Conference share::zap

114.0. "%ZAP-F-NOTENABLED" by TRNOIS::CORTESE () Fri May 22 1992 08:39

    Hi All,
    
    	Sorry for disturbance, but I have a little trouble with my ZAP
    5.0...
    
    	In little words, the process of ZAP on my systems ( a VAXcluster of
    three nodes, two 6420 and a 8810 ) dies as soon as started!!!
    
    	Messages in ".log" are as follows:
    
    =======================================================================
    
$ !*	ZAP$DIR:ZAP$MONITOR.COM
$
$ !***************************************************************************
$ !
$ !                          COPYRIGHT (C) 1992 BY
$ !                    DIGITAL EQUIPMENT CORPORATION, MAYNARD
$ !                     MASSACHUSETTS.  ALL RIGHTS RESERVED.
$ !
$ !  THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
$ !  ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION
$ !  OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY OTHER COPIES
$ !  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER
$ !  PERSON.  NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
$ !
$ !  THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND
$ !  SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION.
$ !
$ !  DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
$ !  SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
$ !
$ !***************************************************************************
$
$ !	This procedure is executed in a detached process via LOGINOUT.EXE
$ !	so that Zap will run with a CLI.  This is done so that it may
$ !	create sub-processes to log out users with user written DCL command
$ !	procedures.
$
$	Define/job/exec sys$login SYS$SYSDEVICE:[ZAP]
$	Define/job/exec sys$login_device SYS$SYSDEVICE:
$	Define/job/exec sys$scratch SYS$SYSDEVICE:[ZAP]
$
$	@ZAP$Dir:ZAP$Logicals
$ !*	ZAP$DIR:ZAP$LOGICALS.COM
$
$ !***************************************************************************
$ !
$ !                          COPYRIGHT (C) 1992 BY
$ !                    DIGITAL EQUIPMENT CORPORATION, MAYNARD
$ !                     MASSACHUSETTS.  ALL RIGHTS RESERVED.
$ !
$ !  THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
$ !  ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE INCLUSION
$ !  OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY OTHER COPIES
$ !  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER
$ !  PERSON.  NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
$ !
$ !  THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE AND
$ !  SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT CORPORATION.
$ !
$ !  DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
$ !  SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
$ !
$ !***************************************************************************
$
$	Set noon
$
$ !	Define file logicals
$
$	Nodename = f$edit(f$getsyi("nodename"),"trim,upcase")
$	If Nodename .nes. "" Then Nodename = f$fao("_!AS",Nodename)
$
$	Define/Nolog	ZAP$Config_File		ZAP$Dir:ZAP$Config_TRNOI2.Dat
$	Define/Nolog	ZAP$Error_File		ZAP$Dir:ZAP$Error_TRNOI2.Log
$	Define/Nolog	ZAP$Exception_File	ZAP$Dir:ZAP$Exception_TRNOI2.Dat
$	Define/Nolog	ZAP$History_File	ZAP$Dir:ZAP$History_TRNOI2.Dat
$	Define/Nolog	ZAP$Logout_File		ZAP$Dir:ZAP$Logout_TRNOI2.Dat
$	Define/Nolog	ZAP$Log_File		ZAP$Dir:ZAP$Log_TRNOI2.Log
$	Define/Nolog	ZAP$Report_File		ZAP$Dir:ZAP$Report_TRNOI2.Rpt
$	Define/Nolog	ZAP$Warning_File	ZAP$Dir:ZAP$Warning_TRNOI2.Dat
$
$ !	Insure that common files are used if no specific files present
$
$	If f$search("ZAP$Config_File") .eqs. "" Then -
		Define/Nolog ZAP$Config_File		ZAP$Dir:ZAP$Config.Dat
$	If f$search("ZAP$Exception_File") .eqs. "" Then -
		Define/Nolog ZAP$Exception_File		ZAP$Dir:ZAP$Exception.Dat
$	If f$search("ZAP$Warning_File") .eqs. "" Then -
		Define/Nolog ZAP$Warning_File		ZAP$Dir:ZAP$Warning.Dat
$	If f$search("ZAP$Logout_File") .eqs. "" Then -
		Define/Nolog ZAP$Logout_File		ZAP$Dir:ZAP$Logout.Dat
$
$	Exit 1
$
$	Show logical/process

(LNM$PROCESS_TABLE)

  "SYS$COMMAND" = "_$1$DUS30:"
  "SYS$DISK" = "SYS$SYSDEVICE:"
  "SYS$ERROR" = "_$1$DUS30:"
  "SYS$INPUT" = "_$1$DUS30:"
  "SYS$OUTPUT" [super] = "_$1$DUS30:"
  "SYS$OUTPUT" [exec] = "_$1$DUS30:"
  "TT" = "ZAP$DIR:ZAP$MONITOR.COM"
  "ZAP$CONFIG_FILE" = "ZAP$DIR:ZAP$CONFIG.DAT"
  "ZAP$ERROR_FILE" = "ZAP$DIR:ZAP$ERROR_TRNOI2.LOG"
  "ZAP$EXCEPTION_FILE" = "ZAP$DIR:ZAP$EXCEPTION.DAT"
  "ZAP$HISTORY_FILE" = "ZAP$DIR:ZAP$HISTORY_TRNOI2.DAT"
  "ZAP$LOGOUT_FILE" = "ZAP$DIR:ZAP$LOGOUT.DAT"
  "ZAP$LOG_FILE" = "ZAP$DIR:ZAP$LOG_TRNOI2.LOG"
  "ZAP$REPORT_FILE" = "ZAP$DIR:ZAP$REPORT_TRNOI2.RPT"
  "ZAP$WARNING_FILE" = "ZAP$DIR:ZAP$WARNING.DAT"
$	Show logical/job

(LNM$JOB_8218A190)

  "SYS$LOGIN" = "SYS$SYSDEVICE:[ZAP]"
  "SYS$LOGIN_DEVICE" = "SYS$SYSDEVICE:"
  "SYS$SCRATCH" = "SYS$SYSDEVICE:[ZAP]"
$	Show process/priv

22-MAY-1992 12:06:43.58   User: SYSTEM           Process ID:   21C00AED
                          Node: TRNOI2           Process name: "ZAP$Monitor 5.0"
 
Process privileges:
 CMKRNL               may change mode to kernel
 SYSNAM               may insert in system logical name table
 SETPRV               may set any privilege bit
 TMPMBX               may create temporary mailbox
 WORLD                may affect other processes in the world
 OPER                 may perform operator functions
 EXQUOTA              may exceed disk quota
 
Process rights:
 INTERACTIVE                       
 REMOTE                            
 AUTH_CLUSTER                      
 INSPECT$SECURITY_MANAGER          
 ADM2                              
 CS2                               
 SA2                               
 STDUSER                           
 ID$IDC_DEFAULT_SYSTEM             
 ID$SAED_IDC_DEFAULT               
 MRE$SUPPORTER                     
 DMR                               
 DMW                               
 DDAL$TR_MON                       
 
System rights:
 SYS$NODE_TRNOI2                   
$
$	Run Zap$Dir:Zap$Monitor
%ZAP-I-VERSION, DEC ZAP for VMS Version V5.0
%ZAP-I-STARTINGON, Starting at 22-MAY-1992 12:06:44.36 on TRNOI2
%ZAP-I-CONFIG, VAX 6000-420 running VMS V5.4-2  
%ZAP-S-PRCCON, Processing configuration file ZAP$Config_File
%ZAP-S-PRCEXC, Processing exception file ZAP$Exception_File
%ZAP-S-PRCMSG, Processing message file ZAP$Warning_File
%ZAP-I-MSGLEN, Message is 163 characters long
%ZAP-S-PRCMSG, Processing message file ZAP$Logout_File
%ZAP-I-MSGLEN, Message is 97 characters long
%ZAP-I-SENSITIVITY, Idle process sensitivity set to 5
%ZAP-I-TRACEBCK, Process owner traceback is enabled
%ZAP-I-LENIENT, Tracebacked processes will use most lenient rule
%ZAP-I-NODEBUG, Monitor debugging is disabled
%ZAP-I-WARNTIMES, Warning messages will be sent 9 7 5 3 1 minutes before action is taken
%ZAP-I-NOINSWAP, Swapped out processes will be ignored
%ZAP-I-IGNSUSP, Suspended processes will be ignored
%ZAP-I-GROUPDW, Related DECwindows processes will be grouped together
%ZAP-I-HISTORY, History information will be generated
    
---->>>>%ZAP-F-NOTENABLED, The monitor has been disabled <<<<----
---->>>>%ZAP-F-NOTENABLED, The monitor has been disabled <<<<----
 
     SYSTEM       job terminated at 22-MAY-1992 12:06:45.68

  Accounting information:
  Buffered I/O count:              67         Peak working set size:     825
  Direct I/O count:                76         Peak page file size:     16193
  Page faults:                   1092         Mounted volumes:             0
  Charged CPU time:           0 00:00:02.48   Elapsed time:     0 00:00:05.77
    %ZAP-S-PRCMSG, Processing message file 77
    ==============================================================================
    
    
    ...Any suggestions?...
    
    	Thanks in advance,
    	Flavio.
    
    
    

As noted in the documentation, the monitor is initially installed in a disabled
state to insure that you configure it before it is started.  If you are
satisfied with the configuration, then use the:  @ZAP$DIR:ZAP$CONFIG  procedure
to change the value of the ENABLE qualifier to TRUE.

Section 3.1.2 of the reference guide explains this value.

					Keith Maconi

    OOOooops, that mistake!!
    
    	Thank you, Keith!
    	
    		Flavio.