| Title: | CSGUK_SYSTEMS |
| Notice: | No restrictions on keyword creation |
| Moderator: | KERNEL::ADAMS |
| Created: | Wed Mar 01 1989 |
| Last Modified: | Thu Nov 28 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 242 |
| Total number of notes: | 1855 |
Status lights on T1035. The T1034 is a dual purpose module with an ethernet interface and a TK50 interface. When it is connected to an ethernet cable it is known as a DEBNA and the green leds have no meaning.(Do not swap modules because the green led is not illuminated) When it is connected to a TK50 it is known as a TBK50 and the green leds illuminate to indicate that the tape drive has passed self test. There is no information in the current VAXBI options handbook on T1035. This module is known as a TBK70 and is a T1034 modified to fully drive a TK70. It has also been cost reduced by removing the ethernet interface so it is not interchangeable with the T1034. The green leds have the same meaning as the T1034 (I think). It is however possible to use a T1034 in place of a T1035 to READ TK50 format tapes in a TK70 drive. Regards, Ken.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 52.1 | BI device Codes | KERNEL::MOUNTFORD | Fri Jul 14 1989 10:45 | 14 | |
BI device types.
---------------
CODE DEVICE BOARD #
0001 MS820 8200 MEMORY 2MB T1008
0102 DWBUA UNIBUS TO BI ADAPTER T1010
0103 BLA TU TAPE INTERFACE T1014
0105 KA820 8200/8300 CPU BOARD T1001
0106 NBIB NAUTILUS BI ADAPTER T1020
0109 DMB32 COMBO (DMF32 ON BI) T1012
010B CIBCI CI TO BI ADAPTER T1017,T1018
010E KDB50 BI DISK ADAPTER T1002,T1003
010F DEBNT BI ETHERNET ADAPTER T1032
| |||||
| 52.2 | SLM led indicators...mening of | KERNEL::MOUNTFORD | Tue Nov 21 1989 03:01 | 109 | |
Layout of SLM
Front View
Switch action
H7066-A Selects Indicates Center no action
___________ ______________________________________________________________
| | | | | | |
| | | | | | |
| | | | SW1 | K1 | |<========| |========>|
| | | | | | |
| | | | | | Module | |Module |
| | | | | | |
| | | | SW2 | K2 | | output | |margin |
| | | | | | |
| | | | | | | | |
| | | | | | |
| | | | SW3 | K3 | |shutdown | | enable |
| | | | | | |
| | | | | | | | |
| | | | | | |
| | | | SW4 | K4 | |<========| |========>|
| | | | | | |
| | |--------|--------|---------------- -| |
| | | | | | |
| | | | SW5 | Margin | |High <== margin==> low|
| | | | | | |
| | |--------|--------|---------------- -| |
| | | | | | |
| O | | L1 | | Margin selected | |
| | | | | | |
| | |--------|--------|---------------- -| |
| | | | | | |
| O | | L2 | | K1 not ok | |
| | | | | | |
| | | | | | |
| | | | | | |
| O | | L3 | | K2 not ok | |
| | | | | | |
| | | | | | |
| | | | | | |
| O | | L4 | | K3 not ok | |
| | | | | | |
| | | | | | |
| | | | | | |
| O | | L5 | | k4 not ok | |
| | | | | | |
| | |--------|--------|-------------------| |
| | | | | | |
| O | | L6 | | K1 Diff temp | |
| | | | | error | |
| | | | | | |
| O | | L7 | | K2 Diff temp | |
| | | | | error | |
| | | | | | |
| O | | L8 | | K3 Diff temp | |
| | | | | error | |
| | | | | | |
| O | | L9 | | K4 Diff temp | |
| | | | | error | |
|_________| |________|________|___________________|______________________|
H7066-A SLM Module
Side View
__
_________________________________________________||
| || Front
| ||
| || __Face Plate
| ||/
| ||
| ||
| ||
| ||
| _________Switch pack
| / ||
| / ||
| / ||
| S1 ---- ||
| S2 ---- ||...
| S3 ---- |... :
| || ::
|________________________________________________|| ::
||
|
S1 S2 S3 |
__________|
|
0 0 0 | (4) six slot BI channels's {4 Pack}
0 0 1 | (1) 12 slot [K4 & K3] and two six slot BI channels's {3 Pack}
0 1 0 | (2) 12 slot BI channels's [K4 & K3; K2 & K1] {2 Pack}
0 1 1 | (1) 24 slot BI Channel {1 Pack}
1 x x | (1) 18 slot [K4,K3&K2] & (1) six slot BI Channel's {B Pack}
NOTE:
-- 0 is on; [closed]
-- S1 is the switch closest to the LED's
| |||||