[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | CSGUK_SYSTEMS |
| Notice: | No restrictions on keyword creation |
| Moderator: | KERNEL::ADAMS |
|
| Created: | Wed Mar 01 1989 |
| Last Modified: | Thu Nov 28 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 242 |
| Total number of notes: | 1855 |
31.0. "1184 Topic" by KERNEL::ADAMS (Venus on Remote Control) Thu Apr 20 1989 03:15
SOME HELP ON PDP 11/84 SYSTEMS & RD.
This article comes from Valbonne (So bear with it on spelling/grammar)
----------------------------------------------------------------------------
I got the following info from the RDC here in VBO.
I will send you the BREAK.EXE program and you will copy it to the
RSDS$SYSTEM directory, then in rsds$:rsdlogin.com you define the
BREAK symbol:
$ break == "$rsds$system:break.exe
hello every body ,a big news. PDP 11/84 are now onnectable
I give you some informations about connection with 11/84
A new very important command has been created : BREAK .
You send this command at the REM prompt.
The BREAK command is used to put the cpu in halt and ODT mode.
ODT on 11/84 is the same than PDP 11/03 (lsi 11 on VAX 11/780)
You can do an entry with cpu type 11/84 and rd consol type mds01
You can see also an exemple issue of the first connection on a
PDP 11/84. all commands send from Valbonne are underligned
to make example clear.
REM> COPY/ON
-------
REM> TRA
---
Trans mode [protocol off] ( ^A to exit)...
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: B MS
----
Trying MS0
Starting ROM boot
BOOTING UP XXDP-XM EXTENDED MONITOR
XXDP-XM EXTENDED MONITOR VERSION 2.1
BOOTED FROM MS0
124KW OF MEMORY
UNIBUS SYSTEM
RESTART ADDR: 065570
THIS IS XXDP-XM. TYPE "H" OR "H/L" FOR HELP.
.
Exit Trans mode...
REM> BREAK
-----
Send break sequance
REM>
REM> TRA
---
Trans mode [protocol off] ( ^A to exit)...
?
@P (P for proceed. )
-
.DIR
ENTRY# FILNAM.EXT DATE LENGTH START
1 XXBOOT.MON 11-JUN-85C
2 XXDPXM.SYS 11-JUN-85
3 XXDPSM.SYS 11-JUN-85
4 DRSXM .SYS 11-JUN-85
5 DRSSM .SYS 11-JUN-85
^C
.
Exit Trans mode...
REM> BREAK
-----
Send break sequance
REM> TRA
---
Trans mode [protocol off] ( ^A to exit)...
?
@173000G (g means start at address just before )
-------
BOOTING UP XXDP-XM EXTENDED MONITOR
XXDP-XM EXTENDED MONITOR VERSION 2.1
BOOTED FROM MS0
124KW OF MEMORY
UNIBUS SYSTEM
RESTART ADDR: 065570
THIS IS XXDP-XM. TYPE "H" OR "H/L" FOR HELP.
.
Exit Trans mode...
REM> BREAK
-----
Send break sequance
REM> TRAN
----
Trans mode [protocol off] ( ^A to exit)...
?
@0/000002 ( ODT mode. / to open and examine a location
00000002/000000 ( <LF> to open and examine the next one )
00000004/000006
00000006/000000
00000010/000012
00000012/000000
00000014/000016
00000016/000000
00000020/000022
00000022/000000
00000024/000026
00000026/000000
00000030/103016
@157776/000000 01474 (you can deposit a new value and <CR> to close location
@
Exit Trans mode...
REM> BREAK
-----
REM> COPY/ON
-------
REM> TA
--
Enter talk mode ....( ^Z to exit )
Exit talk mode ....
REM> TRA
---
Exit Trans mode...
REM> COPY/ON
-------
REM> TRA
---
Trans mode [protocol off] ( ^A to exit)...
REM> BREAK
-----
Send break sequance
REM> TRA
---
Trans mode [protocol off] ( ^A to exit)...
?
@173000G
-------
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
Step 1 2 3 4 5 6 7 8 9
Message 04 Entering Dialog mode
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: HELP
Command Description
Help Type this message
Boot Load and start a program from a device
List List boot programs
Setup Enter Setup mode
Map Map memory and I/O page
Test Continuous self test - Type CTRL C to exit
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: LIST
Device Unit
name numbers Source Device type
DU 0-255 CPU ROM RD51, RD52, RX50, RC25, RA80, RA81, RA60
DL 0-3 CPU ROM RL01, RL02
DX 0-1 CPU ROM RX01
DY 0-1 CPU ROM RX02
DD 0-1 CPU ROM TU58
DK 0-7 CPU ROM RK05
MU 0-255 CPU ROM TK50, TU81
MS UBA ROM TS04, TS11, TU80, TK25, TS05
DU 0-255 UBA ROM RD51, RD52, RX50, RC25, RA80, RA81, RA60
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: MAP
18.000 MHz
CPU Options: FPA
Memory Map
Starting Ending Size in CSR CSR Bus
Address address K Bytes address type type
00000000 - 07777776 2048 17772100 ECC PMI
10000000 - 17757776 2040 17772102 ECC PMI
Press the RETURN key when ready to continue
I/O page Map
Starting Ending
Address address
17760050 - 17760066
17760200 - 17760226
17765000 - 17765776 CPU ROM or EEPROM
17770200 - 17770376 Unibus Map
17772100 - 17772102 Memory CSR's
17772150 - 17772152
17772200 - 17772276 Supervisor I and D PDR/PAR's
17772300 - 17772376 Kernel I and D PDR/PAR's
17772516 MMR3
17772520 - 17772522
17773000 - 17773776 CPU ROM or UBA ROM
17777514 - 17777516
17777520 - 17777524 BCSR, PCR, BCR/BDR
17777546 Clock CSR
17777560 - 17777566 Console SLU
17777572 - 17777576 MMR0,1,2
17777600 - 17777676 User I and D PDR/PAR's
Press the RETURN key when ready to continue
I/O page Map
Starting Ending
Address address
17777730 - 17777734 DCSR, DDR, KMCR
17777744 - 17777752 MSER, CCR, MREG, Hit/Miss
17777766 CPU Error
17777772 PIRQ
17777776 PSW
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: B MS0
-----
Trying MS0
Starting ROM boot
BOOTING UP XXDP-XM EXTENDED MONITOR
XXDP-XM EXTENDED MONITOR VERSION 2.1
BOOTED FROM MS0
124KW OF MEMORY
UNIBUS SYSTEM
RESTART ADDR: 065570
THIS IS XXDP-XM. TYPE "H" OR "H/L" FOR HELP.
.
Exit Trans mode...
REM> BREAK
-----
Send break sequance
REM> TRA
---
Trans mode [protocol off] ( ^A to exit)...
@173000G
-------
BOOTING UP XXDP-XM EXTENDED MONITOR
XXDP-XM EXTENDED MONITOR VERSION 2.1
BOOTED FROM MS0
124KW OF MEMORY
UNIBUS SYSTEM
RESTART ADDR: 065570
THIS IS XXDP-XM. TYPE "H" OR "H/L" FOR HELP.
.
Exit Trans mode...
REM> DISconnect
---
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|