| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 8.1 | answers to help you keep going | CINEMX::COPUSER88 | Cynde Becker DTN 269-2111 | Fri Sep 16 1988 11:57 | 62 |
| <<< ORCHRD::SYS$SYSDEVICE:[NOTES$LIBRARY]COPIS_USERS.NOTE;2 >>>
-< COPIS VAXination Users Conference >-
================================================================================
Note 8.1 Problems getting going. 1 of 3
CINEMX::COPUSER88 "Cynde Becker DTN 269-2111" 54 lines 14-SEP-1988 17:28
-< Answers to help you keep going >-
--------------------------------------------------------------------------------
Dan,
Thank you for your input. Here are some answers to your questions.
<
< 1) Is it possible to delete a user defined aggregate?
<
The aggregate maintanence screen (AG1) will be changing in the near
future. There will be the ability to add and delete a user-defined
aggregate on the same screen. There will no updates to aggregates
- a user can delete the present aggregate and create another.
<
< 2) Is it possible to change a field on the aggregate maintenance
< screen once I have gone past the field?
You can use the F12 or (BS) key on the VT200 series terminal
(the Hyph-Backspace key on the VT100/Rainbow/Pro Terminal) to move
backwards through the criteria fields if you have NOT begun execution
of the creation an aggregate.
<
< 3) I was doing a query within pa10, I keyed in all the information
< that was needed and after I hit return, I was given a message
<
< "%rem-s-end, control returned to node planet::"
<
< and I was back to my system. Could this be a problem with
< Copis or the Network?
At first glance, this appears to be a problem with the COPIS
system, perhaps a database was being reloaded early. I have referred
your problem to the COPIS VAX Technical team for review.
<
< 4) Is there a way to get totals on the report under screen pa13?
<
Totals will be added to all planning data in the near future.
Whether there will be a separate screen or perhaps the totals will
just appear on the first screen is not know at this time. Please
write in NOTES if you have a preference on how totals should be
displayed.
cb
|
| 8.2 | Network Problem | CINEMX::COPUSER88 | Cynde Becker DTN 269-2111 | Fri Sep 16 1988 11:57 | 29 |
| <<< ORCHRD::SYS$SYSDEVICE:[NOTES$LIBRARY]COPIS_USERS.NOTE;2 >>>
-< COPIS VAXination Users Conference >-
================================================================================
Note 8.2 Problems getting going. 2 of 3
CINEMX::COPUSER88 "Cynde Becker DTN 269-2111" 21 lines 15-SEP-1988 11:28
-< Network Problem >-
--------------------------------------------------------------------------------
<
< 3) I was doing a query within pa10, I keyed in all the information
< that was needed and after I hit return, I was given a message
<
< "%rem-s-end, control returned to node planet::"
<
< and I was back to my system. Could this be a problem with
< Copis or the Network?
<
Dan,
My apologies. After consulting with the Technical team, there
was a problem with the network. It is not clear on which end you
were dropped from but please call the hotline at DTN 269-2500 if
this happens again.
cb
|
| 8.3 | Supergroups coming from DEC-10 | CINEMX::COPUSER88 | Cynde Becker DTN 269-2111 | Fri Sep 16 1988 11:59 | 44 |
| <<< ORCHRD::SYS$SYSDEVICE:[NOTES$LIBRARY]COPIS_USERS.NOTE;2 >>>
-< COPIS VAXination Users Conference >-
================================================================================
Note 8.3 Problems getting going. 3 of 3
CINEMX::COPDEV11 "Kathie Colbert" 36 lines 15-SEP-1988 13:02
-< Supergroups coming from DEC-10 >-
--------------------------------------------------------------------------------
< Note 8.0 by CINEMX::RICHARDS "DAN RICHARDS DTN 282-1411" >
-< Problems getting going. >-
>> 5) How do I go about getting an supergroup put on the new Copis
system that will belong to somebody else? I would like to
do some testing, however I do not have any supergroups of
my own.
Hi :
In order to install a (DEC-10)supergroup we need to know the name of
the required group , a responsible person and their badge number. This
additional feature will be used to keep your aggregation, in the future,
secure from others tampering with it. When we recieve you request through
the hotline we will then place your supergroup(aggregation) onto the VAX
you will then be notified of it's availibility.
Any other questions on aggregations may be answered by myself or
the ICO hotline.
Regards :
Kathie Colbert - Technical rep for COPIS VAX Reference Information
250-2193
|
| 8.4 | AGGREGATES SPLIT BY AREA | CINEMX::BARAN | PAULA BARAN DTN 226-2594 | Wed Sep 21 1988 13:51 | 5 |
| I WOULD LIKE TO KNOW IF THERE IS A WAY TO PULL THE FOLLOWING
INFORMATION FOR AGGREGATE; SPP,AND FLEX BY MODEL WITHIN A "SUPER-GROUP
SPLIT BY AREA. IT IS A BUSINESS NEED OF SSM MAT OPS TO RETRIEVE
THIS INFORMATION.I HAVE BEEN LOOKING THROUGH THE VARIOUS SCREENS
AND HAVE NOT FOUND A WAY TO GET AT THIS INFORMATION.
|
| 8.5 | The screens will be available within the next few weeks | CINEMX::COPDEV61 | | Wed Sep 21 1988 14:02 | 12 |
| In a subsequent release of COPIS, there will be screens for both
aggregates and 2-5-2 part numbers which will display ship plan
(upflex may also be included) split by geographic area.
In addition, there will be screens which display ship plan,
upflex, downflex, or ship plan plus upflex split by planning
group for both aggregates and 2-5-2s.
The screens should be available within the next few weeks.
Karen Underkofler
DTN 250-2286
|