| Title: | VAX on VMEbus: KAV30 |
| Notice: | Could have been as fast as 68K but its a VAX! |
| Moderator: | CSSVMS::KAV30_SUPP |
| Created: | Thu Apr 18 1991 |
| Last Modified: | Fri Aug 02 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 159 |
| Total number of notes: | 645 |
How to connect remote console via ETHERNET MOP protocol?
I am running KAV30 FT 2 Board and try to
$ NCP CONNECT VIA BNA-0 PHYSICAL ADDRESS 08-00-2B-04-4A-58
to a KAV30 board. But the answer is "Target does not respond"
The Board switch settings are as follows: (Booting from Ethernet)
+---------+---------+
| 1 2 3 4 | 5 6 7 8 |
| O O O C | C O O O |
+---------+---------+
The Jumpers are as follows:
VAX HALT 1: Closed
VAX HALT 2: Opened
all others: Opened
Boot Software setting
>>> SET TRIGGER 1
The Trigger with $NCP TRIGGER NODE .... is running well.
but I am missing the >>> if I do the NCP CONNECT
The console runs with the local Terminal on port CON
Many thanks for Input
Matthias Seitz
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 10.1 | not supported | EICMFG::CROSBIE | don't try to outweird me!!! | Tue May 07 1991 14:45 | 4 |
The KAV30 does not support the MOP remote console protocol (other than
the subset of this protocol used to perform remote triggers).
Graham
| |||||