| I'm getting the same error message as .0 did, but it's when DOCUMENT is
trying to include the *index* file! I'm trying to process one chapter,
so I'm using a "mini-profile" as follows:
<PROFILE>
<ELEMENT>(front_matter.sdml) <comment>(title pg and preface for test)
<ELEMENT>(4804intro_chap.sdml) <comment>(Chapter 1)
<index_file>
<ENDPROFILE>
FRONT_MATTER.SDML contains the title page, the <contents_file> tag, and
the preface.
Here's the log file in all its glory. (I'm not concerned about the
undefined references, but I am concerned about the trademark table,
which I will mention in another note.) Any suggestions would be
appreciated. FWIW, another writer on my cluster was able to build
chapters of her book (and ultimately the entire book) for online with
no problem...
-- Nina
$ if F$MODE() .eqs. "NETWORK" then exit
$ if F$MODE() .eqs. "BATCH" then set noverify
$ set default SYS$LOGIN_DEVICE:[EPPES.FORMS.ONLINE]
$ DOCU USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.SDML; ONLINE.HANDBOOK
BOOKREADER/CONT/INDE=( GUIDE_HEADINGS,SORT=(LETTER))
/KEEP=(DVI,INT_TEX,INX,TEX)/LIST=USERF$:[EPPES.FORMS.ONLINE]
INTRO_PROFILE.LIS;/LOG/NOPRIN/SYMB=USERF$:[EPPES.FORMS]BOOKNAMES.SDML;
%DOC-I-IDENT, VAX Document V1.1
[ T a g T r a n s l a t i o n ]...
%TAG-I-TAG_IDENT, TAG$TRANSLATESHR, V1.1-P1
%TAG-I-DEFSLOADD, End of Loading of Tag Definitions
%TAG-I-LCL_MSG01, Using online bookbuilding tools, 20-MAR-89 baselevel
%TAG-W-TAGNOTDEF, at text on line 21 in file
FRONT_MATTER.SDML
Tag <TRADEMARK_TABLE> is undefined
%TAG-I-ENDPASS_1, End of first pass over the input
%TAG-I-FILEWRTOK, File FRONT_MATTER.TEX written
%TAG-W-SYMNOTDEF, at tag <REFERENCE> on line 85 in file
4804INTRO_CHAP.SDML
Symbol form_structure_chap is undefined
%TAG-W-SYMNOTDEF, at tag <REFERENCE> on line 328 in file
4804INTRO_CHAP.SDML
Symbol control_form_process_chap is undefined
%TAG-W-SYMNOTDEF, at tag <REFERENCE> on line 368 in file
4804INTRO_CHAP.SDML
Symbol samp_chap is undefined
%TAG-I-FILEWRTOK, File 4804INTRO_CHAP.TEX written
%TAG-I-UNDEFTAGS, There were 2 undefined tag invocations
[ T e x t F o r m a t t i n g ]...
%TEX-I-INFO, loading online doctype design file, CUP$O_DECWINDOWS_HAND - on
page [1]
%TEX-I-SHOWTOKEN, 'loading online doctype design file, CUP$O_DECWINDOWS_HAND
%TEX-I-PAGESOUT, 22 pages written.
-TEX-I-OUTFILENAME, 'SYS$LOGIN_DEVICE:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER'
[ C o n t e n t s G e n e r a t i o n ]...
[ T e x t F o r m a t t i n g C o n t e n t s ]...
%TEX-I-INFO, loading online doctype design file, CUP$O_DECWINDOWS_HAND - on
page [1]
%TEX-I-PAGESOUT, 1 page written.
-TEX-I-OUTFILENAME, 'SYS$LOGIN_DEVICE:[EPPES.FORMS.ONLINE]
INTRO_PROFILE_CONTENTS.DVI_BOOKREADER'
[ I n d e x G e n e r a t i o n ]...
%INX-I-CREATED, 'SYS$LOGIN_DEVICE:[EPPES.FORMS.ONLINE]INTRO_PROFILE.INX' created
%INX-S-TRUNCATED, string too long - truncated
%INX-S-ENDPASS_2, End of second pass over input file.
[ T e x t F o r m a t t i n g I n d e x ]...
%TEX-I-INFO, loading online doctype design file, CUP$O_DECWINDOWS_HAND - on
page [1]
%TEX-I-PAGESOUT, 2 pages written.
-TEX-I-OUTFILENAME, 'SYS$LOGIN_DEVICE:[EPPES.FORMS.ONLINE]
INTRO_PROFILE_INDEX.DVI_BOOKREADER'
[ D e v i c e C o n v e r s i o n ]...
$ ! input from DOCUMENT verb: DVC$INPUT = name of .dvi file
$ !
$ if ("" .eqs. "") then -
define/nolog DVC$VOILA DOC$VOILA_TOOLS:DVC$VOILA.EXE
$ $$drivoila := $ dvc$voila
$!
$ Filespec = f$parse("DVC$INPUT",,,,"SYNTAX_ONLY")
$ Nodename = f$parse("USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;",,,"NODE","SYNTAX_ONLY")
$ Devname = f$parse("USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;",,,"DEVICE","SYNTAX_ONLY")
$ Dirname = f$parse("USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;",,,"DIRECTORY","SYNTAX_ONLY")
$ Filename = f$parse("USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;",,,"NAME","SYNTAX_ONLY")
$ Filetype = f$parse("USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;",,,"TYPE","SYNTAX_ONLY")
$ Version = f$parse("USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;",,,"VERSION","SYNTAX_ONLY")
$ DVIspec = "USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;"
$!
$ $$drivoila "USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;" /h=36 /v=36
%DVC-I-INCLUDING, including input file:
doc$local_formats:small_logo.rags
%DVC-I-INCLUDING, including input file:
USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE_CONTENTS.DVI_BOOKREADER;
%DVC-I-INCLUDING, including input file:
donvan::artout:zk-7901.decw$bookfig
%DVC-I-INCLUDING, including input file:
donvan::artout:zk-7903.decw$bookfig
%DVC-I-INCLUDING, including input file:
donvan::artout:zk-7904.decw$bookfig
%DVC-I-INCLUDING, including input file:
USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE_INDEX.DVI_BOOKREADER;
%DVC-E-NOCONTENTS, no contents file found
-DVC-I-INPUTFILE, input file is:
USERF$:[EPPES.FORMS.ONLINE]INTRO_PROFILE.DVI_BOOKREADER;
-DVC-I-ONPAGE, on page [2]
%DVC-E-BOOKABORT, aborting run -- book not created
-DVC-I-BOOKABORT, book INTRO_PROFILE.DECW$BOOK not created
$ exit
EPPES job terminated at 4-APR-1989 15:15:51.24
Accounting information:
Buffered I/O count: 454 Peak working set size: 5833
Direct I/O count: 1008 Peak page file size: 12131
Page faults: 5099 Mounted volumes: 0
Charged CPU time: 0 00:01:30.14 Elapsed time: 0 00:02:47.18
|
| Oops... I'm sorry... I am getting different errors then previously
listed here.... The errors I am getting follow. One thing, we currently
don't have the lastest baselevel for the Bookbuilding tools. But,
it will be installed shortly.
Could that be my problem.? If so, sorry to bother you....
Judy
-----------------------------------------------------------------------
[ T e x t F o r m a t t i n g ]...
%TEX-W-CANNOTRESETMAG, Cannot change magnification, using old value: 8
%TEX-I-SCALED, Font was scaled: 1
%TEX-W-IGNORING, Ignored the following: '!AD'
-TEX-W-LINETOOSHORT, Line too short - on page !AS
-TEX-W-BADCHAR, Text line contains an invalid character
%TEX-I-SHOWCONTEXT, ' \par '
%TEX-I-MAXINPUTS, Maximum number of simultaneous input files is: 454
%TEX-I-FILENAME, 'BUCKY$DUA1:[GERBERG.IVCS]CHAPTER3.TEX;2'
-TEX-I-ONPAGE, on page [24]
%TEX-W-ENDDURING, '\end' occurred during '}'
%TEX-I-MAXINPUTS, Maximum number of simultaneous input files is: 456
%TEX-I-SHOWCONTEXT, '}'
%TEX-I-SHOWCONTEXT, ' %'
---------------------------------------------------------------------
%TEX-I-ATPT, Font was read at 7 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 7 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 7 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 7 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 7 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 47 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 47 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 74 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 74 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 74 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 74 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 74 pt
-TEX-I-ONPAGE, on page [20]
%TEX-I-ATPT, Font was read at 74 pt
-TEX-I-ONPAGE, on page [20]
%TEX-W-CANNOTRESETMAG, Cannot change magnification, using old value: 8
%TEX-I-SCALED, Font was scaled: 1
%TEX-W-IGNORING, Ignored the following: '!AD'
-TEX-W-LINETOOSHORT, Line too short - on page !AS
-TEX-W-BADCHAR, Text line contains an invalid character
%TEX-I-SHOWCONTEXT, ' \par '
%TEX-I-MAXINPUTS, Maximum number of simultaneous input files is: 399
%TEX-I-FILENAME, 'BUCKY$DUA1:[GERBERG.IVCS]CHAPTER3.TEX;4'
-TEX-I-ONPAGE, on page [53]
%TEX-W-ENDDURING, '\end' occurred during '}'
%TEX-I-MAXINPUTS, Maximum number of simultaneous input files is: 401
%TEX-I-SHOWCONTEXT, '}'
%TEX-I-SHOWCONTEXT, ' %'
%TEX-I-FILENAME, 'BUCKY$DUA1:[GERBERG.IVCS]CHAPTER3.TEX;4'
-TEX-I-ONPAGE, on page [53]
%TEX-I-PAGESOUT, 484 pages written.
-TEX-I-OUTFILENAME, 'BUCKY$DUA1:[GERBERG.IVCS]PROFILE.DVI_BOOKREADER'
%DOC-E-ERROR_INDEXER, Errors found by the indexer
|