| Title: | DOCUMENT T1.0 |
| Notice: | **New notesfile (DOCUMENT.NOTE) now available (see note 897)** |
| Moderator: | CLOSET::ADLER |
| Created: | Mon Feb 09 1987 |
| Last Modified: | Thu Oct 31 1991 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 897 |
| Total number of notes: | 4397 |
I am not a technically proficient MicroVAX system manager who is
having the following problem.
I installed DOC010 for LSEDIT, then for POSTSCRIPT, then installed
DOCINT010. I assumed that since our only printer is an LN03R that
we didn't need to install either the LN03 support in DOC010 nor
the DOCLN03010. After installing these I wrote a very short document
as a test. I received the following error:
%DOC-F-NO_FONTS_FILE, No font file TEX$STANDARD_FONTS.POST_FONTS
for POSTSCRIPT destination
-RMS-E-FNF, file not found.
I then went back and installed LN03 support from DOC010 and DOCLN03010.
The error still occurs! I have read DOC_V10_INTERNAL_INSTALL.POST
and found it to be of no help (BTW at the end of page 1 it says:)
...as described in <referencef(internal_things_to_do).
I assume that this was to point to somethine???
As a last general comment, I copied the internal installation notes
(not a guide) over the network and followed the instructions which
didn't work at all. It never mentions the need to install support
for one device at a time. The installation of the LN03 and POSTSCRIPT
support portions of DOC010 always failed saying that duplicate files
were being unloaded with the backup command. I found files
PROVIDE_FILES.D and PROVIDE_FILES.C in both DOC010.A and DOC010.C,D.
I had to remove one of the copies to enable the install to complete.
Thanks for any help that ANYONE can give us.
-Ken Wilson
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 723.1 | CUPOLA::HAKKARAINEN | This too shall pass | Wed Jul 29 1987 09:26 | 7 | |
From which directory did you copy your kit and the installation
guide? It sounds as though you may have a mismatch of kits and
documentation. There is no longer a need to install support for
one device at a time.
Had Document been installed on your system before? If so, which
version/baselevel?
| |||||
| 723.2 | SPGSAM::SYSTEM | Wed Jul 29 1987 09:52 | 6 | ||
I copied the kits from CLOSET::KITS_:[DOCUMENT.V10].
And no, we had not previously installed Document.
???
Ken
| |||||
| 723.3 | CLOSET::ADLER | Wed Jul 29 1987 15:58 | 8 | ||
CLOSET::KITS_:[DOCUMENT.V10]DOC010.C and DOC010.D do not contain PROVIDE_FILES.C and .D (and never have). So I suspect that you've got some old versions of the savesets there (maybe they were left from a previous baselevel that someone decided against installing?), and suggest that you wipe out any kits that you have there, wipe out the directory tree DOC$ROOT:[000000...] and begin again. --Brian | |||||