| Title: | DOCUMENT T1.0 |
| Notice: | **New notesfile (DOCUMENT.NOTE) now available (see note 897)** |
| Moderator: | CLOSET::ADLER |
| Created: | Mon Feb 09 1987 |
| Last Modified: | Thu Oct 31 1991 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 897 |
| Total number of notes: | 4397 |
PAGE 11 of the VAX DOCUMENT Version T1.0 (Field Test Update) Release
Notes:
step 1 states that all DTP files should use the file type DESIGN.
Prior to that, reference is made to the LOCAL.FORMATS dir.
Question: base level 7 was installed prior to installing the new
version. Should all .DTP file types in the old tree be renamed
to .DESIGN or just those in the LOCAL.FORMATS dir?
next, it states "The file name changes are:"
TAG$ARTICLE.DTP TEX$ARTICLE.DESIGN
.
.
TAG$S_REFERENCE.DTP TEX$S_REFERENCE.DESIGN
.
but right before this it asks us to make reference changes - the
example that has been given shows us to change reference from
TAG$S_REFERENCE.DTP to TAG$S_REFERENCE.DESIGN <--------------------
I'm a little confused here - is the post-installation procs asking |
us to 1) rename all TAG* prefixes to TEX* in the old tree?, |
2) rename only those TAG* prefixed files on p11 to the listed |
TEX* prefixed files for the old tree? |
3) leave the old files alone and just change the type from .DTP |
to .DESIGN? |
|
If I were to change the prefixes to TEX* then the example given -----
needs to be changed to make reference to TEX$S_REFERENCE.DESIGN
instead of TAG$S_REFERENCE.DESIGN.
Since there exists a DOC$DESIGNS.DAT in the old tree - dirs:
[LOCAL.FORMATS]
[TEX.FORMATS]
should I make the changes mentioned on p12 to both files and then copy
them over to their corresponding dirs in the new tree or just the .DAT
file in [LOCAL.FORMATS]? And, if I make the changes, this would imply
that the TAG* prefixed files need to be renamed to TEX* prefixes
though I have yet to find documentation explicitly stating that this.
Thanks in advance.
Joel
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 501.1 | some clarification | CLOSET::ANKLAM | Fri Jun 12 1987 09:35 | 25 | |
You shouldn't make any changes at all in the BL7 tree. In copying
any *local* files from BL7's [DOCTOOLS.LOCAL.FORMATS] to
BL8's [DOC$TOOLS.LOCAL.FORMATS], you should change any local
DTP files to have the filetype DESIGN.
If you have any local doctypes, then you also need to:
1. change the name of the standard file (if any) that is input in
your local design file, i.e.
\input DOC$STANDARD_FORMATS:TAG$S_REFERENCE.DTP
would be changed to:
\input DOC$STANDARD_FORMATS:TEX$S_REFERENCE.DESIGN
2. Change any references in the local version of DOC$DESIGNS.DAT
that reference standard names.
If you don't have any local designs, you don't need to do any of
these things.
| |||||