| Title: | system management communications forum |
| Moderator: | CHEST::THOMPSON |
| Created: | Fri Mar 21 1986 |
| Last Modified: | Thu Jul 08 1993 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 490 |
| Total number of notes: | 2018 |
Announcing Cluster Wide -the Democratisation of the LCG01 colour printer
1) All nodes in the ADG clusters will shortly have access to the LCG01
colour printer in A-Block printer room.
To use it you'll need to pick up a couple of symbols defined in the
system wide login. Then you can print files (REGIS/SIXEL and a few other
obscure formats) as follows:
$ LCG myfile.SIXel
Enter the name of the LCG01 print queue (default: CLRA1):
Enter the desired number of copies (default: 1):
Add bolding for transparencies? (default: NO)
Black white reversal? (default: NO)
Portrait (P) or Landscape (L) (default: P):
Job MYFILE (queue CLRA1, entry 44) printing
... and wait a few minutes while the LCG01 winds up its rubber bands
and prints.
Martin Gurran is keeping up with new graphic display developments
and is the person to contact if you want help with the software.
Suky Hundal has volunteered to look after the LCG01 printer
hardware.
One very important point, unless you know exactly what you're doing
PLEASE PLEASE PLEASE do not fiddle with the buttons on the printer
yourselves; it's extreeeemly temperamental and can take a long time
to set up again - call Suky instead.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 297.1 | LCG01 printer queue working | NECK::THOMPSON | Jerry Thompson (7)781-4421 | Fri Nov 24 1989 16:48 | 11 |
FUTURS/CURRNT/PASTIT and all workstations booted from PERKY now have access to the LCG01 printer via the queue CLRA1. It's intended to use this printer for transparencies only, but for the time being the default output medium will be paper. If you want an overhead slide printed out then contact Suky Hundal before you print it. He'll load the transparency blanks for you. When (and if) we get the reverse LAT service working to the LJ250 colour printer on LEG, that will become available for paper copies of colour prints and the LCG01 will be used for transparencies only. | |||||
| 297.2 | Gotta dodgy printa mate ? | VULCAN::DAW | Just like Indiana Jones, He's back! | Wed Aug 01 1990 12:05 | 12 |
H E L P !
Does anyone out there have access to an LCG01 colour printer ?
I'm drawing up some slides for a presentation and need access to
one so that I can print the transparencies !
Does anyone know of anyone with access to one ?
Regards,
Rob
| |||||