[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | VAX MAILGATE for MEMO |
|
| Moderator: | STKHLM::OLSSON |
|
| Created: | Sat Feb 25 1989 |
| Last Modified: | Tue May 14 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 216 |
| Total number of notes: | 933 |
162.0. "Binary continued" by BOOZE::SCHOELLHORN (I don't know which title) Fri Feb 05 1993 20:02
PROBLEM:
A user is sending via ALL-IN-1 IOS 2.4 a mail with an attached WINWORD 1.1
document.
The MEMO Gateway fetches the mail and is processing it as shown later on.
After a while a OPCOM message is received
Time: 1993-02-05 19:08:50.09; message from server MRMEMO1:
%CDA-E-OCVNOTFND, output converter not found
SYS$COMMON:[SYSLIB]DDIF$READ_DECBODY7.EXE;1
SYS$COMMON:[SYSLIB]DDIF$WRITE_TEXT.EXE;1
are availble and installed
CDA$ACCESS.exe and DECwindows base system is installed too.
No full function CDA Library is installed.
Set file /watch shows no activity for SYS$COMMON:[SYSLIB]DDIF$WRITE_TEXT.EXE;1
but for other converters which are not installed, e.g. DTIF$WRITE_TEXT.EXE
Regards
Klaus
SW versions:
VAX MAILGATE for MEMO Manager version V2.1
Image Identification Information
image name: "MRMSRV"
image file identification: "V2.1"
link date/time: 1-DEC-1990 10:51:09.84
linker identification: "05-05"
Image Identification Information
image name: "SNALU0SHR"
image file identification: "SNALU0 V2.3-027"
link date/time: 1-MAY-1989 14:46:51.37
linker identification: "05-02"
SYS$COMMON:[SYSLIB]CDA$ACCESS.EXE;1
Image Identification Information
image name: "CDA$ACCESS"
image file identification: "CDA V1.3-900525"
link date/time: 25-MAY-1990 20:05:27.89
linker identification: "05-05"
Directory SYS$COMMON:[SYSLIB]DDIF$READ_DECBODY7.EXE;1
Image Identification Information
image name: "DDIF$READ_DECBODY7"
image file identification: "CDA T1.2-891115"
link date/time: 26-JAN-1990 18:45:33.25
linker identification: "05-05"
DDIF$WRITE_TEXT.EXE;1
Image Identification Information
image name: "DDIF$WRITE_TEXT"
image file identification: "CDA V1.3-900526"
link date/time: 26-MAY-1990 11:21:35.31
linker identification: "05-05"
MRMAN V3.2 (BL9.07)
VAX/VMS V5.4-2
THIS IS MRMEMO1.LOG WITH MRMEMO$LOGMASK = FF
----------------------------------------------
$!
$! sylogin.com
$!
$ IF F$MODE() .NES. "INTERACTIVE" THEN EXIT
$! M r m e m o . C o m
$!
$ set noon
$ set verify
$!
$! eco18 start of fix
$!
$ prcnam = f$getjpi (0,"PRCNAM")
$ srvnum = f$extract (14,1,prcnam)
$ if f$search("SRV1.dir") .eqs. "" then goto nosrvdir
$ defdir = "[.SRV1]"
$ set default [.SRV1]
$ nosrvdir:
$!
$! eco18 end of fix
$!
$ define tt nl:
$ run/nodebug sys$system:mrmsrv
Time: 1993-02-05 19:08:09.27; message from server MRMEMO1:
%MRMEMO-I-DECNETMSG, DECnet notification, message number is: 50
Time: 1993-02-05 19:08:09.62; message from server MRMEMO1:
%MRMEMO-I-FSM, starting, connecting to MR and MEMO Gateway after clock tick
Time: 1993-02-05 19:08:10.10; message from server MRMEMO1:
%MRMEMO-I-FSM, starting, connecting to MR and MEMO Gateway after start request from MRMMAN
Time: 1993-02-05 19:08:10.71; message from server MRMEMO1:
%MRMEMO-I-NEWACCOUNT, opening new accounting file: R3FUBA$DIA0:[MRMEMO]MRMEMOACC1.DAT;917
Time: 1993-02-05 19:08:18.17; message from server MRMEMO1:
%MRMEMO-I-CONNECTION, connection established to Message Router:
-SYSTEM-S-SUCCESS, Successful completion
5-FEB-1993 19:08:18.62: SNA event CONNECT, substate: 0050, info: 00
5-FEB-1993 19:08:18.65: SNA event BINDOK, substate: 0050, info: 00
Time: 1993-02-05 19:08:18.66; message from server MRMEMO1:
%MRMEMO-I-CONNECTION, connection established to MEMO:
-SNALU0-S-NORMAL, normal successful completion
5-FEB-1993 19:08:18.78: SNA event RCVMSG, substate: 0070, info: 00
5-FEB-1993 19:08:18.91: SNA event BIDTST, substate: 0070, info: A0
Time: 1993-02-05 19:08:18.92; message from server MRMEMO1:
%MRMEMO-I-FSM, synchronising MEMO Gateway link after SDT request from MEMO
5-FEB-1993 19:08:19.23: SNA event POSRSP, substate: 0070, info: A0
5-FEB-1993 19:08:19.28: SNA event RCVMSG, substate: 0470, info: 00
Time: 1993-02-05 19:08:19.29; message from server MRMEMO1:
%MRMEMO-I-FSM, idle, connected to MR and MEMO after message indicated in MR mailbox
5-FEB-1993 19:08:19.98: SNA event BIDTST, substate: 0470, info: C8
5-FEB-1993 19:08:20.02: SNA event NEGRSP, substate: 1470, info: C8
Time: 1993-02-05 19:08:45.22; message from server MRMEMO1:
%MRMEMO-I-DECNETMSG, DECnet notification, message number is: 48
Time: 1993-02-05 19:08:50.09; message from server MRMEMO1:
%CDA-E-OCVNOTFND, output converter not found
%MRMEMO-W-TRACE, traceback forced from the Server Handler
-MRMEMO-I-FSM, idle, connected to MR and MEMO after message indicated in MR mailbox
-MRMEMO-I-RING, ring: ' 4A 4D 52 19.', substates: 00001470
%TRACE-W-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
SRVLOG SRV$LOG_HANDLER 3943 000001C9 001E379D
----- above condition handler called with exception 01B48A92:
%CDA-E-OCVNOTFND, output converter not found
----- end of exception message
SRVMRD SRV$MRD_DISASS_TEXT 6314 00000422 001ED903
SRVMRD SRV$MRD_DISASS_BODY 11056 00000031 001F1F21
SRVMRD SRV$MRD_DISASS_FORW_BODY 10895 00000103 001F1D14
SRVMRD SRV$MRD_DISASS_BODY 11062 00000042 001F1F32
SRVMRD SRV$MRD_PRSNT_BODYPART 9524 00000033 001F0C1A
SRVMRD SRV$MRD_DISASS_FWDIPMSG_BODY 11014 0000008F 001F1EC3
SRVMRD SRV$MRD_DISASS_BODY 11072 00000066 001F1F56
SRVMRD SRV$MRD_DISASS 11550 000005E2 001F2575
SRVACT SRV$ACT_M 4710 0000003D 001EB1A9
SRVDSP SRV$DSP_FSM 3310 00000115 001E3299
SRVMMO SRV$MMO_ONE_LIFE 4376 000001EF 001E03BF
SRVMMO SRV$MMO_MAIN 4208 00000017 001E01C3
00239BAE 00239BAE
KOTERM KOTERM 804 00000039 002375A2
00239B89 00239B89
KODOC KODOC 1768 00000097 002347E4
00239B89 00239B89
0026593E 0026593E
ADA$ELAB_DDS ADA$ELAB_DDS 0000000E 001C0C0E
00239B89 00239B89
5-FEB-1993 19:09:08.60: SNA event DISCON, substate: 1460, info: 00
Time: 1993-02-05 19:09:08.61; message from server MRMEMO1:
%MRMEMO-I-FSM, starting, connecting to MR and MEMO Gateway after clock tick
Time: 1993-02-05 19:09:19.92; message from server MRMEMO1:
%MRMEMO-I-CONNECTION, connection established to Message Router:
-SYSTEM-S-SUCCESS, Successful completion
5-FEB-1993 19:09:20.41: SNA event CONNECT, substate: 0010, info: 00
5-FEB-1993 19:09:20.45: SNA event BINDOK, substate: 0010, info: 00
Time: 1993-02-05 19:09:20.46; message from server MRMEMO1:
%MRMEMO-I-CONNECTION, connection established to MEMO:
-SNALU0-S-NORMAL, normal successful completion
5-FEB-1993 19:09:20.56: SNA event RCVMSG, substate: 0030, info: 00
5-FEB-1993 19:09:20.75: SNA event BIDTST, substate: 0030, info: A0
Time: 1993-02-05 19:09:20.77; message from server MRMEMO1:
%MRMEMO-I-FSM, synchronising MEMO Gateway link after SDT request from MEMO
5-FEB-1993 19:09:21.06: SNA event POSRSP, substate: 0030, info: A0
5-FEB-1993 19:09:21.10: SNA event RCVMSG, substate: 0430, info: 00
Time: 1993-02-05 19:09:21.12; message from server MRMEMO1:
%MRMEMO-I-FSM, idle, connected to MR and MEMO after message indicated in MR mailbox
%ADA-F-PROGRAM_ERROR, PROGRAM_ERROR
-ADA-F-RECNOTPOS, Program is erroneous, error recovery by exception handling is not possible
-ADA-F-IMAFOREXI, The image was forced to exit
-ADA-F-EXCDUREXC, An exception occurred in the VAX Ada run-time library while handling an exception
5-FEB-1993 19:09:35.24: SNA event DISCON, substate: 0420, info: 00
%MRMEMO-I-BYE, VAX MAILGATE for MEMO Server Exit
%ADA-F-PROGRAM_ERROR, PROGRAM_ERROR
$ logout
MRMEMO job terminated at 5-FEB-1993 19:09:41.53
Accounting information:
Buffered I/O count: 312 Peak working set size: 3284
Direct I/O count: 282 Peak page file size: 15775
Page faults: 3181 Mounted volumes: 0
Charged CPU time: 0 00:00:34.43 Elapsed time: 0 00:01:42.67
This is MRMEMO1.LOG with $ SET WATCH/CLASS=(ALL,NODUMP) FILE
MRMEMO$LOGMASK = UNDEFINED
$!
$! sylogin.com
$!
$ IF F$MODE() .NES. "INTERACTIVE" THEN EXIT
$! M r m e m o . C o m
$!
$ set noon
$ set verify
$! FOR FURTHER INVESTIGATION SET
$ SET WATCH/CLASS=(ALL,NODUMP) FILE
$!
$!
$! eco18 start of fix
$!
$ prcnam = f$getjpi (0,"PRCNAM")
$ srvnum = f$extract (14,1,prcnam)
$ if f$search("SRV1.dir") .eqs. "" then goto nosrvdir
$ defdir = "[.SRV1]"
$ set default [.SRV1]
$ nosrvdir:
$!
$! eco18 end of fix
$!
$ define tt nl:
$ run/nodebug sys$system:mrmsrv
%XQP-I-FUNCTION, Read only directory access (464,6,0)
%XQP-I-FUNCTION, Directory scan for: MRMSRV.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (621,1344,0)
%XQP-I-FUNCTION, Directory scan for: MRMSRV.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMSRV.EXE;1 (3622,368,0)
%XQP-I-FUNCTION, Access MRMSRV.EXE;1 (3622,368,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (462,6,0)
%XQP-I-FUNCTION, Directory scan for: SYSLIB.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (630,296,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: FDLSHR.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: Access mode FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: Journal flags FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: RU active FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: Statistics block FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: Record attributes FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics FDLSHR.EXE;1 (1468,110,0)
%XQP-I-FUNCTION, Access FDLSHR.EXE;1 (1468,110,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (10,1,0)
%XQP-I-FUNCTION, Directory scan for: SYSLIB.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (468,7,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: MRAPPSHAR.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMODEF1.TBL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMODEF1.TBL;2 (1995,928,0)
%XQP-I-FUNCTION, Access MRMEMODEF1.TBL;2 (1995,928,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1995,928,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMOACC1.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: File protection ...................................................................................... (3761,303,0)
%XQP-I-FUNCTION, Write attributes: File access level ...................................................................................... (3761,303,0)
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3761,303,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3761,303,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3761,303,0) Status: 00000001
Time: 1993-02-05 18:54:49.51; message from server MRMEMO1:
%MRMEMO-I-NEWACCOUNT, opening new accounting file: R3FUBA$DIA0:[MRMEMO]MRMEMOACC1.DAT;916
%XQP-I-FUNCTION, Modify MRMEMOACC1.DAT;916 (3761,303,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMOACC1.DAT;916 (3761,303,0)
%XQP-I-FUNCTION, Modify MRMEMOACC1.DAT;916 (3761,303,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DDS$SHAR.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DDS$SHAR.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$SHAR.EXE;3 (2074,329,0)
%XQP-I-FUNCTION, Access DDS$SHAR.EXE;3 (2074,329,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (2074,329,0) Reads: 2, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (4,4,0)
%XQP-I-FUNCTION, Directory scan for: MB$.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (810,5,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (810,5,0)
%XQP-I-FUNCTION, Directory scan for: DDS.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (811,2,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (811,2,0)
%XQP-I-FUNCTION, Directory scan for: WRK.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup DDS.DIR;1 (670,9,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS_CONFIG.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Access DDS_CONFIG.DAT;272 (3597,321,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3597,321,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS$_STOP_55.DAT;0, Status: 00000000
%XQP-I-FUNCTION, Lookup (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS_CONFIG.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Access DDS_CONFIG.DAT;272 (3597,321,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3597,321,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (811,2,0)
%XQP-I-FUNCTION, Directory scan for: DB.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (812,2,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$PERM_DB.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Access DDS$PERM_DB.DAT;1216 (3487,33,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$CACHE_DB.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Access DDS$CACHE_DB.DAT;1215 (3221,349,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$PERM_AIF.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Access DDS$PERM_AIF.DAT;1215 (2625,1557,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$CACHE_AIF.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Access DDS$CACHE_AIF.DAT;1215 (3339,163,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS$LOG.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Create-if Access DDS$LOG.DAT;1 (2699,676,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS$_STOP_55.DAT;0, Status: 00000000
%XQP-I-FUNCTION, Lookup (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (462,6,0)
%XQP-I-FUNCTION, Directory scan for: SYSMSG.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (649,554,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (649,554,0)
%XQP-I-FUNCTION, Directory scan for: ADAMSG.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: Access mode ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: Journal flags ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: RU active ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: Statistics block ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: Record attributes ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics ADAMSG.EXE;1 (1610,354,0)
%XQP-I-FUNCTION, Access ADAMSG.EXE;1 (1610,354,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (10,1,0)
%XQP-I-FUNCTION, Directory scan for: SYSMSG.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (470,7,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (470,7,0)
%XQP-I-FUNCTION, Directory scan for: MRAPPMSG.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (649,554,0)
%XQP-I-FUNCTION, Directory scan for: MRAPPMSG.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: RU active MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRAPPMSG.EXE;3 (1602,77,0)
%XQP-I-FUNCTION, Access MRAPPMSG.EXE;3 (1602,77,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: File header MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Access MRMEMO.DIR;1 (1025,41,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1025,41,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: .;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-ENVELOPE.NBS;1 (3882,206,0)
%XQP-I-FUNCTION, Lookup MRMEMO1-ENVELOPE.NBS;1 (3882,206,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-ENVELOPE.NBS;1, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1-ENVELOPE.NBS;1 (3882,206,0) Status: 00000001
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: File header MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Access MRMEMO.DIR;1 (1025,41,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1025,41,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: .;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-CONTENTS.NBS;1 (3705,190,0)
%XQP-I-FUNCTION, Lookup MRMEMO1-CONTENTS.NBS;1 (3705,190,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-CONTENTS.NBS;1, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1-CONTENTS.NBS;1 (3705,190,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-CONTENTS.NBS;0, Status: 00000000
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3705,191,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3705,191,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3705,191,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-ENVELOPE.NBS;0, Status: 00000000
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3762,14,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3762,14,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3762,14,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1-ENVELOPE.NBS;1 (3762,14,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1-CONTENTS.NBS;1 (3705,191,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Deaccess (3762,14,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Deaccess (3705,191,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-ENVELOPE.NBS;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Access MRMEMO1-ENVELOPE.NBS;1 (3762,14,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3762,14,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-CONTENTS.NBS;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Access MRMEMO1-CONTENTS.NBS;1 (3705,191,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$OUTQUE.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Access DDS$OUTQUE.DAT;1224 (2397,1210,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DDS$CALLOUT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DDS$CALLOUT.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$CALLOUT.EXE;3 (883,17,0)
%XQP-I-FUNCTION, Access DDS$CALLOUT.EXE;3 (883,17,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (883,17,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$INQUE.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Access DDS$INQUE.DAT;1215 (3534,484,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: File protection ...................................................................................... (3832,256,0)
%XQP-I-FUNCTION, Write attributes: File access level ...................................................................................... (3832,256,0)
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3832,256,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3832,256,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3832,256,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1NBS.WPL;206 (3832,256,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Write attributes: File protection MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Deaccess (3832,256,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Access MRMEMO1NBS.WPL;206 (3832,256,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: SRV1.DIR;1, Status: 00000001
%XQP-I-FUNCTION, Lookup (317,61,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;0, Status: 00000000
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3838,19,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3838,19,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Modify DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Modify DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3832,256,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Modify DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Deaccess (3838,19,0) Reads: 0, Writes: 7, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: Access mode DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: RU active DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Access DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3858,30,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3858,30,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3858,30,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1ASC.TXT;2 (3858,30,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3838,19,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Deaccess (3858,30,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0)
%XQP-I-FUNCTION, Lookup DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;1, Status: 00000001
%XQP-I-FUNCTION, Delete DCF_WPS_ASCII_TMP.WPL;1 (3838,19,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1NBS.WPL;206 (3832,256,0)
%XQP-I-FUNCTION, Lookup MRMEMO1NBS.WPL;206 (3832,256,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;206, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1NBS.WPL;206 (3832,256,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Read only uic MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: File protection MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: File access level MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Create-if Access MRMEMO1ASC.TXT;2 (3858,30,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Write attributes: File protection MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Write attributes: Owner UIC MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Deaccess (3858,30,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1ASC.TXT;2 (3858,30,0)
%XQP-I-FUNCTION, Lookup MRMEMO1ASC.TXT;2 (3858,30,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;2, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1ASC.TXT;2 (3858,30,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.DB7;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3832,257,0)
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3832,257,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3832,257,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3832,257,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1NBS.DB7;98 (3832,257,0)
%XQP-I-FUNCTION, Deaccess (3832,257,0) Reads: 0, Writes: 4, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: CDA$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: CDA$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSLIBSHR.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSLIBSHR.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Journal flags XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: RU active XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Statistics block XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Record attributes XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Access XDPS$DPSLIBSHR.EXE;1 (1539,3,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSCLIENTSHR.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSCLIENTSHR.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Journal flags XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: RU active XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Statistics block XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Record attributes XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Access XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1538,3,0) Reads: 2, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DTIF$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DTIF$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DOTS$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DOTS$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
Time: 1993-02-05 18:55:32.39; message from server MRMEMO1:
%CDA-E-OCVNOTFND, output converter not found
%MRMEMO-W-TRACE, traceback forced from the Server Handler
-MRMEMO-I-FSM, idle, connected to MR and MEMO after message indicated in MR mailbox
-MRMEMO-I-RING, ring: ' 4A 4D 52 19.', substates: 00000470
%XQP-I-FUNCTION, Read only directory access (470,7,0)
%XQP-I-FUNCTION, Directory scan for: DECW$TRANSPORTMSG.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (649,554,0)
%XQP-I-FUNCTION, Directory scan for: DECW$TRANSPORTMSG.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: Access mode DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: RU active DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DECW$TRANSPORTMSG.EXE;1 (1621,767,0)
%XQP-I-FUNCTION, Access DECW$TRANSPORTMSG.EXE;1 (1621,767,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (470,7,0)
%XQP-I-FUNCTION, Directory scan for: DECW$XLIBMSG.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (649,554,0)
%XQP-I-FUNCTION, Directory scan for: DECW$XLIBMSG.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: Access mode DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: RU active DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DECW$XLIBMSG.EXE;1 (1625,279,0)
%XQP-I-FUNCTION, Access DECW$XLIBMSG.EXE;1 (1625,279,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (470,7,0)
%XQP-I-FUNCTION, Directory scan for: DECW$DWTMSG.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (649,554,0)
%XQP-I-FUNCTION, Directory scan for: DECW$DWTMSG.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: Access mode DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: RU active DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DECW$DWTMSG.EXE;1 (1620,4,0)
%XQP-I-FUNCTION, Access DECW$DWTMSG.EXE;1 (1620,4,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (649,554,0)
%XQP-I-FUNCTION, Directory scan for: DBGTBKMSG.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: Access mode DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: RU active DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DBGTBKMSG.EXE;1 (1614,141,0)
%XQP-I-FUNCTION, Access DBGTBKMSG.EXE;1 (1614,141,0) Status: 00000001
%TRACE-W-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
SRVLOG SRV$LOG_HANDLER 3943 000001C9 001E379D
----- above condition handler called with exception 01B48A92:
%CDA-E-OCVNOTFND, output converter not found
----- end of exception message
SRVMRD SRV$MRD_DISASS_TEXT 6314 00000422 001ED903
SRVMRD SRV$MRD_DISASS_BODY 11056 00000031 001F1F21
SRVMRD SRV$MRD_DISASS_FORW_BODY 10895 00000103 001F1D14
SRVMRD SRV$MRD_DISASS_BODY 11062 00000042 001F1F32
SRVMRD SRV$MRD_PRSNT_BODYPART 9524 00000033 001F0C1A
SRVMRD SRV$MRD_DISASS_FWDIPMSG_BODY 11014 0000008F 001F1EC3
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1.LOG;2 (3753,273,0)
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
SRVMRD SRV$MRD_DISASS_BODY 11072 00000066 001F1F56
SRVMRD SRV$MRD_DISASS 11550 000005E2 001F2575
SRVACT SRV$ACT_M 4710 0000003D 001EB1A9
SRVDSP SRV$DSP_FSM 3310 00000115 001E3299
SRVMMO SRV$MMO_ONE_LIFE 4376 000001EF 001E03BF
SRVMMO SRV$MMO_MAIN 4208 00000017 001E01C3
00239BAE 00239BAE
KOTERM KOTERM 804 00000039 002375A2
00239B89 00239B89
KODOC KODOC 1768 00000097 002347E4
00239B89 00239B89
0026593E 0026593E
ADA$ELAB_DDS ADA$ELAB_DDS 0000000E 001C0C0E
00239B89 00239B89
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Deaccess (3487,33,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Deaccess (3221,349,0) Reads: 2, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Deaccess (3534,484,0) Reads: 7, Writes: 13, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Deaccess (2397,1210,0) Reads: 4, Writes: 19, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Deaccess (2625,1557,0) Reads: 2, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Deaccess (3339,163,0) Reads: 2, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Deaccess (2699,676,0) Reads: 0, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS_CONFIG.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Access DDS_CONFIG.DAT;272 (3597,321,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3597,321,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS$_STOP_55.DAT;0, Status: 00000000
%XQP-I-FUNCTION, Lookup (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS_CONFIG.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS_CONFIG.DAT;272 (3597,321,0)
%XQP-I-FUNCTION, Access DDS_CONFIG.DAT;272 (3597,321,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3597,321,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$PERM_DB.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$PERM_DB.DAT;1216 (3487,33,0)
%XQP-I-FUNCTION, Access DDS$PERM_DB.DAT;1216 (3487,33,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$CACHE_DB.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$CACHE_DB.DAT;1215 (3221,349,0)
%XQP-I-FUNCTION, Access DDS$CACHE_DB.DAT;1215 (3221,349,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$PERM_AIF.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$PERM_AIF.DAT;1215 (2625,1557,0)
%XQP-I-FUNCTION, Access DDS$PERM_AIF.DAT;1215 (2625,1557,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$CACHE_AIF.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$CACHE_AIF.DAT;1215 (3339,163,0)
%XQP-I-FUNCTION, Access DDS$CACHE_AIF.DAT;1215 (3339,163,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS$LOG.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$LOG.DAT;1 (2699,676,0)
%XQP-I-FUNCTION, Create-if Access DDS$LOG.DAT;1 (2699,676,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (670,9,0)
%XQP-I-FUNCTION, Directory scan for: DDS$_STOP_55.DAT;0, Status: 00000000
%XQP-I-FUNCTION, Lookup (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: File header MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Access MRMEMO.DIR;1 (1025,41,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1025,41,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: .;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-ENVELOPE.NBS;1 (3762,14,0)
%XQP-I-FUNCTION, Lookup MRMEMO1-ENVELOPE.NBS;1 (3762,14,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-ENVELOPE.NBS;1, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1-ENVELOPE.NBS;1 (3762,14,0) Status: 00000001
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Read attributes: File header MRMEMO.DIR;1 (1025,41,0)
%XQP-I-FUNCTION, Access MRMEMO.DIR;1 (1025,41,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1025,41,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: .;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-CONTENTS.NBS;1 (3705,191,0)
%XQP-I-FUNCTION, Lookup MRMEMO1-CONTENTS.NBS;1 (3705,191,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-CONTENTS.NBS;1, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1-CONTENTS.NBS;1 (3705,191,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-CONTENTS.NBS;0, Status: 00000000
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3762,15,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3762,15,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3762,15,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-ENVELOPE.NBS;0, Status: 00000000
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3872,500,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3872,500,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3872,500,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1-ENVELOPE.NBS;1 (3872,500,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1-CONTENTS.NBS;1 (3762,15,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Deaccess (3872,500,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Deaccess (3762,15,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-ENVELOPE.NBS;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1-ENVELOPE.NBS;1 (3872,500,0)
%XQP-I-FUNCTION, Access MRMEMO1-ENVELOPE.NBS;1 (3872,500,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3872,500,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1-CONTENTS.NBS;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1-CONTENTS.NBS;1 (3762,15,0)
%XQP-I-FUNCTION, Access MRMEMO1-CONTENTS.NBS;1 (3762,15,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$OUTQUE.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$OUTQUE.DAT;1224 (2397,1210,0)
%XQP-I-FUNCTION, Access DDS$OUTQUE.DAT;1224 (2397,1210,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (812,2,0)
%XQP-I-FUNCTION, Directory scan for: DDS$INQUE.DAT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Access mode DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: RU active DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DDS$INQUE.DAT;1215 (3534,484,0)
%XQP-I-FUNCTION, Access DDS$INQUE.DAT;1215 (3534,484,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Owner UIC ...................................................................................... (3882,209,0)
%XQP-I-FUNCTION, Write attributes: File protection ...................................................................................... (3882,209,0)
%XQP-I-FUNCTION, Write attributes: File access level ...................................................................................... (3882,209,0)
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3882,209,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3882,209,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3882,209,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1NBS.WPL;206 (3882,209,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Write attributes: File protection MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Write attributes: Owner UIC MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Deaccess (3882,209,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: Access mode MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Access MRMEMO1NBS.WPL;206 (3882,209,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;0, Status: 00000000
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3895,156,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3895,156,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Modify DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Modify DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3882,209,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Modify DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Deaccess (3895,156,0) Reads: 0, Writes: 7, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: Access mode DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: Journal flags DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: RU active DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: Statistics block DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: Record attributes DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Access DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3899,94,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3899,94,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3899,94,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1ASC.TXT;2 (3899,94,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (3895,156,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Deaccess (3899,94,0) Reads: 0, Writes: 2, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0)
%XQP-I-FUNCTION, Lookup DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: DCF_WPS_ASCII_TMP.WPL;1, Status: 00000001
%XQP-I-FUNCTION, Delete DCF_WPS_ASCII_TMP.WPL;1 (3895,156,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1NBS.WPL;206 (3882,209,0)
%XQP-I-FUNCTION, Lookup MRMEMO1NBS.WPL;206 (3882,209,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.WPL;206, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1NBS.WPL;206 (3882,209,0) Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Owner UIC MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: File protection MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: File access level MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: RU active MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: Statistics block MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: Record attributes MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Create-if Access MRMEMO1ASC.TXT;2 (3899,94,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Write attributes: File protection MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Write attributes: Owner UIC MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Deaccess (3899,94,0) Reads: 1, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Journal flags MRMEMO1ASC.TXT;2 (3899,94,0)
%XQP-I-FUNCTION, Lookup MRMEMO1ASC.TXT;2 (3899,94,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (1025,41,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1ASC.TXT;2, Status: 00000001
%XQP-I-FUNCTION, Delete MRMEMO1ASC.TXT;2 (3899,94,0) Status: 00000001
%XQP-I-FUNCTION, Read/write directory access (317,61,0)
%XQP-I-FUNCTION, Directory scan for: MRMEMO1NBS.DB7;0, Status: 00000001
%XQP-I-FUNCTION, Create new directory entry
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3882,210,0)
%XQP-I-FUNCTION, Write attributes: Record attributes ...................................................................................... (3882,210,0)
%XQP-I-FUNCTION, Write attributes: User file characteristics ...................................................................................... (3882,210,0)
%XQP-I-FUNCTION, Create ...................................................................................... (3882,210,0) Status: 00000001
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1NBS.DB7;99 (3882,210,0)
%XQP-I-FUNCTION, Deaccess (3882,210,0) Reads: 0, Writes: 4, Status: 00000001
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: CDA$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: CDA$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSLIBSHR.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSLIBSHR.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Journal flags XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: RU active XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Statistics block XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: Record attributes XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics XDPS$DPSLIBSHR.EXE;1 (1539,3,0)
%XQP-I-FUNCTION, Access XDPS$DPSLIBSHR.EXE;1 (1539,3,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSCLIENTSHR.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: XDPS$DPSCLIENTSHR.EXE;0, Status: 00000001
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Access mode XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Journal flags XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: RU active XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Statistics block XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Find ACE by type XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: Record attributes XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Read attributes: User file characteristics XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0)
%XQP-I-FUNCTION, Access XDPS$DPSCLIENTSHR.EXE;1 (1538,3,0) Status: 00000001
%XQP-I-FUNCTION, Deaccess (1538,3,0) Reads: 2, Writes: 0, Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DTIF$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DTIF$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DOTS$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DOTS$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
Time: 1993-02-05 18:56:32.59; message from server MRMEMO1:
%CDA-E-OCVNOTFND, output converter not found
%MRMEMO-W-TRACE, traceback forced from the Server Handler
-MRMEMO-I-FSM, idle, connected to MR and MEMO after message indicated in MR mailbox
-MRMEMO-I-RING, ring: ' 4A 4D 52 19 ][ 4A 52 19.', substates: 00000430
%TRACE-W-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
SRVLOG SRV$LOG_HANDLER 3943 000001C9 001E379D
----- above condition handler called with exception 01B48A92:
%CDA-E-OCVNOTFND, output converter not found
----- end of exception message
SRVMRD SRV$MRD_DISASS_TEXT 6314 00000422 001ED903
SRVMRD SRV$MRD_DISASS_BODY 11056 00000031 001F1F21
SRVMRD SRV$MRD_DISASS_FORW_BODY 10895 00000103 001F1D14
SRVMRD SRV$MRD_DISASS_BODY 11062 00000042 001F1F32
SRVMRD SRV$MRD_PRSNT_BODYPART 9524 00000033 001F0C1A
SRVMRD SRV$MRD_DISASS_FWDIPMSG_BODY 11014 0000008F 001F1EC3
SRVMRD SRV$MRD_DISASS_BODY 11072 00000066 001F1F56
SRVMRD SRV$MRD_DISASS 11550 000005E2 001F2575
SRVACT SRV$ACT_M 4710 0000003D 001EB1A9
SRVDSP SRV$DSP_FSM 3310 00000115 001E3299
SRVMMO SRV$MMO_ONE_LIFE 4376 000001EF 001E03BF
SRVMMO SRV$MMO_MAIN 4208 00000017 001E01C3
%XQP-I-FUNCTION, Write attributes: Record attributes MRMEMO1.LOG;2 (3753,273,0)
%XQP-I-FUNCTION, Modify MRMEMO1.LOG;2 (3753,273,0) Status: 00000001
00239BAE 00239BAE
KOTERM KOTERM 804 00000039 002375A2
00239B89 00239B89
KODOC KODOC 1768 00000097 002347E4
00239B89 00239B89
0026593E 0026593E
ADA$ELAB_DDS ADA$ELAB_DDS 0000000E 001C0C0E
00239B89 00239B89
REM: full set of logfiles/documents is on booze:: (49.207)
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 162.1 | NBS dump required | STKOFF::SPERSSON | Pas de probleme | Tue Feb 09 1993 20:42 | 52 |
|
Hi Klaus,
Well, this is news to me, but it seems like the CDA conversion routine
tries to access these files:
SYS$LIBRARY:CDA$WRITE_TEXT.EXE
SYS$LIBRARY:DTIF$WRITE_TEXT.EXE
SYS$LIBRARY:DOTS$WRITE_TEXT.EXE
It is clear from the status of the attempted access
(00000910 => %SYSTEM-W-NOSUCHFILE, no such file)
that these files do not exist on your system. I'm not a CDA expert, and
I don't even know if these files are supposed to exist and if so which
kit they are a part of. I also don't know why the CDA conversion
routine tries to access them.
I have been unable to reproduce the error. Do you think you can provide
an MRNBSDMP dump of the contents file as below.
$ RUN MB$TOOLS:MRNBSDMP
NBS message dump utility S3.2-220
File to dump: MRMEMO$DIR:MRMEMO1-CONTENTS.NBS
Output file: MRMEMO$DIR:MRMEMO1-CONTENTS.TXT
Failing that, could you describe exactly how the message is created and
sent from ALL-IN-1 (presumably it has been sent to the ALL-IN-1 user
who then forwards it)
%XQP-I-FUNCTION, Directory scan for: CDA$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: CDA$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DTIF$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DTIF$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (468,7,0)
%XQP-I-FUNCTION, Directory scan for: DOTS$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
%XQP-I-FUNCTION, Read only directory access (630,296,0)
%XQP-I-FUNCTION, Directory scan for: DOTS$WRITE_TEXT.EXE;0, Status: 00000000
%XQP-I-FUNCTION, Access (0,0,0) Status: 00000910
|
| 162.2 | NBS dump follows | BOOZE::SCHOELLHORN | I don't know which title | Fri Feb 12 1993 14:09 | 349 |
| Hello ,
customers problem is a correct error handling, he can't monitor
the gateway process whether one of his many users has sent a ALL-IN-1
document with an attached WINWORD document ( DSAB foreign).
There is no CDA Library installed and he doesn't want to install (buy) it.
The problem occurs, when this kind of attachment is sent, the gateway loops
and crashes finally. Any other messages in the MEMO MR mailbox queue are
hanging.
He doesn't want a conversion, he wants a running gateway, which is not crashing
when fetching such a binary document from MR.
I need a definite answer for customer information or further escalation.
Regards
Klaus
Ok now the NBS dump:
MB$TOOLS:MRNBSDMP
NBS message dump utility V3.2-BL9.07
File to dump: MRMEMO$DIR:MRMEMO1-CONTENTS.NBS
Output file: MRMEMO$DIR:MRMEMO1-CONTENTS.TXT
type MRMEMO$DIR:MRMEMO1-CONTENTS.TXT
%%%%%%%%%%% OPCOM 12-FEB-1993 11:26:31.52 %%%%%%%%%%%
Message from user MRMEMO
Time: 1993-02-12 11:26:31.51; message from server MRMEMO1:
%CDA-E-OCVNOTFND, output converter not found
File R3FUBA$DIA0:[MRMEMO]MRMEMO1-CONTENTS.NBS;1 contains ****** bytes.
000003 1 MSG[V2CONT] Len=******
00000C 2 FIELD[A1_KLUDGE] Len=000006
00000E 3 INT Len=000004
%00000061
000019 2 FIELD[MCLS] Len=000032
00001B 3 ASCII Len=000030
"ALL-IN-1/DEUTSCH V2.4 SDC, 20. August 1990 - AAA
000052 2 FIELD[FROM] Len=0000B4
000059 3 ENT[NAME] Len=0000AD
00005F 4 SEQ Len=000029
000066 5 ATTR[ORGANTN] Len=000022
000068 6 ASCII Len=000020
"ZI-NNS
00008E 4 SEQ Len=000051
000095 5 ATTR[TEL] Len=000022
000097 6 ASCII Len=000020
"D 030-468-4892
0000BE 5 ATTR[ROUTE] Len=000012
0000C4 6 SEQ Len=00000C
0000C6 7 ASCII Len=000006
"WDVV04
0000CE 7 ASCII Len=000002
"A1
0000D7 5 ATTR[USERID] Len=000008
0000D9 6 ASCII Len=000006
"NNS_FB
0000E6 4 ATTR[FREEFORM] Len=000020
0000E8 5 ASCII Len=00001E
"Frank Balkow
00010F 2 FIELD[CRTDATE] Len=000014
000111 3 DATE Len=000012
000113 4 ASCII Len=000010
"1993021211200000
00012A 2 FIELD[PDATE] Len=000014
00012C 3 DATE Len=000012
00012E 4 ASCII Len=000010
"1993021211210000
000145 2 FIELD[PREC] Len=000006
000147 3 INT Len=000004
%00000000
000152 2 VEND[TYPE] Len=000011
000154 3 ASCII Len=00000F
"MAIL
00016A 2 VEND[FORMAT] Len=000011
00016C 3 ASCII Len=00000F
"
000182 2 FIELD[SUBJ] Len=00001A
000184 3 ASCII Len=000018
"WinWord Testschriftst�ck
0001A3 2 FIELD[TO] Len=000059
0001A9 3 SEQ Len=000053
0001B0 4 ENT[NAME] Len=00004C
0001B6 5 SEQ Len=000000
0001BC 5 SEQ Len=000025
0001C3 6 ATTR[ROUTE] Len=00000C
0001C9 7 SEQ Len=000006
0001CB 8 ASCII Len=000004
"MEMO
0001D6 6 ATTR[USERID] Len=00000B
0001D8 7 ASCII Len=000009
"BLN1.NSFB
0001E8 5 ATTR[FREEFORM] Len=000014
0001EA 6 ASCII Len=000012
"Testaccount Balkow
000203 2 FIELD[ATTACH] Len=00014B
00020A 3 MSG[WPSPLUS] Len=000144
000211 4 VEND[IMAGE] Len=00013D
000214 5 VEND[IMAGTY] Len=000011
000216 6 ASCII Len=00000F
"
00022C 5 VEND[IMAGPROC] Len=00000D
000232 6 ASCII Len=000007
"WPSPLUS
000240 5 VEND[IMAGDAT] Len=00010E
000243 6 BITS[%00] Len=000052
%385F5F5F205F205F295F5F5F255F25
%205F5F2B5F205F5F5F205F5F5F205F
%5F5F5F5F245F255F5F5F5F5F5F5F5F
%5F5F5F5F5F5F5F205F555F5F000000
%010008017A00020106020201200A01
%01000100000001
000298 6 BITS[%00] Len=000004
%00010003
0002A0 6 BITS[%00] Len=00009A
%010046000000000046000000000044
%000000430000000043000000004300
%000000430000000043000000004300
%000000430000000043000000004300
%000000430000000043000000004300
%004C00430000000045440000004300
%000000430000000043000000004300
%000000430000000043000000004300
%000000430000000043000000004300
%00000043000000004300004C004300
%00000045
00033D 6 BITS[%00] Len=000011
%290001000100020000000000000000
%0000
000355 2 FIELD[ATTACH] Len=0008C4
00035C 3 MSG[V2CONT] Len=0008BD
000365 4 FIELD[A1_KLUDGE] Len=000006
000367 5 INT Len=000004
%00000069
000374 4 FIELD[CRTDATE] Len=000014
000376 5 DATE Len=000012
000378 6 ASCII Len=000010
"1993020313400000
00038F 4 FIELD[PDATE] Len=000014
000391 5 DATE Len=000012
000393 6 ASCII Len=000010
"1993021200000000
0003AA 4 VEND[TYPE] Len=000011
0003AC 5 ASCII Len=00000F
"DOCUMENT
0003C2 4 VEND[FORMAT] Len=000011
0003C4 5 ASCII Len=00000F
"
0003DA 4 FIELD[SUBJ] Len=00004A
0003DC 5 ASCII Len=000048
"WinWord Testschriftst�ck
00042B 4 FIELD[AUTH] Len=00002E
000431 5 SEQ Len=000028
000438 6 ENT[NAME] Len=000021
00043E 7 SEQ Len=000000
000444 7 SEQ Len=000015
00044B 8 ATTR[USERID] Len=00000E
00044D 9 ASCII Len=00000C
"Frank Balkow
000460 4 FIELD[ATTACH] Len=0007B9
000467 5 MSG[DECBODY_07] Len=0007B2
00046E 6 VEND[IMAGE] Len=0007AB
000471 7 VEND[IMAGTY] Len=000011
000473 8 ASCII Len=00000F
"
000489 7 VEND[IMAGPROC] Len=00000D
00048F 8 ASCII Len=000007
"FOREIGN
00049D 7 VEND[IMAGDAT] Len=00077C
0004A0 8 BITS[%00] Len=000008
%0402000201000000
0004AB 8 BITS[%00] Len=000054
%0200020000000300040000
%0000000400010000050001
%0000060002000000070004
%0000000000090004000600
%00000A00020000000C0001
%00040D000100020E000200
%00000F0001000010000100
%00110002000000
000504 8 BITS[%00] Len=000400
%9BA52100A1203100000000
%0019000000000000000000
%000080010000E401000010
%0700000000000000000000
%0000000000000000640000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0006000037000006000037
%0037060000000037060000
%0000370600000000370600
%000000370600000E004506
%0000120057060000000057
%0600000000570600000000
%570600000000570600000A
%00610600000A0057060000
%00006B06000021008C0600
%0004009006000000009006
%0000000090060000000090
%0600000000900600000000
%9006000000009006000000
%0090060000000090060000
%0000900600000000900600
%000000900600001E00AE06
%00004200F00600002000AE
%0600000000370600000000
%AE0600000000AE06000000
%00AE060000000000000100
%0200010001000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000054
%4553543A0D0AE4FCF6C4DC
%D623272B2A7EB4605CDF3F
%7D5D5B7B407C3E3CB55EB0
%0D0AE4FCF6C4DCD623272B
%2A7EB4605CDF3F7D5D5B7B
%407C3E3CB55EB00D0AE4FC
%F6C4DCD623272B2A7EB460
%5CDF3F7D5D5B7B407C3E3C
%B55EB00D0A0D0A0D0A0D0A
%0000000000000000000000
%0000000000000000000000
%00000000000080010000A4
%010000C1010000E2010000
%E401000000FDFB00000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000030008050300080400
%04
000909 8 BITS[%00] Len=000310
%8001000087010000A40100
%00C1010000DE010000E001
%0000E2010000E4010000FB
%FBF6F1F1F1FB0000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000000
%0000000000000000000400
%00017023DD000000040000
%017023E200000004000001
%7023F00000070000050000
%FFFF0D0000FF0801300000
%180000101B000C00000000
%0000000503167800FF0A02
%00000000000015F0000300
%00DE000000000000000064
%0000001100FFFFFFFF0000
%0000640000000802FFFF00
%000100000080010000E401
%0000010080010000E40100
%00020021000892526F6D61
%6E00FF0822417269616C00
%000C0257696E6764696E67
%7300026400000001800100
%42000000420000000A000A
%000A004200000000000000
%000000002200020003030C
%000000C641822E89058905
%6E0489050000C4020000A9
%0100000000BA6AD165EF6A
%D165000000000500070000
%0000000000000000000000
%0000000020000000000000
%000B5363686572696E6720
%41470B5363686572696E67
%204147
000C1A 0End of file
|
| 162.3 | Patch available off-line | STKOFF::SPERSSON | Pas de probleme | Thu Feb 18 1993 20:20 | 8 |
|
A patch has been mailed to Klaus. It will be posted in the usual place
within weeks in this conference (5.*) if Klaus reports no problems.
In the meantime if anyone has similar problems just shout.
cheers,
Stefan
|
| 162.4 | Patch in 5.22 | STKOFF::SPERSSON | Pas de probleme | Tue Jun 22 1993 12:03 | 4 |
|
Hi,
For completeness, the patch in 5.22 corrects this problem.
|