| Title: | DOCUMENT T1.0 |
| Notice: | **New notesfile (DOCUMENT.NOTE) now available (see note 897)** |
| Moderator: | CLOSET::ADLER |
| Created: | Mon Feb 09 1987 |
| Last Modified: | Thu Oct 31 1991 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 897 |
| Total number of notes: | 4397 |
(1.)
Installed DOCUMENT T1.0.
When invoking following command:
$ DOCUMENT TESTMEMO MEMO LN01 (device defined during installation
to point to valid print queue LASER$PRINT)
get following error message prior to message stating job printing.
Topp 1.90
No such file: jinete
Unable to read font file jinete
Physical output received is flag page and then 1 blank page but not my memo.
What am I missing/doing incorrectly/etc? I have checked qualifiers
on the queue and all match with what is shown in back of installation
guide.
(2.)
Device LN03 and LINE work fine the way presently set up.
LN03 points to a print queue named FROST$PRINT. I have 5 LN03s
with 5 different print queues associated with them that I would
like to use for DOCUMENT output. How do I set this
up (if possible)? Eg. LN031 points to queue EMERSON$PRINT which
is a queue associated with an LN03.
Thanks.
Cheryle
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 27.1 | No LN01 fonts shipped in net kit | ATLAST::BOUKNIGHT | Everything has an outline | Wed Feb 25 1987 21:08 | 5 |
Sounds like you missed the statement that the LN01 fonts are NOT
shipped with the field test kit. You are going to have to get them
from the SDC. The installation notes describe the process.
jack
| |||||
| 27.2 | /PRINT=(QUEUE:queue-name) | VAXUUM::ADLER | Thu Feb 26 1987 13:06 | 5 | |
To use different print queues, specify $ DOCUMENT filename doctype LN03 /PRINT=(QUEUE:queue-name) --Brian | |||||
| 27.3 | LN01 still not working | CASPRO::CONEILL | Thu Feb 26 1987 16:52 | 16 | |
re. .1
Installed LN01 V1.0 Font Kit and defined logical LNO1$ROOT which
translates to SYS$SYSDEVICE:[LNO1.] where it was installed.
LNO1 device still not working. Still getting error message:
TOPP 1.90
No such file: jinete
Unable to read font file jinete
JINETE.TFM exists in DOC$LNO1_FONTS. What am I not doing/missing/etc.
please?
Cheryle
| |||||
| 27.4 | CLOSET::ADLER | Thu Feb 26 1987 18:10 | 7 | ||
It sounds like what you've installed is an LN01 font kit for DECpage fonts. To get the DOCUMENT LN01 fonts (which are different), send mail to VAXUUM::LN01FONTS. There will be an $855 charge for the DOCUMENT LN01 fonts. See the "VAX DOCUMENT Installation Guide for Internal Users" for more details. --Brian | |||||