaks on probe failure.
| - Fixed memory leak during abort processing.
| - Fixed an xpt: callback on freed ccb panic
| that occurred during 3rd-party reset processing.
| - Fixed problems that occurred if a 3rd-party
| reset is received during abort processing.
| - Fixed problem that occurs if a mailbox operation
| fails during probe (if isp_reinit() is called before
| the job list and cam data structures are valid).
| [1996/08/07 20:08:43 Joseph_Melvin]
| '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Before calling src_ctl_check_in, ver_merge is '1.1.95.1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_check_in at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_check_in
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering get_ancestor_rev_for_merge at depth 2.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving get_ancestor_rev_for_merge at depth 2.
| ode_client -t2 5 ci -f -sExp -u1.1.95 -m ** Merge Information **
| ** Command used: bsubmit -visual **
| ** Ancestor revision: 1.1.39.3 **
| ** Merge revision: 1.1.95.1 **
| ** End **
| Port of changes into V32DE1. Code changes provided by Dick Bagley.
| The following audit trail lists the various problems fixed by his
| code changes.
|
| 1996/06/25 14:20:42 Dick_Bagley
| Fix for mailbox command failure in isp_init() on system
| reboots that started occurring with the HW6/BL6 form of
| the driver. Fixes for QARs 46071, 46139, 46703, 46756,
| 46757, 46761 and 46885.
|
| 1996/04/23 13:06:43 Dick_Bagley
| o Backport of PTHW1 fix for an IPL problem in isp_mailboxissue()
/
| isp_mailboxcomplete() that prevented booting under PTHW1.
| o Incorporated flag definitions/CSEC status codes from newer Qlo
gic
| spec's.
| o Some BDR tweaks resulting from recent (post-rev 1.1.48.5) BDR
| testing.
|
| 1996/04/02 13:50:34 Dick_Bagley
| Fixed lockmode 4 violations (QAR 45122), and eliminated a CAM_ER
ROR
| reported during installation for data phase underruns (actually
| resulting from Mode Sense commands as issued by install).
|
| 1996/03/12 15:06:24 Dick_Bagley
| o Fix for QAR 42908 (lock timeout panic when isp_abort mailbox
| command fails), and plugged timing holes that might occur
| if an abort is completed by a 3rd-party SCSI reset.
| o Fixes for QAR's 42761, 43719 and 44474.
| o Included fixes required as part of Fast20 testing with advance
d
| Qlogic 1040A board.
| o Changed a bunch of printf's into CAM_ERROR calls for error
| logging.
|
| 1996/02/07 18:47:04 Dick_Bagley
| Version 3 NVRAM data structure support and Fast20 enablers.
|
| 1996/01/16 15:46:01 Dick_Bagley
| o Fixes for QARs 40361 (H), 40443 (S) and 41465(H).
| All of these QARs are related: they involve locking
| problems that occur during processing of Aborts.
| Several other fixes are also included:
| - Fixed memory leaks on probe failure.
| - Fixed memory leak during abort processing.
| - Fixed an xpt: callback on freed ccb panic
| that occurred during 3rd-party reset processing.
| - Fixed problems that occurred if a 3rd-party
| reset is received during abort processing.
| - Fixed problem that occurs if a mailbox operation
| fails during probe (if isp_reinit() is called before
| the job list and cam data structures are valid).
| [1996/08/07 20:08:43 Joseph_Melvin]
| isp1020.c ./kernel/io/cam/qlogic/isp1020.c,v
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_check_in at depth 1.
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process killed by signal 11[ ./kernel/io/cam/qlogic/isp1020.c checked in o
nto
| branch 1.1.95 ]
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_check_in
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> end_atomic
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_check_in_list at depth 0.
|
| Please take appropriate steps and re-submit.
|
| *** RE-SUBMISSION REQUIRED ***
|
| - - Source control information is in an intermediate state.
| - - Re-submit using -resub 17:07 [ -date 8/26/96 ]
|
|
|
| ------- End of Forwarded Message
|
--
-Grant
|
| Date Of Receipt: 3-SEP-1996 17:53:33.09
From: FLUME::"[email protected]" "Joshua M. Friedman Digital UNIX"
To: [email protected]
CC: [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected]
Subj: Re: Hi Josh, could you help out with this one? Thanks a lot.
Joe, do you intend to have all these private branches (9 actually)? At
least two look like they're supposed to be the same but aren't; this
should be independent of the problem you're having, however, unless
you're not where you think you are:
Joseph_Melvin_A___isp1020_v32de1: 1.1.96
Joseph_Melvin_A_isp1020_v32de1: 1.1.78
-josh
-----------
To: [email protected]
Cc: [email protected], [email protected]
Subject: Re: Hi Josh, could you help out with this one? Thanks a lot.
Date: Tue, 03 Sep 96 15:41:41 -0400
From: "Grant Van Dyck" <[email protected]>
Just looked at this in RCS. This file is almost 18MB and Joe has 14 private
branches of it.
Joseph_Melvin: 1.1.95.1
Joseph_Melvin: 1.1.83.1
Joseph_Melvin: 1.1.70.1
Joseph_Melvin: 1.1.69.1
Joseph_Melvin: 1.1.57.1
Joseph_Melvin_A___isp1020_v32de1: 1.1.96
Joseph_Melvin_A_v32fsupportos_nightly: 1.1.85
Joseph_Melvin_A_isp1020_v40: 1.1.83
Joseph_Melvin_A_isp1020_v32f: 1.1.82
Joseph_Melvin_A_isp1020_v32de2: 1.1.81
Joseph_Melvin_A_isp1020_v32de1: 1.1.78
Joseph_Melvin_MGO102180_v32d1: 1.1.70
Joseph_Melvin_MGO102180_v32d2: 1.1.69
Joseph_Melvin_v32c_supp_nightly_MGO102049: 1.1.57
|
| ------- Forwarded Message
|
| Return-Path: [email protected]
| Delivery-Date: Tue, 03 Sep 96 15:27:04 -0400
| Return-Path: [email protected]
| Received: from DECnet-Mail11.flume.zk3.dec.com by flume.zk3.dec.com;
| (5.65v3.2/1.1.8.2/16Jan95-0946AM)
| id AA23625; Tue, 3 Sep 1996 15:26:21 -0400
| Date: Tue, 3 Sep 1996 15:26:20 -0400
| Message-Id: <[email protected]>
| Mime-Version: 1.0
| From: [email protected] (USEG #381-1593 @ZKO3-2/T21)
| To: [email protected]
| Cc: MELVIN
| Subject: Here is the bsubmit trace for what I tried to do. Thanks1 -Joe
| Content-Type: text/plain; charset=US-ASCII
| Content-Transfer-Encoding: 7bit
|
| From: RUSURE::MELVIN "USEG #381-1593 @ZKO3-2/T21" 29-AUG-1996
| 11:22:48.89
| To: WASTED::ODEHELP
| CC: MELVIN
| Subj: Help needed on failure during bsubmit under de1supportos.nightly
|
|
| I am having trouble getting a bsubmit done into the V32de1 support
| pool (nightly). When I originally did the bsubmit, I received the
| error given below. Any idea what I am doing wrong this time (other
| pools, with similar bsubmits have worked fine). Can I delete any
| of the tracking files to basically 'reset' this and just do a fresh
| bsubmit (without the need for -resub)? Thanks in advance.
|
| At the very end of this message is an attempt to do the -resub
| using -verbose -debug -odedebug cvs (at Josh Friedman's suggestion).
|
| - -Joe Melvin
| USEG
|
| =============================================================================
==
| ==== original bsubmit
|
| jmroid> bsubmit -all
| Enter the defect number this submission applies to: v32de1supportos-60-melvin
|
|
| Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes]
|
| *** No user interaction will be required during the merge step. ***
| [ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]
| [ ./kernel/io/cam/qlogic/isp1020.h checked in onto branch 1.1.63 ]
|
| Please take appropriate steps and re-submit.
|
| *** RE-SUBMISSION REQUIRED ***
|
| - - Source control information is in an intermediate state.
| - - Re-submit using -resub 17:07 [ -date 8/26/96 ]
|
|
|
| The above is totally devoid of content to let me know what was going on. The
| files were outdated, even though the submit did not successfully go through.
| They do not appear have been puit into the de1 support pool either. When I
| try to do the -resub as 'suggested', I get the following:
|
|
| jmroid> bsubmit -resub 17:07 -date 8/26/96 -verbose
| Enter the defect number this submission applies to: v32de1supportos-60-melvin
|
| > build to submit to is: v32de1supportos.
| > Time is: 10:04; date is: 8/29/96.
| > cd'ing to sandbox source directory: /SANDBOX3/A___isp1020_v32de1/src.
| > checking for lock on build: /usr/sde/osf1/build/v32de1supportos/src/.BCSlo
ck
| > checking access control list on submit
| Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes] ye
s
| > Checking environment...
| > checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| > checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| > Submitting the following files:
| > ./kernel/io/cam/qlogic/isp1020.c
| > ./kernel/io/cam/qlogic/isp1020.h
| > Validating submission...
| > Common ancestor -p1.1.39.3, merge required
| > Common ancestor -p1.1.27.2, merge required
| > Checking files in; Set: 'V32DE1SUPPORTOS'
| > ./kernel/io/cam/qlogic/isp1020.c
| > Scanning for HISTORY and $Log...$ messages
| [ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]
|
| Please take appropriate steps and re-submit.
|
| *** RE-SUBMISSION REQUIRED ***
|
| - - Source control information is in an intermediate state.
| - - Re-submit using -resub 17:07 [ -date 8/26/96 ]
|
|
|
| =============================================================================
==
| =============================================================================
==
|
|
|
| jmroid> !5
| bsubmit -resub 17:07 -date 8/26/96 -verbose -debug -odedebug csv
| Enter the defect number this submission applies to: v32de1supportos-60-melvin
|
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 1 : -nolog: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -local_co: maxe=1; dup=0; mina=0; maxa=2; a=backing lock.
| >> 3 : -sb: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -resub: maxe=1; dup=0; mina=1; maxa=1; a=[0-9]:[0-5][0-9]
| [12][0-9]:[0-5][0-9].
| >> e=-resub; numa=1; nume=1.
| >> arg: 17:07.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 13: -novisual: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -tag: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 14: -all: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 16: -config: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 17: -auto_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 19: -auto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -l: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> -visual: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> -log: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> -m: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 22: -no_merge: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 25: -noauto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> !-*: maxe=-1; dup=0; mina=0; maxa=0; a=.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 30: -defect: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> e=-defect; numa=1; nume=1.
| >> arg: v32de1supportos-60-melvin.
| >> 32: -date: maxe=1; dup=0; mina=1; maxa=1; a=[1-9]/[1-9]/[0-9][0-9]
| [1-9]/[1-3][0-9]/[0-9][0-9] 1[0-2]/[1-9]/[0-9][0-9]
| 1[0-2]/[1-3][0-9]/[0-9][0-9].
| >> e=-date; numa=1; nume=1.
| >> arg: 8/26/96.
| >> 36: -fn: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 37: -set: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 46: -no_build_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 52: -no_build_co: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| >> DEBUG INFO in current_sb:
| >> Found sb name in environment. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /SANDBOX3.
| >> DEBUG INFO in current_sb:
| >> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> current sandbox: A___isp1020_v32de1
| >> sandbox has base dir: /SANDBOX3
| >> using user's rc file: /usr/users/melvin/.sandboxrc
| >> using sandbox's rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /SANDBOX3.
| >> DEBUG INFO in current_sb:
| >> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
.
| >> DEBUG INFO in current_set:
| >> found default set, Joseph_Melvin_A___isp1020_v32de1, in sb rcfile.
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: A___isp1020_v32de1.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /SANDBOX3.
| >> DEBUG INFO in current_sb:
| >> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
.
| >> DEBUG INFO in current_set:
| >> matched set, Joseph_Melvin_A___isp1020_v32de1, and setdir, ., in sb rcfile
.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> from the set: Joseph_Melvin_A___isp1020_v32de1
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> check_out_config is 'V32DE1SUPPORTOS_NIGHTLY;MP1OS;V32CSUPPORTOS_NIGHTLY;<
>'
| > build to submit to is: v32de1supportos.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> directory path to build is: /usr/sde/osf1/build.
| >> directory to build source is: /usr/sde/osf1/build/v32de1supportos/src.
| >> set name for build is: V32DE1SUPPORTOS.
| >> use build's rc file: /usr/sde/osf1/build/v32de1supportos/.sandboxrc.
| >> submission cover: /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_client.
| >> submission host: secret.zk3.dec.com.
| >> submission base: /usr/sde/osf1/build/v32de1supportos/logs.
| >> submission owner: devbld.
| >> will ask for defect numbers.
| > Time is: 11:12; date is: 8/29/96.
| > cd'ing to sandbox source directory: /SANDBOX3/A___isp1020_v32de1/src.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> The following files and directories will be used:
| >> 17:07.Tlog
| >> 17:07.Tsnapshot
| >> 17:07.Tdefunct
| >> 17:07.Tundefunct
| >> 17:07.Trevert
| >> 17:07.Thold
| >> /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| >> /SANDBOX3/A___isp1020_v32de1/src/17:07.Joseph_Melvin
| >> /SANDBOX3/A___isp1020_v32de1/src/17:07.bcssteps
| >> : Joseph_Melvin; Date: 8/26/96; Time: 17:07
| > checking for lock on build: /usr/sde/osf1/build/v32de1supportos/src/.BCSlo
ck
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: logsubmit is_submit_locked -debug
| /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
| ODE CLIENT: SERVER Host =secret.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
| ODE CLIENT: POOL Owner=devbld
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs,
| tree_owner is devbld
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec is_submit_locked
| -debug /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 25: !-*: mODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| axe=2; dup=0; mina=0; maxa=0; a=.
| >> e=/usr/sde/osf1/build/v32de1supportos/src/.BCSlock; numa=0; nume=1.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25199
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: logsubmit submit_acl_check -debug submit.acl
| ODE CLIENT: SERVER Host =secret.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
| ODE CLIENT: POOL Owner=devbld
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs,
| tree_owner is devbld
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec submit_acl_check
| -debug submit.acl
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
| >> e=submit.acl; numa=0; nume=1.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25267
| > checking access control list on submit>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0
| Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes] Ye
s
| > Checking environment...
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> org_dir is './kernel/io/cam/qlogic'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_init
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_check_env
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_check_env
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Composing list of legal copyright markers.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> copyright rc variable: (starts on next line)
| >> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Looking for copyright markers in string:
| >> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 1: DEC_COPYRIGHT
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 2: DEC_COPYRIGHT_MIN
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 3: DEC_COPYRIGHT_MAX
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entry 4: DEC_COPYRIGHT_FSF
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_init
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering setup_for_bcs
| > checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: logsubmit -t2 2 copyfile
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold 17:07.Thold -debug
| ODE CLIENT: SERVER Host =secret.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
| ODE CLIENT: POOL Owner=devbld
| ODE CLIENT: CLIENT will send & receive a data file.
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- SENDING DATA FILE TO THE SERVER ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE CLIENT: Sending 17:07.Thold, permissions 644, with 110 bytes to the serve
r.
| ODE CLIENT: -------DONE SENDING FILE TO SERVER-------
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs,
| tree_owner is devbld
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: Client sending file with permissions 0644, size 110
| ODE_SERVER: Receiving client file
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
| ODE_SERVER: Read 110 from client. Wrote 110 to
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec copyfile
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold -debug
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVE DATA FILE FROM SERVER ----
| >> DEBUG INFO in ui_init:
| >> Contents of interface table:
| >> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> e=-auto; numa=0; nume=1.
| >> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
| >> e=/usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold; numa=0; nume=
2.
| >> e=OdeSrvrTmpJoseph_Melvin025266/17:07.Thold: numa=0.
| >> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
| >> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
| >> vl=7; ap=8; ip=42.
| >> DEBUG INFO in copyfile:
| >> Arg[0] is: /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold.
| >> DEBUG INFO in copyfile:
| >> Arg[1] is: OdeSrvrTmpJoseph_Melvin025266/17:07.Thold.
| >> DEBUG INFO in copyfile:
| >> copy_hold: /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold -->
| OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
| >> DEBUG INFO in copyfile:
| >> filename is: Thold.
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: SENDING file OdeSrvrTmpJoseph_Melvin025266/17:07.Thold to
| the client.
| ODE_SERVER: SENDING a total of 110 bytes to the client.
| ODE_SERVER: Wrote 110 bytes to the client.
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25266
| ODE CLIENT: Socket read 110 bytes
| ODE CLIENT: Write to file 17:07.Thold 110 bytes
| ODE CLIENT: -------DONE RECEIVING FILE FROM SERVER-------
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0> checking HOLD file: 17:07.Thold
| /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_new_list
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_new_list
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_add_to_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> org_path = /./kernel/io/cam/qlogic file_name =
| ./kernel/io/cam/qlogic/isp1020.c
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> tbuf = ./kernel/io/cam/qlogic = (buf without leading slash)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> buf = ./kernel/io/cam/qlogic/isp1020.c = (tbuf + file_name or just file_na
me)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Adding ./kernel/io/cam/qlogic/isp1020.c to a list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_add_to_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_add_to_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> org_path = /./kernel/io/cam/qlogic file_name =
| ./kernel/io/cam/qlogic/isp1020.h
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> tbuf = ./kernel/io/cam/qlogic = (buf without leading slash)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> buf = ./kernel/io/cam/qlogic/isp1020.h = (tbuf + file_name or just file_na
me)
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Adding ./kernel/io/cam/qlogic/isp1020.h to a list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_add_to_list at depth 0.
| > Submitting the following files:
| > ./kernel/io/cam/qlogic/isp1020.c
| > ./kernel/io/cam/qlogic/isp1020.h
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving setup_for_bcs
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering validate_submission
| > Validating submission...
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_read_leader
| ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rlog -h
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 7380
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_read_leader, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_read_leader
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_read_leader
| ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rlog -h
| ./kernel/io/cam/qlogic/isp1020.h
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 17655
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_read_leader, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_read_leader
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In sci_lookup_leader_list, leader is ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> pattern: -config_update, not in entry table.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config_rev is '1.1.39.3'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> pattern: -config_update, not in entry table.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_config_lookup
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config_rev is '1.1.27.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_lookup_user_rev_list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 0.
| ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V
| -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 2638
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.92.2
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> ver_user, def_str '1.1.92.2', ''
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 0.
| ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1
| ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/toolsODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND
| ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| /alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V
| -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.h
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 3488
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.61.3
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> ver_user, def_str '1.1.61.3', ''
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_lookup_user_rev_list.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_is_branch at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_is_branch at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_lookup_merge_rev_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev_str 'V32DE1SUPPORTOS'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config_str ';V32DE1SUPPORTOS_NIGHTLY;MP1OS;V32CSUPPORTOS_NIGHTLY;<>'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 1.
| ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.
c
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS
| ./kernel/io/cam/qlogic/isp1020.c
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/toolsODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND
| ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| /alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V -rV32DE1SUPPORTOS
| ./kernel/io/cam/qlogic/isp1020.c
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 24227
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.95.1
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Setting ver_merge to '1.1.95.1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering rcsfullstat at depth 1.
| ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.
h
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| ODE CLIENT: ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS
| ./kernel/io/cam/qlogic/isp1020.h
| ODE CLIENT: SERVER Host =buffer.zk3.dec.com
| ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
| ODE CLIENT: POOL Owner=devrcs
| ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
| ODE CLIENT: CLIENT SOCKET ADDRESS = 549
| ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
| ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
| ODE CLIENT: ---- SENDING AUTHORIZATION ----
| ODE CLIENT: No KERBEROS REQUIRED
| ODE CLIENT: ---- AUTHORIZATION OK ----
| ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
| ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
| ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
| ODE_SERVER: principal name is Joseph_Melvin
| ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is dev
rcs
| ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
| ODE_SERVER: ==== CHECKING AUTHORIZATION ====
| ODE_SERVER: DOING CLIENT VERIFICATION.
| ODE_SERVER: ==== AUTHORIZATION OK ====
| ODE_SERVER: ==== CHECKING CONFIGURATION ====
| ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
| ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
| ODE CLIENT: ---- CLIENT EXIT STATUS = 0 IN 4 bytes----
| ODE_SERVER: ==== CONFIGURATION OK ====
| ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
| ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
| ODE_SERVER: SERVER
| TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
| ODE_SERVER: COMMAND:
| /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V
| -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.h
| ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
| ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
| ODE_SERVER: sending exit status to client. 0
| ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 29169
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process exited with 0>> DEBUG INFO in
| /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rcsstat returned revision 1.1.63.2
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving rcsfullstat at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_revision
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Setting ver_merge to '1.1.63.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_lookup_merge_rev_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_ancestor_list
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_setup_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_setup_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> before. R1 :-p1.1.95.1: R2 :-p1.1.92.2: R3 :-p
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config 'b' is '1.1.39.3'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> comparison yields '-1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (1) is :1.1.39.3:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (2) is :1.1.39.3:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> after. R1 :-p1.1.95.1: R2 :-p1.1.92.2: R3 :1.1.39.3
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev1,2,3: '-p1.1.95.1' '-p1.1.92.2' '-p1.1.39.3'
| > Common ancestor -p1.1.39.3, merge required
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> before. R1 :-p1.1.63.2: R2 :-p1.1.61.3: R3 :-p
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> config 'b' is '1.1.27.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> comparison yields '-1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (1) is :1.1.27.2:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving checkancestor routine.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev3 (2) is :1.1.27.2:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_ancestor
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> after. R1 :-p1.1.63.2: R2 :-p1.1.61.3: R3 :1.1.27.2
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev1,2,3: '-p1.1.63.2' '-p1.1.61.3' '-p1.1.27.2'
| > Common ancestor -p1.1.27.2, merge required
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_prep_merge
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving validate_submission
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_trackfile
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_trackfile
| >> DEBUG INFO in current_sb:
| >> sb name is in rc file. Name is: v32de1supportos.
| >> DEBUG INFO in current_sb:
| >> Found base dir in rcfile. Dir is: /usr/sde/osf1/build.
| >> DEBUG INFO in current_sb:
| >> Found sandbox rc file in usr rcfile. File is: local.sharedsandbox.
| > Checking files in; Set: 'V32DE1SUPPORTOS'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_check_in_list at depth 0.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> mesgfile is '/SANDBOX3/A___isp1020_v32de1/tmp/_LOG_'
| > ./kernel/io/cam/qlogic/isp1020.c
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering check_path at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering check_path
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving check_path at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving check_path
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> begin_atomic
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering copy_file
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> src :./kernel/io/cam/qlogic/isp1020.c:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> dst :/SANDBOX3/A___isp1020_v32de1/tmp/isp1020.c:
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving copy_file: rename successful
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering sci_xtract_log at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_lookup_logmsg at depth 2.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev is '1.1.92.2'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> In src_ctl_lookup_logmsg mesgfile is '/SANDBOX3/A___isp1020_v32de1/tmp/_LO
G_'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_extract_history at depth 3.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> rev is 'NULL pointer'
| > Scanning for HISTORY and $Log...$ messages
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering process_log_messages at depth 4.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> leader ' * '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> nrev '0'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving process_log_messages at depth 4.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_extract_history at depth 3.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_lookup_logmsg at depth 2.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_xtract_log at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> logmsg is ''
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering okmesg at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving okmesg at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> logmsg is ' Port of changes into V32DE1. Code changes provided by Dick
| Bagley.
| The following audit trail lists the various problems fixed by his
| code changes.
|
| 1996/06/25 14:20:42 Dick_Bagley
| Fix for mailbox command failure in isp_init() on system
| reboots that started occurring with the HW6/BL6 form of
| the driver. Fixes for QARs 46071, 46139, 46703, 46756,
| 46757, 46761 and 46885.
|
| 1996/04/23 13:06:43 Dick_Bagley
| o Backport of PTHW1 fix for an IPL problem in isp_mailboxissue()
/
| isp_mailboxcomplete() that prevented booting under PTHW1.
| o Incorporated flag definitions/CSEC status codes from newer Qlo
gic
| spec's.
| o Some BDR tweaks resulting from recent (post-rev 1.1.48.5) BDR
| testing.
|
| 1996/04/02 13:50:34 Dick_Bagley
| Fixed lockmode 4 violations (QAR 45122), and eliminated a CAM_ER
ROR
| reported during installation for data phase underruns (actually
| resulting from Mode Sense commands as issued by install).
|
| 1996/03/12 15:06:24 Dick_Bagley
| o Fix for QAR 42908 (lock timeout panic when isp_abort mailbox
| command fails), and plugged timing holes that might occur
| if an abort is completed by a 3rd-party SCSI reset.
| o Fixes for QAR's 42761, 43719 and 44474.
| o Included fixes required as part of Fast20 testing with advance
d
| Qlogic 1040A board.
| o Changed a bunch of printf's into CAM_ERROR calls for error
| logging.
|
| 1996/02/07 18:47:04 Dick_Bagley
| Version 3 NVRAM data structure support and Fast20 enablers.
|
| 1996/01/16 15:46:01 Dick_Bagley
| o Fixes for QARs 40361 (H), 40443 (S) and 41465(H).
| All of these QARs are related: they involve locking
| problems that occur during processing of Aborts.
| Several other fixes are also included:
| - Fixed memory leaks on probe failure.
| - Fixed memory leak during abort processing.
| - Fixed an xpt: callback on freed ccb panic
| that occurred during 3rd-party reset processing.
| - Fixed problems that occurred if a 3rd-party
| reset is received during abort processing.
| - Fixed problem that occurs if a mailbox operation
| fails during probe (if isp_reinit() is called before
| the job list and cam data structures are valid).
| [1996/08/07 20:08:43 Joseph_Melvin]
| '
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Before calling src_ctl_check_in, ver_merge is '1.1.95.1'
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_check_in at depth 1.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering src_ctl_check_in
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Entering get_ancestor_rev_for_merge at depth 2.
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving get_ancestor_rev_for_merge at depth 2.
| ode_client -t2 5 ci -f -sExp -u1.1.95 -m ** Merge Information **
| ** Command used: bsubmit -visual **
| ** Ancestor revision: 1.1.39.3 **
| ** Merge revision: 1.1.95.1 **
| ** End **
| Port of changes into V32DE1. Code changes provided by Dick Bagley.
| The following audit trail lists the various problems fixed by his
| code changes.
|
| 1996/06/25 14:20:42 Dick_Bagley
| Fix for mailbox command failure in isp_init() on system
| reboots that started occurring with the HW6/BL6 form of
| the driver. Fixes for QARs 46071, 46139, 46703, 46756,
| 46757, 46761 and 46885.
|
| 1996/04/23 13:06:43 Dick_Bagley
| o Backport of PTHW1 fix for an IPL problem in isp_mailboxissue()
/
| isp_mailboxcomplete() that prevented booting under PTHW1.
| o Incorporated flag definitions/CSEC status codes from newer Qlo
gic
| spec's.
| o Some BDR tweaks resulting from recent (post-rev 1.1.48.5) BDR
| testing.
|
| 1996/04/02 13:50:34 Dick_Bagley
| Fixed lockmode 4 violations (QAR 45122), and eliminated a CAM_ER
ROR
| reported during installation for data phase underruns (actually
| resulting from Mode Sense commands as issued by install).
|
| 1996/03/12 15:06:24 Dick_Bagley
| o Fix for QAR 42908 (lock timeout panic when isp_abort mailbox
| command fails), and plugged timing holes that might occur
| if an abort is completed by a 3rd-party SCSI reset.
| o Fixes for QAR's 42761, 43719 and 44474.
| o Included fixes required as part of Fast20 testing with advance
d
| Qlogic 1040A board.
| o Changed a bunch of printf's into CAM_ERROR calls for error
| logging.
|
| 1996/02/07 18:47:04 Dick_Bagley
| Version 3 NVRAM data structure support and Fast20 enablers.
|
| 1996/01/16 15:46:01 Dick_Bagley
| o Fixes for QARs 40361 (H), 40443 (S) and 41465(H).
| All of these QARs are related: they involve locking
| problems that occur during processing of Aborts.
| Several other fixes are also included:
| - Fixed memory leaks on probe failure.
| - Fixed memory leak during abort processing.
| - Fixed an xpt: callback on freed ccb panic
| that occurred during 3rd-party reset processing.
| - Fixed problems that occurred if a 3rd-party
| reset is received during abort processing.
| - Fixed problem that occurs if a mailbox operation
| fails during probe (if isp_reinit() is called before
| the job list and cam data structures are valid).
| [1996/08/07 20:08:43 Joseph_Melvin]
| isp1020.c ./kernel/io/cam/qlogic/isp1020.c,v
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_check_in at depth 1.
| ODE CLIENT:
|
| ********** ODE_CLIENT START **********
| ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> process killed by signal 11[ ./kernel/io/cam/qlogic/isp1020.c checked in o
nto
| branch 1.1.95 ]
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving src_ctl_check_in
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> end_atomic
| >> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
| >> Leaving sci_check_in_list at depth 0.
|
| Please take appropriate steps and re-submit.
|
| *** RE-SUBMISSION REQUIRED ***
|
| - - Source control information is in an intermediate state.
| - - Re-submit using -resub 17:07 [ -date 8/26/96 ]
|
|
|
| ------- End of Forwarded Message
|
--
-Grant
|