| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 400.1 | | CUCKOO::OTTEN | Umbrellas, Minds, and systems | Fri Feb 01 1991 09:04 | 5 |
| I Know it's in LTLOAD, but which Parameter??
/Group=110
David
|
| 400.2 | | BACK::haycox | Ian | Fri Feb 01 1991 09:27 | 32 |
| Are you sure it's LTLOAD.COM ?
Changes in startup procedure:
-----------------------------
* LAT$SYSTARTUP now in SYS$COMMON:[SYSMGR]
SYS$STARTUP:LAT$STARTUP. Do not modify this file. It calls -
SYS$STARTUP:LAT$CONFIG.COM to start up LAT site-independent commands
SYS$MANAGER:LAT$SYSTARTUP.COM to start up LAT site-SPECIFIC commands
LAT/Master V1.4 user:
No change.
LAT/Master V1.3 user:
Move LAT$SYSTARTUP.COM from SYS$STARTUP to SYS$MANAGER.
LAT/Master V1.2 user:
Move all your LAT site-specific commands from your original
SYS$STARTUP:LAT$STARTUP.COM to SYS$MANAGER:LAT$SYSTARTUP.COM. Use
LAT$SYSTARTUP.TEMPLATE as a guide. Remember to change your
SYSTARTUP_V5.COM to call $@SYS$STARTUP:LAT$STARTUP.COM (or
$@SYS$MANAGER:LTLOAD) instead of $@SYS$STARTUP:LAT$CONFIG.COM.
LAT/Master V1.1 user:
Move all your LAT site-specific commands from your
SYS$MANAGER:STARTLAT.COM to SYS$MANAGER:LAT$SYSTARTUP.COM. Use
LAT$SYSTARTUP.TEMPLATE as a guide.
LTDRIVER V5.4 or earlier user:
Move all your LAT site-specific commands from your original LTLOAD.COM
to SYS$MANAGER:LAT$SYSTARTUP.COM. Use LAT$SYSTARTUP.TEMPLATE as a guide.
|
| 400.3 | | CUCKOO::OTTEN | Umbrellas, Minds, and systems | Fri Feb 01 1991 11:07 | 1 |
| Running EASE 5.3-2, none of those file seem to exist...
|
| 400.4 | old stuff... | HEWIE::RUSSELL | Well, it was here a minute ago... | Fri Feb 01 1991 13:43 | 14 |
| Gee, aren't you running VMS V5.4-1A yet????
Seriously, wherever the LAT service is started (and it will be in
some *LAT*.com or *LT*.com file), add group 110 now, and then remove
the other groups after the E-LAN is confirmed as working OK.
If you are running EASE, have a look in the *START*.LOG file in
SYS$MANAGER or somewhere; it's a 500 or so block log of the system
startup - search it for LAT or LT, and work it back from there.
If you have problems, please come down and see us, or go along to
EIS OPS for help.
Peter.
|
| 400.5 | | CURRNT::OTTEN | OK chaps.. Back on your heads.. | Wed Feb 20 1991 15:37 | 9 |
| Under EASE 5.3-2, it's sys$manager:Lat_start.com
$ MC LATCP
SET NODE/group=110
CREATE SERVICE
etc...
David
|