| Title: | Siemens Connectivity |
| Notice: | FTSIE Contact is Michael Eisenhut @MUC 865-1487 |
| Moderator: | UFHIS::MEISENHU |
| Created: | Tue Aug 30 1988 |
| Last Modified: | Mon Feb 19 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 195 |
| Total number of notes: | 512 |
Hello, I have a problem with FTSIE. I try to install it in order to do file-transfer with a SIEMENS running also FTAC. When I make a copy to the SIEMENS,I get the following on a X25-trace. We make the call Call >> SIEMENS Call confirm << SIEMENS We send the following: (in HEX) 002ED32D EA000001 0022010B 03444543 0658312E ; .#L# ..#.#### # ## 302E33C0 010BC108 40404040 40404040 C2085BC6 ; ######A# B#$F D1C1D440 4040C601 03000000 00000000 00000000 ; JAM F##........... And then the call is cleared by the siemens Cause 00 Diag 00 What do we wrong,or is it FTAC ?? Any info is welcome. We use PSI 4.3 with fixkit and FTSIE1.4 D Regards Danny Goovaerts
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 148.1 | FTSIE V1.4D is a NoNo | BIKINI::DITE | Phase V makes ~~~ OK! | Thu Oct 08 1992 02:13 | 21 |
Hi, as I mentioned to you on the phone... The connection to the Siemens PDN was successful. The Transport CR should have been passed to $BCAMNET. If you know get a disconnect it could be because: 1) Siemens expects other Info in the OSI Transport CR with FTAC >We use PSI 4.3 with fixkit and FTSIE1.4 D You must be one of the few (unlucky) people to have a copy of FTSIE V1.4D. I think it's been mentioned before in this conference but this version was released soon after it's release. Please use FTSIE V1.4E available as always from MUNLEG::FTSIE$PUBLIC: Hope that helps. regards John | |||||