| Title: | VAX MAILGATE for MEMO |
| Moderator: | STKHLM::OLSSON |
| Created: | Sat Feb 25 1989 |
| Last Modified: | Tue May 14 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 216 |
| Total number of notes: | 933 |
What DDS alias fields does MRMEMO use? (For example, SN_U and SN_L)
Can the MRMEMO value be the same as the PR_x value as DDS would allow?
Our customer will have MR/P connected PROFs systems and VAX MAILGATE
for MEMO implemented to the same MEMO nodes.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 134.1 | No problems | STKHLM::OLSSON | Anders Olsson, SIP Sweden | Tue Apr 07 1992 08:44 | 12 |
.0> What DDS alias fields does MRMEMO use? (For example, SN_U and SN_L)
When DDS is used, you can configure MRMEMO to use either the SN- (USER and
LOCATION) DDS attributes or the PR- (USER and LOCATION) attributes to
lookup the Memo users' identification (DGN and DEN).
.0> Can the MRMEMO value be the same as the PR_x value as DDS would allow?
You mean SN_USERNAME = PR_USERNAME and/or SN_LOCATION = PR_LOCATION?
That should be no problem.
Anders
| |||||
| 134.2 | Network definitions | 58950::CAESAR | Ian Caesar (VCO 604-380-2106) | Wed Apr 29 1992 01:35 | 8 |
Feedback from the customer:
Thanks for the information. However, the main concern is not the entry
in DDS as much as as the IBM network definitions. If I have a network
definition on the VM node, can I use the same network name through the
MVS for the MEMO gateway.
(This customer has a large OV/VM environment.)
| |||||