Conference smurf::buildhelp

506.0. "ode help and ris help" by SMURF::FILTER (Automatic Posting Software - mail to flume::puck) Thu Jan 13 1994 10:34

Date Of Receipt: 	11-JAN-1994 11:42:42.75
From: 	QUARRY::myrdal "Gregory Myrdal USG  11-Jan-1994 1142"
To: 	talman@DEC:.zko.quarry, odehelp@DEC:.zko.quarry
CC: 	bound@DEC:.zko.quarry
Subj: 	ode help and ris help

Mike,

Can you help Jim with Ris.  

Can the ODE folks help him with his ODE setup.

-- Greg

------- Forwarded Message

Return-Path: bound 
Delivery-Date: Tue, 11 Jan 94 11:14:34 -0500
Return-Path: bound
Received: by quarry.zk3.dec.com; id AA07915; Tue, 11 Jan 1994 11:14:33 -0500
Received: by xirtlu.zk3.dec.com; id AA04213; Tue, 11 Jan 1994 11:14:32 -0500
Message-Id: <[email protected]>
To: [email protected]
Cc: [email protected], [email protected], [email protected],
        [email protected]
Subject: PATH MTU Development - ODE Net Environment Logic Check 
Date: Tue, 11 Jan 94 11:14:26 -0500
From: bound
X-Mts: smtp

Greg,

I am sending this to you as I am ready to begin building PATH MTU on
OSF/1 and need to do a logic check with you regarding my administrative
environment within USG for ODE.  Just trying to get started.

For recap the node I am using is ipng (16.140.144.110) off the violet
sub-network.  ipng is an Alpha Pelican.

Getting the right OSF/1 OS to do Development:
I found out recently that I cannot use ODE with my factory installed
version 1.2 of OSF/1.  I need to update I am told to OSF/1 BL8.
I set up ris on osfris machine for a remote install of T2.0-BL8 OSF/1.
When I did the setld from ipng I received permission denied.  Are my
permissions right for access or was this a quirk?  Is this the best
place to get BL8?

Building my Sandbox on ipng:
I will do a client installation of ODE and assume my ODE server is
osfris machine.  Can you verify that I have the proper source pool
access privileges on osfris and add me to the access control list (ACL)
for the source pool? 

What ODE Path Should I use:
To mount the ODE tools and source pool?  I am assuming /usr/sde and want
to use agosminor.  

Once I figure out the above I will contact Carol Rivard to get a
Kerberos password for Principal Name Jim_Bound, and begin setting up my
csh environment, sandbox, etc.

Comment on ris user interface:
When setting up ris on ULTRIX or OSF/1 (osfris) when presented with the
software kit options menu to remote install the screen scrolls past so
fast you loose the beginning entries to view.  Its so fast you cannot
even ctrl-S to stop it in time.  Not good.  

thanks
/jim



------- End of Forwarded Message