T.R | Title | User | Personal Name | Date | Lines |
---|
293.1 | Indoor running water at the Mill | DENTON::AMARTIN | Alan H. Martin | Wed Apr 01 1987 12:35 | 3 |
| From your first sentence, I thought I was going to read that we all
had to report for sand-bag duty in Maynard this morning.
/AHM/SIGH
|
293.2 | | MORRIS::MORRISON | Bob M. LMO2/P41 296-5357 | Thu Apr 02 1987 11:21 | 5 |
| This sounds like an excellent way for DEC to save a few bucks on
electricity and do something that looks good in the press, both
internal and public.
What is the electricity used for? Is it "clean" enough to be used
for computers without elaborate power conditioning equipment?
|
293.3 | | ERASER::KALLIS | Hallowe'en should be legal holiday | Thu Apr 02 1987 15:50 | 14 |
| As I recall, the hydrolectric generator was originally installed
at the Mill, long before Digital, as the first source of electricity
in Maynard. Eventually, it fell out of service, when there were
competing and more cost-effective means of electrification.
However, when the Energy Crisis of some years ago made some uses
of electricity seem frivolous (such as outdoor Christmas-tree lights),
the generator was discovered, found to still be functional, and
used to light the company's Christmas-tree lights, at "no cost"
(at least in fuel). To be sure, it wasn't regulated nor noise-free,
but what do you need for tungsten filaments?
Steve Kallis, Jr.
|
293.4 | New generator, 170kW today | SLDA::OPP | | Thu Apr 02 1987 16:21 | 21 |
| It is my understanding that an entirely new generator has
been installed but fed mechanically off the original water-
wheel. I ran into the Plant Eng. electrical supervisor yes-
terday and asked him about the power output since we had
2 inches of rain or so; his reply was it was putting out in
the neighborhood of 170 kWatts. The old generator was some-
thing like 200+ volts at 40 Hz and not connectable to a 60
Hz power grid without some type of converter.
With regard to clean power, any DEC product should meet
both DEC STD 103 (electromagnetic radiation and susceptibility)
and DEC STD 122 (AC power). Examples of tests under these
standards are continued operation through a 15 kV electro-
static discharge and through 1000V line transients. Thus
recent DEC products do not require particularly clean power
depending upon your definition of "clean". A local generator
has less chance of certain types of power line disturbance,
lightening for example.
Greg
|
293.5 | Waterpower for Microvaxen | JON::MORONEY | Light the fuse and RUN! | Fri Apr 03 1987 00:50 | 8 |
| The generator is a new box, connected to the old waterwheel/turbine by a belt.
It is a mere fraction of the size of the old generator. It is fed into the
main breaker box of Bldg. 4, so its power already feeds several Microvaxen in
the Mill. Since the generator is a brushless induction generator, power spikes
aren't a problem. Interesting thing about an induction generator is it cannot
produce power without hooking up to an already energized power grid.
-Mike
|
293.6 | Wind Power Next? | LEPTON::GALVIN | Its quality, not quantity, which counts | Fri Apr 03 1987 09:11 | 6 |
| In England there is a quaint old custom called april fool day.
Do Americans observe this practice?
Regards
Steven
|
293.7 | USAians do, an example follows | VAXRT::WILLIAMS | | Fri Apr 03 1987 09:23 | 23 |
| When I was growing up we lived across from the high
school, until I was in 7th grade, then we moved a mile away,
to be beside the grade school. I always seem to be doing
that.
Lightning strikes again. A some of you know recently
my family decided to find a house closer to Maynard and
Littleton, where I and my wife work, respectively. We have
sold our house in Pepperell and found one in Ayer.
Now I learn that DEC has decided to centralize all the
PDP-11 operating system groups in one location. They have
purchased an old brick mill, called the braiding mill, in
Pepperell. I understand that, fittingly, they are assigning
the location code PDP to the place.
As soon as they get the braiding equipment (used to
make macreme(SP?) cord) out they will begin renovations.
These are slated to take about 9 months, but these things
always take more time than scheduled, so I would guess that
the first software engineers will be moving in around the
4th quarter fiscal 88.
|
293.8 | April Fools is over | FSTVAX::FOSTER | Frank Foster -- Cincinnati Kid | Fri Apr 03 1987 11:27 | 6 |
| re .6 and .0
Now I'm confused, I assumed .0 was serious, but now I have my doubts;
am I too gullible or is .0 serious??
Frank
|
293.9 | | JON::MORONEY | Light the fuse and RUN! | Fri Apr 03 1987 11:38 | 5 |
| re .8: The hydropower from the Millpond is quite real. If you don't believe
me, stop by and wet your fingers and touch the wires coming out of the thing,
and see if you get a shock.
-Mike
|
293.10 | Written by home-made electricity | MAY20::MINOW | I need a vacation | Fri Apr 03 1987 12:17 | 10 |
| To set the record straight regarding the old generator -- it has two
components: a small generator that powered the field windings of the
large generator. When the power crisis hit, the christmas tree
was powered off of the field winding generator.
The old generator is, of course, quite a bit more impressive than the
new gray box.
Martin.
|
293.11 | Generator discussions in MAYNARD conference | DENTON::AMARTIN | Alan H. Martin | Sun Apr 05 1987 19:44 | 3 |
| See also the discussions on the generator in topics 2 and 18 in
SPIDER::MAYNARD (q.v.).
/AHM
|