Conference vaxuum::online_bookbuilding

207.0. "VOILA Internal Error" by CDROM::DUPREZ () Tue Oct 10 1989 09:51

Hello,

	I got the following error while building a chapter along with
some front matter and an index.  The bulk of the log is listed below.
Any ideas as to what could be wrong?  It appears that the problem occurs
during device conversion AFTER inclusion of the figures.

	I built the same chapter with a PostScript destination and it came
out OK.  There doesn't seem to be a problem with unrecognized tags, etc.
I can't include the code, since I can't pinpoint where the problem is 
occuring and it's too large to include here.

	Could this simply be a problem with using an older baselevel?

						Roland


*****************************************************************************
I used this command to compile:

DOCUMENT/CONTENTS/INDEX=(GUIDE_HEADINGS,SORT=WORD) UC_PROFILE.SDML -
   ONLINE BOOK/SYMBOL=VMS_BOOKNAMES.SDML

%DOC-I-IDENT, VAX Document V1.1
[ T a g    T r a n s l a t i o n ]...
%TAG-I-DEFSLOADD, End of Loading of Tag Definitions
%TAG-I-LCL_MSG01, Using online bookbuilding tools, 20-MAR-89 baselevel
%TAG-I-ENDPASS_1, End of first pass over the input
%TAG-I-FILEWRTOK, File UC_FRONT_VOL1.TEX written
%TAG-I-FILEWRTOK, File UC_MOD3.TEX written
[ T e x t    F o r m a t t i n g ]...
%TEX-I-INFO, loading online doctype design file, TEX$O_REFERENCE - on page [1]
%TEX-I-LINETOOLONG, Line too long by 48.28677 points
-TEX-I-ONPAGE, on page [19]
		.
		.
		.
%TEX-I-LINETOOSHORT, Line too short - on page [100]
%TEX-I-PAGESOUT, 102 pages written.
-TEX-I-OUTFILENAME, '$1$DUA7:[HARMONY.UTLCOM.IMAGES]UC_PROFILE.DVI_BOOKREADER'
[ C o n t e n t s   G e n e r a t i o n ]...
[ T e x t    F o r m a t t i n g   C o n t e n t s ]...
%TEX-I-INFO, loading online doctype design file, TEX$O_REFERENCE - on page [1]
%TEX-I-PAGESOUT, 1 page written.
-TEX-I-OUTFILENAME, '$1$DUA7:[HARMONY.UTLCOM.IMAGES]UC_PROFILE_CONTENTS.DVI_BOOK
READER'
[ I n d e x    G e n e r a t i o n ]...
%INX-I-ENDPASS_1, End of first pass over input file:
   '$1$DUA7:[HARMONY.UTLCOM.IMAGES]UC_PROFILE.INX'
%INX-S-ENDPASS_2, End of second pass over input file.
%INX-S-CREATED, '$1$DUA7:[HARMONY.UTLCOM.IMAGES]UC_PROFILE_INDEX.TEX;1' created
[ T e x t    F o r m a t t i n g   I n d e x ]...
%TEX-I-INFO, loading online doctype design file, TEX$O_REFERENCE - on page [1]
%TEX-I-INFO, Index subentry more than 4 levels deep; ignored. - on page [1]
%TEX-I-INFO, Index subentry more than 4 levels deep; ignored. - on page [5]
%TEX-I-INFO, Index subentry more than 4 levels deep; ignored. - on page [7]
%TEX-I-PAGESOUT, 7 pages written.
-TEX-I-OUTFILENAME, '$1$DUA7:[HARMONY.UTLCOM.IMAGES]UC_PROFILE_INDEX.DVI_BOOKREA
DER'
[ D e v i c e    C o n v e r s i o n ]...
%DVC-I-INCLUDING, including input file:
   doc$local_formats:small_logo.rags
%DVC-I-INCLUDING, including input file:
   $1$DUA7:[HARMONY.UTLCOM.IMAGES]UC_PROFILE_CONTENTS.DVI_BOOKREADER;
%DVC-I-INCLUDING, including input file:
   ttb_x0316_88_bookfig.bin
%DVC-I-INCLUDING, including input file:
   ttb_x0317_88_bookfig.bin
%DVC-I-INCLUDING, including input file:
   ttb_x0318_88_bookfig.bin
%DVC-I-INCLUDING, including input file:
   ttb_x0319_88_bookfig.bin
%DVC-I-INCLUDING, including input file:
   ttb_x0320_88_bookfig.bin
%DVC-I-INCLUDING, including input file:
   ttb_x0322_88_bookfig.bin
%DVC-I-INCLUDING, including input file:
   ttb_x0321_88_bookfig.bin
%VOILA-F-BUGCHECK, VOILA internal error

(processing ends here)
***********************************************************************

    As it turns out, I was using the same ONLINE baselevel and DOCUMENT
    version as the correspondent in note 105.  I also got the same error,
    and as it turns out, I got the error by doing the exact same thing.
    
    After getting rid of the <online_popup> tags around the formal figures,
    everything worked fine.  My apologies for taking up the space in
    the notes file - it'll teach me not to add a note without checking
    the previous notes.
    
    							Roland