Conference smurf::buildhelp

1147.0. "(from Tina) FWD: kerberos questions and request" by AOSG::FILTER (Automatic Posting Software - mail to flume::puck) Tue Dec 13 1994 18:16

Date Of Receipt: 	 6-DEC-1994 21:19:13.88
From: 	ALPHA::jmf "Joshua M. Friedman OSF/UNIX SDE  06-Dec-1994 2113"
To: 	[email protected]
CC: 	odehelp@DEC:.zko.alpha, anderson@dec:.zso.decwet
Subj: 	(from Tina) FWD: kerberos questions and request

------- Forwarded Message

Return-Path: [email protected] 
Delivery-Date: Tue, 06 Dec 94 19:13:05 -0500
Return-Path: [email protected]
Received: from DECnet-Mail11.flambe.zk3.dec.com by flambe.zk3.dec.com; (5.65/1.1.8.2/30Mar94-0502PM)
	id AA11707; Tue, 6 Dec 1994 19:12:01 -0500
Date: Tue, 6 Dec 1994 19:12:00 -0500
Message-Id: <[email protected]>
From: [email protected] (Tina Anderson  06-Dec-1994 1613 -0700)
To: [email protected]
Subject: could you send to sane, thanks


- ----------------
The text of your failed mail message follows:

From:	OLEUM::"[email protected]"    6-DEC-1994 15:21:38.15
To:	flambe::odehelp, flambe::admin
CC:	bbi::sane
Subj:	FWD: kerberos questions and request

Nitin,

The message is saying is could not find the /.k file.
Rich Larsen created one for you.  You need  to double check you
have it.  

kpropd runs to get a new database  (doesn't need the /.k file)
kerberos uses the databases for kinit (does need the /.k file).

I suspect that kpropd is running fine and you have a database.
Do you have a /var/dss/kerberos/dbase/dbase?  I suspect that
kerberos is not running.  Can you do a kinit to your local slave?

Since you are a slave, you should have your node first in the krb.conf,
otherwise there isn't any point for zk3 to push you a database.

To verify all is working, look at /var/dss/kerberos/log/kerberos.log and
/var/dss/kerberos/log/kpropd.log. 

Tina  
*************************************************************


Josh,

	I have another kerberos problem. This one is unresolved for quite a long 
time (since I was in New Jersey).

	Following is the error message I get when system reboots (or when I run 
/sbin/init.d/Kerberos start).

# ./Kerberos start
Starting kpropd
ERROR: No key file.  With no key, the Kerberos daemon
       will fail.  After the first successful push of
       a database to you, you need to do the following:
 1\)  create a Kerberos key:
        /var/dss/kerberos/bin/kstash
 2\)  rerun this script to start Kerberos:
        kerberos start
Starting kerberos
Kerberos server starting
        Sleep forever on error
        Log file is /var/dss/kerberos/log/kerberos.log


	This indicates that kerberos server is not pushing database to me.

	I had a /etc/krb.conf file as below :
ZONE
ZONE    odie.unx.dec.com
ZONE    rust.zso.dec.com
ZONE    lastin.zk3.dec.com
ZONE    merge.zk3.dec.com
ZONE    merge.zk3.dec.com       admin   dummy


	which I changed to this one following a mail (15-Sep) to that effect.

ZONE
ZONE flume.zk3.dec.com
ZONE alpha.zk3.dec.com
ZONE wasted.zk3.dec.com
ZONE flambe.zk3.dec.com
ZONE yield.zk3.dec.com  admin   dummy


	Is it correct ???

	Also, I need to create some principal names for my team members here in 
India. Is it possible for me to do 
it or do I have to request someone in ZK3 for that ??? (If so, whom)..

	Please reply ASAP.

	Thanks and regards.

- - ------------------------------------------------------
P. B. (Nitin) Sane         MailStop -              BBI
Digital (India)            Voice    -    91-22-8370333
SEEPZ, Bombay.             Fax      -    91-22-8370011
India                      E-Mail   - [email protected]
                                          bbiv02::sane
- - ------------------------------------------------------


- ------- End of Forwarded Message



		-Grant

 ______________________________________________________________________

 Grant Van Dyck 		enet:    [email protected]	
 MS: ZKO3-3/W20			decnet:  flambe::vandyck
 USG Release Engineering		 (603) 881-2932
 110 Spitbrook Road 			 (DTN) 381-2932
 Nashua, NH  






------- End of Forwarded Message