| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 85.1 | Cut and Paste? | NITTY::THORNE | Department of Redundancy Department | Wed Apr 24 1991 10:17 | 9 |
| Are the sections here labelled 'PHASES OF STARTUP', 'SPECIFYING THE
SYSTEM CONFIGURATION', 'STARTING UP MULTIPROCESSOR SYSTEMS', and
'SHUTDOWN' duplications of the sections in Chapter 14 of SysNet I with the
same name and all the same subsection names? If so, I don't believe
review this detailed will be useful. Since the estimation of the
marketing folks is that people will tend to take Sysnet I and II con-
secutively, this redundancy will not escape the students!
Mark Thorne
|
| 85.2 | SYSNET II -- Maintaining Sys. Security | SUPER::WTHOMAS | | Mon Jun 10 1991 13:39 | 10 |
|
A draft of the twelfth Sysnet II chapter entitled:
Maintaining System Security
is available for review in:
SUPER::ES$REVIEW:[SYSNET_II]SYSNETII_CHAP12.PS
Wendy
|
| 85.3 | Some typos and omissions but OK | DUCK::SHONEK | Keith Shone UK Edu 830-4074 | Wed Jun 12 1991 09:15 | 39 |
| Omissions - prefixed [O]
Nits - prefixed [N]
Typos - prefixed [T]
Page Comment
-------------------
1-3 [O] bullet 2: responsibilities VAXcluster ->
responsibilities of VAXcluster ?
1-6 Bullet 5: wasn't sure whether the file name
was intended to be SYSUAF.DAT or SYSUAF.LIS -
as printed. How would a System Manager be expected
to use SYSUAF.LIS? Might be printed (NOT on a
public printer). Might be left in a directory - why?
Don't know - I'm pondering aloud (allowed is it?)
Certainly the file would collect a WORLD READ access
by default on most systems I know.
1-8 [O] Line 2: of file -> of the file
1-13a [O] Line 5: has be -> has to be
1-22 Example 1-2: The different case of the messages
after RETURN - was that intentional?
1-24 [O] The table makes references to ACL and identifier
SMITH but there are no ACLs shown. Am I missing something?
1-29a [T] subhead 3. resourse -> resource (phonetically sound,
if you don't mind the pun!)
1-32a [T] Line 14: command id the -> command in the
1-33a [N] How does one stop the quirky spacing indulged in
by VAX DOCUMENT in the second paragraph on this page?
1-34a [T] Line 4: system users is -> system user is
1-37 [O] Summary: What Summary?
|
| 85.4 | Comments from DC Training Center | TEACH::WENDY | | Sun Jun 16 1991 22:45 | 26 |
|
Chapter 12
Maintaining system security
1-7 I really think cluster security will go in one ear and out the cluster
since we havent covered how to build a cluster yet
1-12 1. TTY_DEFCHAR2 (*Put something in instructor notes about this.)
1-14 You are using the sysgen utility here, but in Chapter 10 (customization)
you didnt show them sysgen, you only show them sysgen thru sysman. Be
consistent and continue to use sysman here, or put sysgen examples along with
sysman in chapter 10.
1-15 This si a great example and explaination. Now I finally understand it!!
1-28ince this chapter is security, maybe we should have ACL's in here. We
mention them again, but not how to set them up. Bad idea.
1-30 I'm glad you cover this here and not with Authorize in sysnetI.
1-35 Make an instructor note on Devour and what it means.
Wendy Mullenhoff
|
| 85.5 | Capitol Ideas | TEACH::LYNN | | Fri Jun 28 1991 12:47 | 46 |
|
Maintaining System Security
Introduction Second bullet - wording is poor - what exactly do
you mean?
Objectives Second bullet - Where was this talked about within
the chapter?
Fourth bullet - Where did you actualy restrict a users
quota?
Quite a few pages were in regards to passwords. Maybe
list an objective for passwords.
1-7 The first sentence "A VAXcluster system is a single
management domain." Not always true.
1-8 Might want to let the customer know that these are system
overhead.
1-12 Would be nice to let the student know what TTY_DEFCHAR2
is.
1-13 Tell the student what $SETUAI is.
1-14 I'm not sure what the example actually does in regards to the
information printed on this page.
1-15 Not knowing this information, therefore being a student,
I really don't know what you are talking about on this
page. Alot of pieces evidently but please tie them
together. Thanks.
1-16 Might be better to move this page after page 12.
1-22 What about showing the SHOW INTRUSTION command and also
how to delete an entry?
1-35 Increase the print size.
1-36 Increase the print size.
Have a list of the Dangerous privileges. They always ask
for this.
Lynn White
Washington D.C.
|
| 85.6 | | SUPER::WTHOMAS | | Mon Jul 01 1991 15:06 | 7 |
|
The two week time period for reviews is over.
Any comments entered after this note will be considered, time
permitting.
Wendy
|
| 85.7 | Chapter 12 updated version available | SUPER::MORGAN | | Fri Jul 12 1991 14:36 | 39 |
| Thank you for all of your excellent comments. Most of the comments have been
implemented with a few exceptions. The end of this note is in response to
the comments that were not included.
A new version of the chapter has been copied to the review directory.
SUPER::ES$REVIEW:[SYSNET_II]SYSNETII_CHAP12.PS
Feel free to make comments, but be aware that any comments made from this date
on will only be considered after the pilot.
Thanks,
Bonnie Morgan
----------------------------------------
re: 85.4 - TEACH::WENDY
1-28 Since this chapter is security, maybe we should have ACL's in here. We
mention them again, but not how to set them up. Bad idea.
Reason for not making the change:
It was a necessary decision to move ACLs out to the System and Network Mgr III
due to the amount of material that needed to be covered in this course.
After the pilot, we may review this decision when we see how the material
flows and how long it takes to teach this course.
---------------------------------------
re: 85.5 - TEACH::LYNN
1-36 Increase the print size.
Have a list of the Dangerous privileges. They always ask
for this.
Reason for not making the change:
Some work has been done on this section. Please let me know if there is more
information that you feel is needed in this section.
|
| 85.8 | First teach post mortem | MELKOR::SWIERKOWSKIS | | Mon Jan 20 1992 11:36 | 105 |
| This reply is limited to technical errors only. I'll refrain from making
comments one way or the other about content, style, etc....
Module 8 (Maintaining System Security) in SYSNET II
p. 8-39 This example for breaking into a system will NOT work if
SYSTARTUP_V5.COM (or any procedure called from it) creates
the SYSUAF logical name.
See the following attachment for two breakin methods that WILL work no matter
what has been put into place by the system manager. NOTE: The second method
does NOT invoke STARTUP.COM; therefore, you have NO logical names.
Susan
_______________________________________________________________________________
EMERGENCY BREAKIN
First Method:
Halt the processor and boot conversationally. The specific method for doing
that will be processor specific. Set the system parameter that points to an
alternate SYSUAF.DAT file to true (1). Also set a minimum bootstrap. You
will have an open system when the boot sequence is complete and will be able
to log into a privileged account on OPA0:.
NOTE: Since you specified a minimum boot, you will not invoke your
site-specific startup procedures. (No user disks will be mounted, etc.)
SYSBOOT> SET UAFALTERNATE 1
SYSBOOT> SET STARTUP_P1 "MIN"
SYSBOOT> CONT
Log onto the system on OPA0: with any username and password. Before you run
the Authorize Utility, be sure to deassign the logical name of SYSUAF.
$ SHOW LOGICAL SYSUAF
$ DEASSIGN/SYSTEM/EXEC SYSUAF
$ SET DEFAULT SYS$SYSTEM
$ RUN AUTHORIZE
UAF> MODIFY SYSTEM/PASS=IFORGOT
UAF> EXIT
After you have modified the User Authorization File, run SYSGEN and reset the
value of UAFALTERNATE to false (0) and reset STARTUP. Otherwise, you will
have an open system and a minimum system again when you shut down and re-boot.
$ RUN SYS$SYSTEM:SYSGEN
SYSGEN> USE CURRENT
SYSGEN> SET UAFALTERNATE 0
SYSBOOT> SET STARTUP_P1 ""
SYSGEN> WRITE CURRENT
SYSGEN> EXIT
$ @SYS$SYSTEM:SHUTDOWN !Select Auto Reboot
Second Method:
Halt the processor and boot conversationally. Set your STARTUP file to
be OPA0:
NOTE: STARTUP.COM will not be invoked nor will any of your site-specific
startup procedures. You will not have any logical names available to you
and you will not be able to execute any shareable images (ie AUTHORIZE.EXE).
SYSBOOT> SET/STARTUP OPA0:
SYSBOOT> CONT
When you see the message on OPA0: that says it is okay to enter commands:
$ SET NOON
$ SPAWN
$ SPAWN
$ SET DEFAULT ddcu:[VMS$COMMON.SYSEXE] !Where ddcu is your System Disk
$ DIR *STARTUP* !If STARTUP.COM is found, invoke it.
$ @STARTUP
NOTE: If STARTUP.COM is not in the common area, find it....
Reset the Startup file in SYSGEN:
$ MC SYSGEN
SYSGEN> USE CURRENT
SYSGEN> SET/STARTUP "SYS$SYSTEM:STARTUP.COM"
SYSGEN> WRITE CURRENT
SYSGEN> EXIT
|
| 85.9 | EXPLAIN PLEASE | DLO10::SAYERS | | Thu Feb 13 1992 10:48 | 27 |
| This may not be the place to ask this but I have to show my ignorance
here and give it a shot.
I have questions on some of the statements in the book. I hope some of
you that have taught System Management more than I have (twice for me)
will have the answers.
Page 8-15 Mentions the sysgen parameters TTY_OWNER and TTY_PROT.
The student guide says that "By default, all terminals have the owner
specified by the system parameter TTY_OWNER and the protection
specified by the system parameter TTY_PROT."
When I look at these sysgen parameters, the values are 65540 and 65520,
respectively. (I realize they may be different on other systems.)
How are you guys explain this statement in the student guide? I know I
am probably showing my ignorance here but I am stumped.
Hope someone can clear this up for me. If this is not the place for
these questions, let me know where I should be entering them.
Thanks much,
Dee
|
| 85.10 | QUESTION - PAGE 8-17 | DLO10::SAYERS | | Thu Feb 13 1992 10:52 | 12 |
| Since I am still prepping, I will ask another question.
Page 8-17 Talks about the sysgen parameter LGI_BRK_TERM and suggests
if you are using terminal servers, that you might want to set this
parameter to 0 (default is 1).
What DCL command display does this change? I changed the sysgen
parameter and expected the Show Users/full command to only reflect the
username and not have the LAT associated with it. This did not happen.
Can someone give me an idea to use as an example for class?
Dee
|
| 85.11 | QUESTION - PAGE 8-26 | DLO10::SAYERS | | Thu Feb 13 1992 10:55 | 15 |
|
How are you guys explaining page 8-26 the refers to
Group mailbox logical names
Group global section names
Comment event flag clusters
When I sat this class, we skipped this page.
In this class, so far, we have not even discussed much about processes
and memory management.....how are some of you explaining data
structures?
Thanks again,
Dee
|
| 85.12 | Tricky looking Sysgen paramter... | SOAEDS::TRAYSER | Seniority means a bigger shovel! | Thu Feb 13 1992 18:25 | 25 |
| SYSGEN> SHOW TTY_PROT
Parameter Name Current Default Min. Max. Unit Dynamic
-------------- ------- ------- ------- ------- ---- -------
TTY_PROT 65520 65520 0 -1 Protection
Show device shows...
Dev Prot S:RWLP,O:,G:,W:
Break down TTY_PROT to binary and the protection mask is read
from Right to Left. 65520 is FFF0 in hex and is 1111111111110000
in Binary. Please note that the '1' means that user is DENIED
that access, so...
World Group Owner System
-------|-------|-------|-------
P L W R P L W R P L W R P L W R
1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0
...means that only system process can access the device by default.
Hope this helps...
$
|
| 85.13 | answer -- page 8-17 | SUPER::MATTHEWS | | Fri Feb 14 1992 15:45 | 8 |
| re .10 As far as I know, the only command where you'll see a
difference is SHOW INTRUSION.
The SHOW INTRUSION example in that chapter doesn't list any LAT
terminals, but you should be able to generate some login failures
on your own system & look at the SHOW INTRUSION output.
Val
|
| 85.14 | LGI_BRK_TERM | SOAEDS::TRAYSER | Seniority means a bigger shovel! | Sat Feb 15 1992 23:14 | 16 |
| re: .10 (page 8-17)
If LGI_BRK_TERM is set to 0 then it only records the Username used as the
primary 'check' to see if someone is breaking into your system. If only
'hard' lines are used, like TXA1, TTB5, then if someone was dialing in
the terminal number is always the same, thus Terminal/Username pair will
match during the breaking attempt.
However, if someone is using a LAT connecting to the system, each time
they reconnect to try and break in, the Terminal/Username pair will NOT
match and the security routines will not think this is the 4th, 5th, or
greater attempt at breaking in, since it is obviously a different line.
With LATs we aren't concerned about which terminal line they are using,
since it changes each time, just the Username.
$
|
| 85.15 | More on LGI_BRK_TERM | MINDER::GRAVESG | Geoff Graves,EDU(UK); DTN 851 2637 | Mon Feb 17 1992 04:05 | 12 |
| Re .10 and .14
Since VMS 5.2(?), the intrusion database records the server name and
port number, not the LTAnnn number.
So with LGI_BRK_TERM at its default value of 1, we still get a unique
terminal identified in a $SHOW INTRUSIONS display. Some sites prefer
this as it identifies the physical location of the attempted breakin, and
others are just concerned that they are "under attack", albeit from any
terminal, so they set LGI_BRK_TERM to 0.
Hope this helps...
|
| 85.16 | intrusion | TEACH::CHUCK | | Fri Mar 27 1992 13:03 | 7 |
| FYI:
To delete a line in the intrusion, you must follow case of the object
when you type it in. We had to pay with that a while until some
one stumbled onto it.
Chuck
|
| 85.17 | | TEACH::CHUCK | | Fri Mar 27 1992 13:52 | 71 |
| Page 8-28 I still would like to have the ACCOUT field = the Group
UIC field in these examples. We have to take the time to explain
why they do not match and how [admin,smith] is developed.
Page 9-4 Please add some other nodes to the Show network (for the
routing node). Make these notes more than 1 hop away. If we have
this we can build a map on the board of how the network is layed
out. I added 2 nodes to this for the students:
node cost hops next hop to node
powers 10 3 una-0 rael
jim 9 2 una-0 rael
If I add this to what we have we can now develop the following on
the board explaining hops and cost and how they are physically
layed out. This diagram could go on page 9-4a if it is worthy
|--------------------------------------------------------------------|
| /|\ | |
| | | |
| cost=8 | |
------------------ ---------------------- ------------------
| una-0 | | | | |
| arakis | | rael | | aurora |
| | | | | |
------------------ ---------------------- ------------------
| cost = 1
| |
| \|/
----------------------
| |
| jim |
| |
----------------------
| cost = 1
| |
| \|/
----------------------
| |
| powers |
| |
----------------------
Doing the above gives them some idea of what they are looking at
and a way to visualize it.
also Cost can be 1-63 and Ethernet default is cost = 3
this can go on the ins. page also.
Page 9-6 "0 if the network is not divided into areas" I am not
a network person but I had not seen this before and question it/
Is there anyone who knows for sure if this is correct.
nnnn is from 1 to 1023 not 1024.
page 9-12 Could you put a note on the "a" page to explain
Clear node Zodiac all
What I am interested in is the "all". I could not find "clear"
in the s.m. Manual
Chuck
|
| 85.18 | I like diagram, but put non-default cost on Inst's page | SOAEDS::TRAYSER | Seniority means a bigger shovel! | Fri Mar 27 1992 14:05 | 5 |
| Good idea, but I'd suggest the diagram have DEFAULT costs displayed and
allow the instructors to discuss changing from the default costs if it
seems appropriate for the class.
$
|