[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 49.910::kav30

Title:	VAX on VMEbus: KAV30
Notice:	Could have been as fast as 68K but its a VAX!
Moderator:	CSSVMS::KAV30_SUPP

Created:	Thu Apr 18 1991
Last Modified:	Fri Aug 02 1996
Last Successful Update:	Fri Jun 06 1997
Number of topics:	159
Total number of notes:	645

88.0. "How Do you set the baud rate, to 19.2KB?" by PRLUDE::FRANCIS () Mon May 17 1993 20:07

	I have seen the earlier note on setting the baud rate in VAXELN. 
But it didn't say real how. So how do you set the baud rate on the KAV30 to 
19.2KB?

Thanks,

Keith

T.R Title User Personal
Name Date Lines

88.1 How to set terminal line baud rates etc. EICMFG::CUSHNIE Tue May 18 1993 16:01 21

T.R	Title	User	Personal Name	Date	Lines
88.1	How to set terminal line baud rates etc.	EICMFG::CUSHNIE		`Tue May 18 1993 16:01`	21
	Hi Keith, As stated in the previous Note, the console Baud rate can only be set from within your VAXELN system or application software for the KAV30 target hardware. The baud rate can be changed by assigning the serial ports to the Serial device driver, SCNDRIVER, and entering a terminal description for each terminal, together with the required terminal characteristics. The terminal characteristics can also be modified from within user application software using the DDA facility implemented by VAXELN for Direct Device Access to Serial Line devices - See VAXELN Manual Vol 7, Device Driver Guide, Chapter 6 Terminal drivers for full details. Hope this helps. Regards John Cushnie.

Hi Keith,

As stated in the previous Note, the console Baud rate can only be set 
from within your VAXELN system or application software for the KAV30
target hardware.

The baud rate can be changed by assigning the serial ports to 
the Serial device driver, SCNDRIVER, and entering a terminal description 
for each terminal, together with the required terminal characteristics.

The terminal characteristics can also be modified from within user 
application software using the DDA facility implemented by VAXELN 
for Direct Device Access to Serial Line devices - See VAXELN Manual Vol 7,
Device Driver Guide, Chapter 6 Terminal drivers for full details.


Hope this helps.

Regards

John Cushnie.