| Date Of Receipt: 31-MAY-1995 09:20:53.58
From: SMURF::QUARRY::"[email protected]" "31-May-1995 0919"
To: [email protected]
CC: [email protected]
Subj: Re: would someone please look at this?
> Farrell, can you run this again with...
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 1 : -nolog: maxe=1; dup=0; mina=0; maxa=0; a=.
>> -local_co: maxe=1; dup=0; mina=0; maxa=2; a=backing lock.
>> 3 : -sb: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> -resub: maxe=1; dup=0; mina=1; maxa=1; a=[0-9]:[0-5][0-9] [12][0-9]:[0-5][0-9].
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> e=-auto; numa=0; nume=1.
>> 13: -tag: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 14: -all: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 16: -config: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 17: -auto_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 19: -auto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
>> e=-auto_out; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> -log: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> -m: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 22: -no_merge: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 25: -noauto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
>> !-*: maxe=-1; dup=0; mina=0; maxa=0; a=.
>> e=if_otto.c; numa=0; nume=1.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 30: -defect: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 32: -date: maxe=1; dup=0; mina=1; maxa=1; a=[1-9]/[1-9]/[0-9][0-9] [1-9]/[1-3][0-9]/[0-9][0-9] 1[0-2]/[1-9]/[0-9][0-9] 1[0-2]/[1-3][0-9]/[0-9][0-9].
>> 36: -fn: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> e=-fn; numa=1; nume=1.
>> arg: Farrell_Woods.
>> 37: -set: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 46: -no_build_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 52: -no_build_co: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
>> DEBUG INFO in current_sb:
>> Found default sb name in rc file. Name is: newatm.
>> DEBUG INFO in current_sb:
>> sb name is in rc file. Name is: newatm.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /x3/sandboxes.
>> DEBUG INFO in current_sb:
>> Using default sandbox rc file: /x3/sandboxes/newatm/rc_files/local.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> current sandbox: newatm
>> sandbox has base dir: /x3/sandboxes
>> using user's rc file: /usr/users/ftw/.sandboxrc
>> using sandbox's rc file: /x3/sandboxes/newatm/rc_files/local
>> DEBUG INFO in current_sb:
>> sb name is in rc file. Name is: newatm.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /x3/sandboxes.
>> DEBUG INFO in current_sb:
>> Using default sandbox rc file: /x3/sandboxes/newatm/rc_files/local.
>> DEBUG INFO in current_set:
>> found default set, Farrell_Woods_newatm, in sb rcfile.
>> DEBUG INFO in current_sb:
>> sb name is in rc file. Name is: newatm.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /x3/sandboxes.
>> DEBUG INFO in current_sb:
>> Using default sandbox rc file: /x3/sandboxes/newatm/rc_files/local.
>> DEBUG INFO in current_set:
>> matched set, Farrell_Woods_newatm, and setdir, ., in sb rcfile.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> from the set: Farrell_Woods_newatm
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> check_out_config is 'PTATMPROJ;PTOS_NIGHTLY0;PTOS;PTLITEOS_BL4;HW4OS_BL3;HW4OS;V32SUPPORTOS_KITBLD;V32SUPPORTOS;GOLDMINOS_BL5;HW3OS_BL7;V30MAINTOS_BL1;GOLDOS_BL12;GOLDOS_ALT;AGOSMINOR_BL9;AGOSMAINT_BL6;alpha_bl012;<93/01/24,16:21:32'
> build to submit to is: ptatm.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> directory path to build is: /usr/projects/netode2/atm/sandbox.
>> directory to build source is: /usr/projects/netode2/atm/sandbox/ptatm/src.
>> set name for build is: PTATMPROJ.
>> use build's rc file: /usr/projects/netode2/atm/sandbox/ptatm/.sandboxrc.
>> submission cover: /usr/sde/ode2.0/tools/alpha_OSF1/lib/subauth.
>> submission host: dogfish.zk3.dec.com.
>> submission base: /usr/projects/netode2/atm/sandbox/ptatm/logs.
>> submission owner: atmproj.
>> will not ask for defect numbers.
> Time is: 9:11; date is: 5/31/95.
> cd'ing to sandbox source directory: /x3/sandboxes/newatm/src.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> The following files and directories will be used:
>> 9:11.Tlog
>> 9:11.Tsnapshot
>> 9:11.Tdefunct
>> 9:11.Thold
>> /usr/projects/netode2/atm/sandbox/ptatm/logs/bsubmit.hold
>> /x3/sandboxes/newatm/src/9:11.Farrell_Woods
>> /x3/sandboxes/newatm/src/9:11.bcssteps
>> : Farrell_Woods; Date: 5/31/95; Time: 9:11
801925889.292208= kxct entered with bcsbase == /usr/projects/netode2/atm/sandbox/ptatm/logs
801925889.293184= kxct using BCS port number == 548
801925889.293184= host lookup
801925889.300992= hostname dogfish.zk3.dec.com
801925889.300992= socket
801925889.301968= connect
801925889.303920= getsockname
801925889.303920= write debug
801925889.304896= socket control
801925889.304896= bind control
801925889.304896= getsockname control
801925889.305872= listen control
801925889.305872= write control port
801925889.305872= read control port
801925889.385904= accept control
801925889.386880= fork
801925889.389808= start wait for signal socket 5
801925889.419740: reading data port
801925889.422992= open for read of /x3/sandboxes/newatm/tmp/.logsubmit.Farrell_Woods failed: No such file or directory
801925889.447082: data port 1264
801925889.447082: sending data port 4446
801925889.450988: connected to dataport
801925889.454894: checking kerberos authentication
801925889.626758: authentication ok
801925889.630664: version ok
801925889.638476: local name Farrell_Woods
801925889.638476: principal Farrell_Woods.@ZONE
801925889.638476: reading arglist
auth is ok
801925889.814246: arglist count 5
801925890.9531: arglist length 130
801925890.9531: tempslot 0
801925890.9531: checksum 2fd6
801925890.21249: arglist teminated ok
801925890.21249: arglist count/length ok
801925890.21249: arglist checksum ok
801925890.21249: arglist ok
801925890.21249: checking config
801925890.21249: tree_base is /usr/projects/netode2/atm/sandbox/ptatm/logs, tree_owner is atmproj
801925890.25155: cmd is is_submit_locked
801925890.25155: config file /usr/projects/netode2/atm/sandbox/ptatm/logs/kxct.conf
801925890.40779: config mode ok
801925890.52497: config ownership ok
801925890.60309: setuid/chdir ok
801925890.83745: command /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit acl no_acl temp ./tlogdir
801925890.83745: read userid 21539
801925890.173583: going to do a chmod on the file
801925890.388477: secretlen 32
801925890.392383: command started
801925890.392383: principal_buf= PRINCIPAL=Farrell_Woods.@ZONE
801925890.392383: userbuf is USER=Farrell_Woods
801925890.396289: cmdbuf is /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit
801925890.379998= saving authorization with length = 32
801925890.403422= writing authorization to /x3/sandboxes/newatm/tmp/.0.22839.logsubmit.Farrell_Woods
801925890.405374= temporary authorization cache written
801925890.453198= authorization saved
801925890.454174= start wait for data socket 3 and stdin
801925890.492238= reading data socket
801925890.492238= end wait for data socket 3 and stdin
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> e=-auto; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
>> e=/usr/projects/netode2/atm/sandbox/ptatm/src/.BCSlock; numa=0; nume=1.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
801925890.517375: command finished status 0
801925890.521281: sending status 0
801925890.521281: parent process = 22729 closed socket and exiting
801925890.498094= wait for child exit
801925890.499070= kxct exited
> checking for lock on build: /usr/projects/netode2/atm/sandbox/ptatm/src/.BCSlock
801925890.516638= kxct entered with bcsbase == /usr/projects/netode2/atm/sandbox/ptatm/logs
801925890.518590= kxct using BCS port number == 548
801925890.518590= host lookup
801925890.526398= hostname dogfish.zk3.dec.com
801925890.526398= socket
801925890.527374= connect
801925890.529326= getsockname
801925890.529326= write debug
801925890.530302= socket control
801925890.530302= bind control
801925890.530302= getsockname control
801925890.531278= listen control
801925890.531278= write control port
801925890.531278= read control port
801925890.580078= accept control
801925890.582030= fork
801925890.584958= start wait for signal socket 5
801925890.615025: reading data port
801925890.621070= reading authorization from /x3/sandboxes/newatm/tmp/.logsubmit.Farrell_Woods
801925890.623022= cached authorization has length = 32
801925890.623998= cached authorization recovered
801925890.642367: data port 1267
801925890.646273: sending data port 4448
801925890.650179: connected to dataport
801925890.654085: reading arglist
801925890.864670= start wait for data socket 3 and stdin
801925890.806419: arglist count 5
801925890.806419: arglist length 88
801925890.806419: tempslot 0
801925890.810325: checksum 206d
801925890.822043: arglist teminated ok
801925890.822043: arglist count/length ok
801925890.822043: arglist checksum ok
801925890.822043: arglist ok
801925890.822043: checking config
801925890.825949: tree_base is /usr/projects/netode2/atm/sandbox/ptatm/logs, tree_owner is atmproj
801925890.825949: cmd is submit_acl_check
801925890.825949: config file /usr/projects/netode2/atm/sandbox/ptatm/logs/kxct.conf
801925890.825949: config mode ok
801925890.857197: config ownership ok
801925890.861103: setuid/chdir ok
801925890.868915: command /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit acl no_acl temp ./tlogdir
801925890.872821: read userid 21539
801925890.876727: read secretlen 32
801925890.876727: checking kxct authentication
801925890.876727: got secret
801925890.876727: about to do the fopen()
801925890.884539: return from fopen()
801925890.888445: return from fgetc()
801925890.888445: return from fread()
801925890.892351: local name Farrell_Woods
801925890.892351: principal Farrell_Woods.@ZONE
801925890.892351: command started
801925890.892351: principal_buf= PRINCIPAL=Farrell_Woods.@ZONE
801925890.896257: userbuf is USER=Farrell_Woods
801925890.896257: cmdbuf is /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> e=-auto; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
>> e=submit.acl; numa=0; nume=1.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
801925890.991550= reading data socket
801925890.991550= end wait for data socket 3 and stdin
801925891.17343: command finished status 0
801925891.21249: sending status 0
801925891.25155: parent process = 22732 closed socket and exiting
801925890.999358= wait for child exit
801925891.8142= kxct exited
> checking access control list on submit> Checking environment...
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> org_dir is './kernel/io/atm/drivers/otto'
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_init
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_check_env
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_check_env
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Composing list of legal copyright markers.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> copyright rc variable: (starts on next line)
>> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Looking for copyright markers in string:
>> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 1: DEC_COPYRIGHT
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 2: DEC_COPYRIGHT_MIN
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 3: DEC_COPYRIGHT_MAX
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 4: DEC_COPYRIGHT_FSF
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_init
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering setup_for_bcs
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering make_filelist
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_new_list
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_new_list
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_add_to_list at depth 0.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> org_path = /./kernel/io/atm/drivers/otto file_name = if_otto.c
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> tbuf = ./kernel/io/atm/drivers/otto = (buf without leading slash)
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> buf = /./kernel/io/atm/drivers/otto/if_otto.c = (tbuf + file_name or just file_name)
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Adding if_otto.c to a list.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_add_to_list at depth 0.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> entry number: 2, greater than number of entries: 1.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving make_filelist
> Submitting the following files:
> ./kernel/io/atm/drivers/otto/if_otto.c
801925891.50110= kxct entered with bcsbase == /usr/projects/netode2/atm/sandbox/ptatm/logs
801925891.51086= kxct using BCS port number == 548
801925891.52062= host lookup
801925891.59870= hostname dogfish.zk3.dec.com
801925891.59870= socket
801925891.60846= connect
801925891.62798= getsockname
801925891.63774= write debug
801925891.63774= socket control
801925891.63774= bind control
801925891.64750= getsockname control
801925891.64750= listen control
801925891.64750= write control port
801925891.65726= read control port
801925891.178942= accept control
801925891.179918= fork
801925891.182846= start wait for signal socket 7
801925891.212707: reading data port
801925891.223838= reading authorization from /x3/sandboxes/newatm/tmp/.logsubmit.Farrell_Woods
801925891.225790= cached authorization has length = 32
801925891.225790= cached authorization recovered
801925891.247861: data port 1270
801925891.247861: sending data port 4450
801925891.251767: connected to dataport
801925891.255673: reading arglist
801925891.464910= start wait for data socket 5 and stdin
801925891.408007: arglist count 4
801925891.408007: arglist length 69
801925891.408007: tempslot 0
801925891.408007: checksum 194b
801925891.423631: arglist teminated ok
801925891.423631: arglist count/length ok
801925891.423631: arglist checksum ok
801925891.423631: arglist ok
801925891.427537: checking config
801925891.427537: tree_base is /usr/projects/netode2/atm/sandbox/ptatm/logs, tree_owner is atmproj
801925891.427537: cmd is lockhold
801925891.427537: config file /usr/projects/netode2/atm/sandbox/ptatm/logs/kxct.conf
801925891.431443: config mode ok
801925891.458785: config ownership ok
801925891.462691: setuid/chdir ok
801925891.474409: command /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit acl no_acl temp ./tlogdir
801925891.474409: read userid 21539
801925891.474409: read secretlen 32
801925891.478315: checking kxct authentication
801925891.478315: got secret
801925891.478315: about to do the fopen()
801925891.490033: return from fopen()
801925891.490033: return from fgetc()
801925891.490033: return from fread()
801925891.490033: local name Farrell_Woods
801925891.493939: principal Farrell_Woods.@ZONE
801925891.493939: command started
801925891.493939: principal_buf= PRINCIPAL=Farrell_Woods.@ZONE
801925891.493939: userbuf is USER=Farrell_Woods
801925891.497845: cmdbuf is /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> e=-auto; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
801925891.681582= reading data socket
801925891.682558= end wait for data socket 5 and stdin
801925891.708769: command finished status 0
801925891.708769: sending status 0
801925891.716581: parent process = 22735 closed socket and exiting
801925891.690366= wait for child exit
801925891.691342= kxct exited
> have lock on hold file.
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> begin_atomic
>> DEBUG INFO in /usr/sde/tools/alpha_osf1/bin/ode/bsubmit:
>> checking whether any files are already held
801925891.709886= kxct entered with bcsbase == /usr/projects/netode2/atm/sandbox/ptatm/logs
801925891.710862= kxct using BCS port number == 548
801925891.711838= host lookup
801925891.719646= hostname dogfish.zk3.dec.com
801925891.720622= socket
801925891.720622= connect
801925891.723550= getsockname
801925891.723550= write debug
801925891.723550= socket control
801925891.724526= bind control
801925891.724526= getsockname control
801925891.725502= listen control
801925891.725502= write control port
801925891.725502= read control port
801925891.776830= accept control
801925891.777806= fork
801925891.779758= start wait for signal socket 7
801925891.810325: reading data port
801925891.823678= reading authorization from /x3/sandboxes/newatm/tmp/.logsubmit.Farrell_Woods
801925891.824654= cached authorization has length = 32
801925891.825630= cached authorization recovered
801925891.845479: data port 1273
801925891.845479: sending data port 4452
801925891.849385: connected to dataport
801925891.853291: reading arglist
801925892.77438= start wait for data socket 5 and stdin
801925892.1719: arglist count 6
801925892.1719: arglist length 138
801925892.1719: tempslot 2
801925892.5625: tempmode 3
801925892.9531: checksum 3218
801925892.21249: arglist teminated ok
801925892.21249: arglist count/length ok
801925892.21249: arglist checksum ok
801925892.21249: arglist ok
801925892.21249: checking config
801925892.21249: tree_base is /usr/projects/netode2/atm/sandbox/ptatm/logs, tree_owner is atmproj
801925892.21249: cmd is copyfile
801925892.25155: config file /usr/projects/netode2/atm/sandbox/ptatm/logs/kxct.conf
801925892.32967: config mode ok
801925892.60309: config ownership ok
801925892.72027: setuid/chdir ok
801925892.83745: command /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit acl no_acl temp ./tlogdir
801925892.83745: read userid 21539
801925892.83745: read secretlen 32
801925892.87651: checking kxct authentication
801925892.87651: got secret
801925892.87651: about to do the fopen()
801925892.95463: return from fopen()
801925892.103275: return from fgetc()
801925892.103275: return from fread()
801925892.103275: local name Farrell_Woods
801925892.107181: principal Farrell_Woods.@ZONE
801925892.107181: receiving data
801925892.107181: exists 0
801925892.107181: perm 0600, count 0
kxct: opentemp failed: File exists
801925892.95006= wait for child exit
801925892.104766= reading data socket
801925892.105742= end wait for data socket 5 and stdin
client: receiving data
client read failed2: Error 0
didn't receive temporary file
801925892.107694= kxct exited
801925892.124286= kxct entered with bcsbase == /usr/projects/netode2/atm/sandbox/ptatm/logs
801925892.125262= kxct using BCS port number == 548
801925892.125262= host lookup
801925892.134046= hostname dogfish.zk3.dec.com
801925892.134046= socket
801925892.135022= connect
801925892.136974= getsockname
801925892.136974= write debug
801925892.137950= socket control
801925892.137950= bind control
801925892.138926= getsockname control
801925892.138926= listen control
801925892.138926= write control port
801925892.139902= read control port
801925892.175038= accept control
801925892.182846= fork
801925892.184798= start wait for signal socket 7
801925892.212707: reading data port
801925892.222862= reading authorization from /x3/sandboxes/newatm/tmp/.logsubmit.Farrell_Woods
801925892.223838= cached authorization has length = 32
801925892.224814= cached authorization recovered
801925892.243955: data port 1276
801925892.247861: sending data port 4454
801925892.247861: connected to dataport
801925892.251767: reading arglist
801925892.477598= start wait for data socket 5 and stdin
801925892.423631: arglist count 3
801925892.423631: arglist length 64
801925892.423631: tempslot 0
801925892.423631: checksum 17fa
801925892.435349: arglist teminated ok
801925892.439255: arglist count/length ok
801925892.439255: arglist checksum ok
801925892.439255: arglist ok
801925892.439255: checking config
801925892.439255: tree_base is /usr/projects/netode2/atm/sandbox/ptatm/logs, tree_owner is atmproj
801925892.439255: cmd is unlockhold
801925892.443161: config file /usr/projects/netode2/atm/sandbox/ptatm/logs/kxct.conf
801925892.447067: config mode ok
801925892.478315: config ownership ok
801925892.486127: setuid/chdir ok
801925892.490033: command /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit acl no_acl temp ./tlogdir
801925892.493939: read userid 21539
801925892.493939: read secretlen 32
801925892.493939: checking kxct authentication
801925892.493939: got secret
801925892.493939: about to do the fopen()
801925892.501751: return from fopen()
801925892.501751: return from fgetc()
801925892.501751: return from fread()
801925892.505657: local name Farrell_Woods
801925892.505657: principal Farrell_Woods.@ZONE
801925892.505657: command started
801925892.505657: principal_buf= PRINCIPAL=Farrell_Woods.@ZONE
801925892.509563: userbuf is USER=Farrell_Woods
801925892.509563: cmdbuf is /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit
801925892.632782= reading data socket
801925892.632782= end wait for data socket 5 and stdin
801925892.657991: command finished status 0
801925892.661897: sending status 0
801925892.661897: parent process = 22740 closed socket and exiting
801925892.641566= wait for child exit
801925892.642542= kxct exited
> checking HOLD file: 9:11.Thold /usr/projects/netode2/atm/sandbox/ptatm/logs/bsubmit.hold
> released lock on hold file.
- No work has been done for this submission.
- No files have been changed in any way.
- The files in this submission are not held.
- The use of the -resub option is not required and will not be recognized.
> check you can read the kxct.conf files as yourself.
It appears I can:
1.278 marvin:ftw> pd /usr/projects/netode2/atm/sandbox/ptatm/logs
/usr/projects/netode2/atm/sandbox/ptatm/logs /x3/sandboxes/newatm/tmp
1.279 marvin:ftw> ls
DEFUNCT Tsnapshot bsubmit.log lock_logs/ tlogdir/
SNAPSHOT bsubmit.hold kxct.conf submit.acl
1.280 marvin:ftw> ls -l
total 40
-rw-r--r-- 1 50 staff 0 Apr 27 20:07 DEFUNCT
-rw-r--r-- 1 50 staff 1556 May 25 18:38 SNAPSHOT
-rw-r--r-- 1 50 staff 160 May 26 17:39 Tsnapshot
-rw-r--r-- 1 50 staff 0 May 26 17:39 bsubmit.hold
-rw-r--r-- 1 50 staff 18768 May 25 18:39 bsubmit.log
-r--r--r-- 1 50 staff 1009 Apr 27 20:07 kxct.conf
drw------- 2 50 staff 8192 May 26 17:39 lock_logs/
-rw-r--r-- 1 50 staff 154 Apr 27 20:08 submit.acl
drwx------ 2 50 staff 8192 May 26 17:39 tlogdir/
1.281 marvin:ftw> more kxct.conf
command lockhold /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command unlockhold /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command locklog /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command unlocklog /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command copylog /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command admincopy /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command appendhold /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command updatelogs /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command holdcleanup /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command submit_acl_check /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command is_submit_locked /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
command copyfile /usr/sde/ode2.0/tools/mips_ULTRIX/lib/logsubmit no_acl ./tlogdir
1.282 marvin:ftw> pwd
/usr/projects/netode2/atm/sandbox/ptatm/logs
-- Farrell
|