| Title: | VAX MAILGATE for MEMO |
| Moderator: | STKHLM::OLSSON |
| Created: | Sat Feb 25 1989 |
| Last Modified: | Tue May 14 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 216 |
| Total number of notes: | 933 |
Can someone confirm that MRMEMO is the only solution we have at digital
to interface our mailbus to memo?
This may sound silly but after a confused conversation with a IBM
systems programmer type, it was suggested that mrmemo was no longer
needed. My understanding is that if this is true that it is the mrmemo
software on the IBM side.
Bill.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 189.1 | MRMEMO still the simplest alternative, X.400 in the long run | STKOFF::SPERSSON | Pas de probleme | Wed Oct 06 1993 09:33 | 36 |
Hi,
Alternatives are:
1) X.400. Verimation have an X.400-84 MTA (X.25 only). Supports
MEMO<->MR communication but not necessarily MR->MEMO->MTA Relay (not
too sure about this). Obviously you could connect either MRX or MAILBUS
400 this way
2) SNADS via MR/S. I think there are a few installations that have
tried this, I do not know how successful they have been.
Verimation (sellers of MEMO) will try and sell any of these two above
MRMEMO, as they no longer develop their MRMEMO software (which they call
MRGATE, this is usually where the confusion starts). We no longer
develop MRMEMO, for that matter, but it's still passionately supported.
The greatest advantage of MRMEMO above the others is that DDS
registration of your MAILBUS community is not required. With Address
Translation you get "soft" DDS lookups that will use the DDS
information when it's there and use Message Router type adressing if
not. It should also be cheaper than the X.400 solution because
Verimation's X.400 Gateway is expensive.
In the long term I guess an X.400 solution would be the best. Make sure
to find out whether Verimation's software can do MTA relay. If it can't
then obviously there is no way for your Mailbus users to reach an ADMD
over MEMO, and the entire organization would have to use other means to
connect to an ADMD eg MRX!
cheers,
Stefan
| |||||
| 189.2 | Use existing MR/S | STKOFF::SPERSSON | Pas de probleme | Wed Oct 06 1993 09:35 | 9 |
Hmm,
After rereading 188 I realise that you already have an MR/S. It seems
to be the first thing to try.
cheers,
Stefan
| |||||
| 189.3 | Not getting to memo | NEWOA::DICKSON_B | Thu Oct 07 1993 17:20 | 20 | |
They're using MEMO v4.01 MEMO gateway v1.2 and SNADS v1.2.
and they're not using the IBM memo/mr(mrgate) product.
Does our VAX mailgate for MEMO need the IBM mrgate product to
communicate with MEMO.
Am I being forced into your possible solution 2 ie. SNADS and mr/s
Thanks ,
Bill.
| |||||
| 189.4 | MRGATE is required | STKOFF::SPERSSON | Pas de probleme | Thu Oct 07 1993 18:01 | 17 |
Hi Bill,
> Does our VAX mailgate for MEMO need the IBM mrgate product to
> communicate with MEMO.
Yes
> Am I being forced into your possible solution 2 ie. SNADS and mr/s
I wouldn't say "forced", but it seems reasonable to try and use what
they already have.
cheers,
Stefan
| |||||