[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 49.910::kav30

Title:	VAX on VMEbus: KAV30
Notice:	Could have been as fast as 68K but its a VAX!
Moderator:	CSSVMS::KAV30_SUPP

Created:	Thu Apr 18 1991
Last Modified:	Fri Aug 02 1996
Last Successful Update:	Fri Jun 06 1997
Number of topics:	159
Total number of notes:	645

69.0. "what a about a time_interval lower than 10000?" by SOS6::VOUTERS (Philippe VOUTERS, Evry (France)) Fri Oct 09 1992 16:45

    Hello,
    
    I am on a customer problem which manisfest itself by a hang. An Timer
    AST does not unblock a main loop which does a wait_any on a semaphore.
    
    My question is : supposing the customer did not set the time interval
    (Ebuild parameter) to 10000 microsec. but specified another value,
    then can the timer software goes wrong ?
    
    Thank you in advance.
    Best regards,
    Philippe

T.R Title User Personal
Name Date Lines

69.1 HELIX::CROSBIE Fri Oct 09 1992 22:27 8

T.R	Title	User	Personal Name	Date	Lines
69.1		HELIX::CROSBIE		`Fri Oct 09 1992 22:27`	8
	Hi Philippe, The time interval value in EBUILD corresponds to the hardware timer on the rtVAX 300 and not the KAV30 on-board timers that are programmed using the KAV$TIMERS procedure. I believe that changing the time interval parameter does not have any effect on the rtVAX 300. Graham

    Hi Philippe,
    
    The time interval value in EBUILD corresponds to the hardware timer on
    the rtVAX 300 and not the KAV30 on-board timers that are programmed
    using the KAV$TIMERS procedure.  I believe that changing the time
    interval parameter does not have any effect on the rtVAX 300.
    
    Graham