| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 40.1 | Only one printer installed at a time | ATLAST::BOUKNIGHT | Everything has an outline | Mon Mar 02 1987 10:17 | 12 |
| As has been mentioned before in this notes file, is written up in
the installation guide, and was clearly stated in Patti's announcement,
YOU CAN NOT INSTALL MORE THAN ONE PRINTER AT A TIME WITH FT1.0.
RTFM!
Do the full installation for LSE and LPR. THEN go back and do a
partial installation for JUST LN03. Do this for EACH of the other
printers you want installed.
jack
|
| 40.2 | Not everything is clear | BUFFER::LEEDBERG | Truth is Beauty, Beauty is Truth | Mon Mar 30 1987 15:49 | 8 |
|
I have experienced the same failure - yes I read the FM but I do
not have LSE installed and I do not have any printer other than
an LN03 - so I can not run the IVP?
_peggy
|
| 40.3 | you can run it after | CLOSET::ANKLAM | | Mon Mar 30 1987 18:52 | 4 |
|
the installation guide explains how to run the IVP after having
installed LN03 support in a partial installation, pp. 15 and 16
|
| 40.4 | Manual running of IVP | BUFFER::LEEDBERG | Truth is Beauty, Beauty is Truth | Tue Mar 31 1987 11:35 | 14 |
|
The wording in the paragraph on the bottom of p15 is awkward and
should be in a NOTE for the Internal Field Test release.
I am installing on a uVAX that does not have any printers directly
connected to it.
The manual running of the IVP seems to have worked.
Thanks,
_peggy
|
| 40.5 | Device Conversion failure? | ATPS::DEMERS | Leo Demers | Thu May 14 1987 12:45 | 19 |
| The installation failed for me during the IVP while doing a Full Document
install with only the SDML and LINE_PRINTER options selected. I am using
the savesets from VAXUUM::KITS_:[DOCUMENT.UPDATE]
The first time I tried it I ran into a problem with the old DOC$ROOT
not being DEFINED/EXEC I deleted it and Reinstalled it but the IVP still
failes in the Device conversion. Did I copy over the correct savesets? Am
I missing something in the installation guide? - Leo
-------------------------------------------------------------------------
[ C o n t e n t s D e v i c e C o n v e r s i o n ]...
%DVC-I-IDENT, DVC$LPR T1.0-4
%DVC-E-NOINPUTPAGE, no pages in input file
%DVC-I-INPUTFILE, input file is:
vmi$root:[sysupd.doc010]DOC$SAMPLE_CONTENTS.DVI_LINE
-DVC-I-ONPAGE, on page [999-6]
%DOC-E-ERROR_CONVERTER, Errors found by the Device Converter.
%DOC-I-IVP_FAILURE, VAX DOCUMENT T1.0-001 IVP failed.
%VMSINSTAL-E-IVPFAIL, The IVP for DOC V1.0 has failed.
|
| 40.6 | still in dress rehearsal... | VAXUUM::KOHLBRENNER | | Thu May 14 1987 15:26 | 12 |
| The LINE destination does not work with /CONTENTS.
I believe that is documented in the release_notes.
The IVP tries to do /CONTENTS reagardless of the
destination that you specify, so it ALWAYS "fails"
if you specify LINE as the destination.
The important point: You got a good installation if
you got to the point of that failure.
Naturally, we'll clean up this part of the act before
the opening night performance.
|