Conference 44.370::system_management

442.0. "FORTRAN on CURRNT -error parsing 'DESIGN'" by CURRNT::DAW (The Real thing .......) Tue Oct 01 1991 13:45

	Hi Mob,

	We've been getting teh following error, whenever we've been trying to
	compile a FORTRAN program:

$ FORTRAN -
    /LIST -
    /CHECK=ALL -
    /NOWARNINGS -
    /DEBUG -
    /noOPTIMIZE -
    COP$DIR_SRC:CPS_UKO_FND_IMG_ID_PRG.FOR
%CLI-F-SYNTAX, error parsing 'DESIGN'
-CLI-E-ENTNF, specified entity not found in command tables
%TRACE-I-BADDST, no symbols in image
%TRACE-F-STACKDUMP, non-symbolic stack dump follows
module name     routine name                     line       rel PC    abs PC

                                                           7FF1A844  7FF1A844
                                                           7FF1A64A  7FF1A64A
                                                           7FF1A16B  7FF1A16B
                                                           00000242  00000242
                                                           000038BF  000038BF
                                                           0000499A  0000499A

	The Fortran notes conference suggests:

    FORTRAN installed new DCLTABLES.  On every cluster member you need
    to INSTALL/REPLACE DCLTABLES; users will be able to use the compiler

	and
    Also look to make sure he doesn't have a DCLTABLES in the root
    directory of SYS$LIBRARY.  If so, then that one gets installed after
    you install FORTRAN (and if you do a REPLACE of DCLTABLES).

    If they do, then delete the one in the root and keep the one in
    the common directory of SYS$LIBRARY.

	Can anyone help ?

	Wob

	Fortran has be re-installed on CURRNT, and on each node of the cluster
	an INSTALL/REPLACE DCLTABLES has been executed, however after logging
   	out and back in, I still get the same error on one of ther nodes
        (YARD). The workaround appears to be to execute

		$SET COMMAND SYS$LIBRARY:FORTV5CLD.CLD
                                         
	on the offending node, then I don't get the problem. However I don't
    	want to have to put this line in my application build procedure - as
    	it's not really on !

	Can anyone help again ?

	Wob
        

he should be able to help....

but I'm at a loss to understand the problem, esp. as Fotrtran has been
re-installed - whas this done on YARD or FOOT? Maybe YARD needs
rebooting to bring it up cleanly?

Peter.