| Ciao Agata,
> - is FTSIE 2.0 supported on DNVEXT ?
The official answer is no because DEC FTSIE V2.0 was basically tested using
DECnet/OSI V5.5. It should work however without any problems.
> - why have I to use FTSI 1.4* over DNVEXT?
As you may well realise a lot of customers are running an 'adapted' version
of VAX/FTSIE V1.4(E) on DNVEXT due to the 'earlier unavailability' of
DEC FTSIE V2.0. This adaptation of VAX/FTSIE V1.4E was hopefully done
in return for $$s.
So the position of FTSIE is tightly linked to the status of the underlying
DECnet products.
I hope the underlying 'support matrix' answers all your questions.
Va bene ?
John
VMS Version DECnet product FTSIE product Status
=========== ============== ============= ======
V5.4-3 VOTS V2.0B VAX/FTSIE V1.4E VOTS V2.0B in retirement
Therefore FTSIE in retirement.
No further changes will be made
to the product.
V5.5-2 DNVEXT VAX/FTSIE V1.4E* Local support issue.
(VOTS V3.0) DEC FTSIE V2.0 works - no official support
statement
NOTE! DNVEXT will run out of
at the end of December 1993.
V5.5-2 DECnet/OSI V5.5 VAX/FTSIE V1.4E* Local support issue.
(VOTS V3.0) DEC FTSIE V2.0 supported
NOTE! DECnet/OSI V5.5 will run
out of support early 1994.
V5.5-2 DECnet/OSI V5.6 DEC FTSIE V2.0 supported
Note due to error in DECnet/OSI
V5.6 you must have V5.6B MUP
+ ECO04010 (at the time of
writing this hasn't been
release yet)
V6.0 DECnet/OSI V5.7 DEC FTSIE V2.0 support statement outstanding
should work - has to be tested
VAX/FTSIE V1.4E* = adapted by local office/customer
Support for OpenVMS and OSF/1 for AXP are in discussion. If you have any
requirements please contact the present Product Manager Michael Eisenhut @UFH.
The more people that ask for it the more likely that DEC FTSIE will
appear on these platforms.
|