Conference vaxuum::online_bookbuilding

287.0. "V1.2-B INSVIRMEM failure /ONLINE BOOKREADER" by STAR::DICKERSON (Philip - an Aussie in VMSland (ZK3-4)) Fri Mar 02 1990 14:37

    A bookbuild with DOCUMENT V1.2B BOOKREADER is failing with insufficient
    virtual memory, although it built correctly with an earlier version
    of DOCUMENT.

    After DOCUMENT V1.2B was installed, the following steps were performed:
    - DOC$LOCAL_FORMATS:DOC$DESIGNS.DAT and DOC$DESTINATIONS.DAT were
      edited according to instructions in 1.2B installation guide,
    - DCLTABLES were replaced on all nodes of the cluster,
    - DOC$STARTUP was executed on all nodes of the cluster.

    The batch log file follows:

$ DOCUMENT x.SDML; ONLINE.REFERENCE BOOKREADER -
  /COND=ONLINE/CONT/INDE=(GUIDE_HEADINGS,SORT=(LETTER)) -
  /NOPRIN/SYMB=x_SYMBOLS.SDML;
%DOC-I-IDENT, VAX Document V1.2-B    25-JAN-1990 11:47:33.75
[ T a g    T r a n s l a t i o n ]...
%TAG-I-DEFSLOADD, End of Loading of Tag Definitions
%TAG-I-SETCONDTN, Setting condition ONLINE
   on line 1 of file x.SDML;
%TAG-E-TAG_FAILS, The tag translator has detected a fatal error
-TAG-F-VMOVRFLOW, tag <ORIGINAL_MARGIN_ICON>, line 233, file
   x_CHAP.SDML
   Internal error. Failure to allocate additional space in virtual memory
-LIB-F-INSVIRMEM, insufficient virtual memory
%SYSTEM-F-ACCVIO, access violation, reason mask=04, virtual address=0000000C,
 PC=00000002, PSL=00463ADA
$ exit ($status + (0 * 1))
       job terminated at  2-MAR-1990 03:03:27.22
  Accounting information:
  Buffered I/O count:          149      Peak working set size:  8192
  Direct I/O count:            263      Peak page file size:   78390
  Page faults:               72456      Mounted volumes:           0
  Charged CPU time:     0 10:15:50.68   Elapsed time:     0 10:51:08.61

    *** Note the "peak page file size" and the "CPU time"

    The user's UAF quotas are as follows:
Maxjobs:         0  Fillm:       500  Bytlm:        32768
Maxacctjobs:     0  Shrfillm:      0  Pbytlm:           0
Maxdetach:       0  BIOlm:       300  JTquota:       1024
Prclm:           8  DIOlm:       300  WSdef:          512
Prio:            4  ASTlm:       600  WSquo:         1024
Queprio:         0  TQElm:       100  WSextent:     16384
CPU:        (none)  Enqlm:       600  Pgflquo:      75000

    The system's VIRTUALPAGECNT and other SYSGEN parameters of interest are:
Parameter Name             Current   Default   Minimum   Maximum Unit  Dynamic
GBLSECTIONS                    500       250        20      4095 Sections    
GBLPAGES                     50000     10000       512        -1 Pages       
NPAGEDYN                   1600000    300032     16384        -1 Bytes       
PAGEDYN                    1499648    190000     10240        -1 Bytes       
VIRTUALPAGECNT              270144      8192       512    600000 Pages       
WSMAX                        65500      1024        60    100000 Pages       


    The system's memory, page and swap file usage are as follows:
              System Memory Resources on  2-MAR-1990 12:59:22.83
Physical Memory Usage (pages):     Total        Free      In Use    Modified
  Main Memory (128.00Mb)          262144      210556       50643         945
Paging File Usage (pages):                      Free  Reservable       Total
  (swapfile)                                   49992       49992       49992    
  (pagefile)                                  195433      123650      199992    

    As it turned out there were two problems here. First, V1.2B had
    been installed on the system(s) but not the CUP ZK local kit which
    provides new bookname symbols files (among other things). Once this
    was corrected the footnote looping bug showed up. 

I'm having an almost identical problem. Where do I get the CUP ZK local kit? 
I can't find any reference to it. Does this mean I need to do a re-installation
of the Online tools? 

Thanks 
John

    Do you use either the VMS_BOOKNAMES symbol file,
    CUP$VMS_V50_BOOKNAMES.SDML, or the LP_BOOKNAMES symbol file
    CUP$LP_BOOKNAMES.SDML, that are provided by CUP ZK? If so,
    you can find information on the CUP ZK local kit in the DOCUMENT
    notes file, note 9.20. New versions of these files for V1.2B
    are provided in this kit.
    
    Do you still have a file called CUP$ONLINE_DEFS.GDX on your system?
    It is now obsolete, make sure you are not calling it into your
    bookbuild.
    
    Hope this helps, Chris

As far as I know, the book doesn't use these files - certainly not from the 
.SDML sources that I've written. The book only uses a symbol file that I've 
created.

I've installed the latest online tools as the kit we had was one day older than 
the one that's there now - but still the same problem. On this installation
I selected the option to delete all obsolete files so that shouldn't be a 
problem either.

Thanks for your help
John

    Please post the complete log file from your latest build (under 1.2B).
    
    Thanks,
    
    Mary