| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Hi,
I have a customer who is seeing the following access violation from
enabling DECmcc alarm rules and then issueing a show command with an at
start qualifier of (+999-00:00:00). Shortly after that, he gets the
accvio message. He has about 48 rules he is enabling and has also
tried dividing up the enables into 6 separate command procedures
containing 8 rules each. All of the batch processes terminate with the
accvio.
show domain computers rule node_unreachable , -
at start=(+999-00:00:00)
Using default ALL IDENTIFIERS
%CMA-F-EXCCOP, exception raised; VMS condition code follows
-SYSTEM-F-ACCVIO, access violation, reason mask=00,
virtual address=00000004,
PC=000730E4, PSL=03C00000
%TRACE-F-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
0004F9DC 0004F9DC
00086132 00086132
0007FB0C 0007FB0C
00082E9C 00082E9C
Thanks for any ideas,
Walt McGaw
Digital Network Services Unit
CSC/CS
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 6442.1 | pls. supply more info... | SCASS1::GALVIN | The Energizer Bunny's Trainer... | Sat Apr 20 1996 18:01 | 21 |
Walt,
Pls. provide more detail... what version of OpenVMS? Are you using
DETmcc? Is this a new installation? Has this "method" ever worked? If
'YES', when was the last time it ran properly and more importantly,
what was changed just prior to it breaking...?
I'm not familiar with the +999, but I'm not an internals wizard... 8^)!
Are you sure this is allowable? The accvio message is puzzling... in
the past, we've seen CMA errors when upgrading from OpenVMS V5.5-2 to
V6.1; there's a patch for that... Also, look into other patches, that I
believe are in the CSC and in other notes in this conference...
BTW, if you are using BMS V1.4, and using the Alarm Manager, which is
one of the apps you can launch from the IMPM, this could be your
problem... to the best of my knowledge... it don't work!
good luck,
/Mic
| |||||
| 6442.2 | Maybe a quotas problem ? | DSVB03::TABONE | Mon Apr 22 1996 15:14 | 14 | |
Hi Walt, I agree with Mic's questions. I add one : are the quotas well set ? I often see this problem for bad quotas reasons ! The mcc command with "at start=(+999-00:00:00)" qualifier is correct and recommended in alarm fm manual use. Has your customer the problem if he runs only one of his batch processes (ie : enabling only 8 rules ) ? After how long do the ACCVIOs occur ? Best regards, Philippe Tabone - DECmcc Maintenance Team - | |||||
| 6442.3 | Lots of additional information about problem. | GADWAL::W_MCGAW | Mon Apr 22 1996 17:11 | 579 | |
Hi Philippe and Mic,
I have included as much information as I have about this problem.
I have also surounded my comments in the following manor. The rest of
the information was supplied by the customer.
!++
!
! My comments
!
!--
Log of this run of MCC_AUDIT written to MCC_AUDIT_LOG.TXT
MIN_SRPCOUNT = 2048 ! Ok current value is 2146051584
MIN_CLISYMTBL = 250 ! Ok current value is 500
MIN_LOCKIDTBL = 2048 ! Ok current value is 2688
MIN_PROCSECTCNT = 200 ! Ok current value is 256
MIN_RESHASHTBL = 512 ! Ok current value is 2048
MIN_MAXBUF = 1200 ! Ok current value is 2064
MIN_PAGEDYN = 1000448 ! Ok current value is 1644544
MIN_NPAGEDYN = 900096 ! Ok current value is 1483776
MIN_GBLPAGFIL = 12200 ! Ok current value is 12200
MIN_CTLPAGES = 32 ! Ok current value is 100
MIN_PQL_MASTLM = 600 ! Ok current value is 600
MIN_WSMAX = 16000 ! Ok current value is 44000
MIN_CHANNELCNT = 512 ! Ok current value is 1024
MIN_GBLSECTIONS = 600 ! Ok current value is 2400
Actually, I am on a different workstation, starting up a decterm remotely on
the workstation with MCC installed. This is the only window I have open on
that
system.
Here are my quotas... The only difference was Bytlm. Mine was 100000. I
boosted
it up to 200000 and the alarms still stack dump.
Maxjobs: 0 Fillm: 400 Bytlm: 200000
Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0
Maxdetach: 0 BIOlm: 8192 JTquota: 8192
Prclm: 24 DIOlm: 8192 WSdef: 4096
Prio: 4 ASTlm: 2048 WSquo: 24288
Queprio: 0 TQElm: 1024 WSextent: 98304
CPU: (none) Enqlm: 8192 Pgflquo: 120000
I ran ANALYZE/SYSTEM to look at the running batch job, and found that the
BUFIO byte count was equal to the BUFIO byte limit (200,000) so I raised it to
400000, and tried enabling all 20 alarms... The process immediately took all
of
those resources as well. Here is the process data along with the formatted
JIB.
What is going on?
Sean
Process index: 0024 Name: BATCH_36 Extended PID: 000001E4
-------------------------------------------------------------
Status : 00044001 res,batch,phdres
Status2: 00000001 quantum_resched
PCB address 84420800 JIB address 843D4700
PHD address 8597AC00 Swapfile disk address 00000000
Master internal PID 00070024 Subprocess count 0
Internal PID 00070024 Creator internal PID 00000000
Extended PID 000001E4 Creator extended PID 00000000
State HIB Termination mailbox 0000
Current priority 3 AST's enabled KESU
Base priority 3 AST's active NONE
UIC [00001,000010] AST's remaining 596
Mutex count 0 Buffered I/O count/limit 1023/1024
Waiting EF cluster 0 Direct I/O count/limit 1024/1024
Starting wait time 1C001C1C BUFIO byte count/limit 397248/397248
Event flag wait mask DFFFFFFF # open files allowed left 283
Local EF cluster 0 E0000000 Timer entries allowed left 147
Local EF cluster 1 60000000 Active page table count 0
Global cluster 2 pointer 00000000 Process WS page count 10490
Global cluster 3 pointer 00000000 Global WS page count 221
843D4700 JIB$L_MTLFL 843D4700 JIB
843D4704 JIB$L_MTLBL 843D4700 JIB
843D4708 JIB$W_SIZE 00C0
843D470A JIB$B_TYPE 2F
843D470B JIB$B_DAYTYPES 60
843D470C JIB$T_USERNAME "DIGITALNC "
843D470C 49474944
843D4710 4E4C4154
843D4714 20202043
843D4718 JIB$T_ACCOUNT "FIELD "
843D4718 4C454946
843D471C 20202044
843D4720 JIB$L_BYTCNT 00060FC0
843D4724 JIB$L_BYTLM 00060FC0
843D4728 JIB$L_PBYTCNT 00000000
843D472C JIB$L_PBYTLIM 00000000
843D4730 JIB$W_FILCNT 011B
843D4732 JIB$W_FILLM 012C
843D4734 JIB$W_TQCNT 0093
843D4736 JIB$W_TQLM 0096
843D4738 JIB$L_PGFLQUOTA 000186A0
843D473C JIB$L_PGFLCNT 00012C98
843D4740 JIB$L_CPULIM 00000000
843D4744 JIB$W_PRCCNT 0000
843D4746 JIB$W_PRCLIM 000A
843D4748 JIB$W_SHRFCNT 0000
843D474A JIB$W_SHRFLIM 0000
843D474C JIB$W_ENQCNT 0773
843D474E JIB$W_ENQLM 07D0
843D4750 JIB$W_MAXJOBS 0000
843D4752 JIB$W_MAXDETACH 0000
843D4754 JIB$L_MPID 00070024
843D4758 JIB$L_JLNAMFL 00000000
843D475C JIB$L_JLNAMBL 00000000
843D4760 JIB$L_PDAYHOURS 00000000
843D4764 JIB$L_ODAYHOURS 00000000
843D4768 JIB$B_JOBTYPE 02
843D4769 JIB$B_FLAGS 00
843D476A 0000
843D476C JIB$L_ORG_BYTLM 00061A80
843D4770 JIB$L_ORG_PBYTLM 00000000
843D4774 JIB$L_SPARE 00000000
843D4778 JIB$L_CWPS_TIME 00000000
843D477C JIB$L_CWPS_COUNT 00000000
843D4780 JIB$Q_CWPS_Q1 00000000
843D4784 00000000
843D4788 JIB$L_CWPS_L1 00000000
843D478C JIB$L_CWPS_L2 00000000
843D4790 JIB$L_JTQUOTA 00000000
JIB$C_LENGTH
------------------------ PROCESS QUOTAS--------------------------------
Username: SPC Owner: Sean Coughlan
Account: COMOPS UIC: [120,22] ([COMOPS,SPC])
CLI: DCL Tables: SHARP$EXE:SYSMGRTABLES.EXE
Default: DISK$COMOPS:[SPC]
LGICMD:
Flags:
Primary days: Mon Tue Wed Thu Fri
Secondary days: Sat Sun
No access restrictions
Expiration: (none) Pwdminimum: 6 Login Fails: 0
Pwdlifetime: 180 00:00 Pwdchange: 12-FEB-1997 17:30
Last Login: 7-APR-1996 02:45 (interactive), 19-APR-1996 13:19
(non-interactive)
Maxjobs: 0 Fillm: 400 Bytlm: 200000
Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0
Maxdetach: 0 BIOlm: 8192 JTquota: 8192
Prclm: 24 DIOlm: 8192 WSdef: 4096
Prio: 4 ASTlm: 2048 WSquo: 24288
Queprio: 0 TQElm: 1024 WSextent: 98304
CPU: (none) Enqlm: 8192 Pgflquo: 120000
Authorized Privileges:
ACNT ALLSPOOL ALTPRI AUDIT BUGCHK BYPASS CMEXEC CMKRNL
DETACH DIAGNOSE DOWNGRADE EXQUOTA GROUP GRPNAM GRPPRV IMPORT
LOG_IO MOUNT NETMBX OPER PFNMAP PHY_IO PRMCEB PRMGBL
PRMMBX PSWAPM READALL SECURITY SETPRV SHARE SHMEM SYSGBL
SYSLCK SYSNAM SYSPRV TMPMBX UPGRADE VOLPRO WORLD
Default Privileges:
ACNT ALLSPOOL ALTPRI AUDIT BUGCHK BYPASS CMEXEC CMKRNL
DETACH DIAGNOSE DOWNGRADE EXQUOTA GROUP GRPNAM GRPPRV IMPORT
LOG_IO MOUNT NETMBX OPER PFNMAP PHY_IO PRMCEB PRMGBL
PRMMBX PSWAPM READALL SECURITY SETPRV SHARE SHMEM SYSGBL
SYSLCK SYSNAM SYSPRV TMPMBX UPGRADE VOLPRO WORLD
------------------------------------------------------------------------------
-
------------------------ SYSGEN SHOW/MAJOR------------------------------------
Parameters in use: Active
Parameter Name Current Default Min. Max. Unit
Dynamic
-------------- ------- ------- ------- ------- ----
-------
PFCDEFAULT 64 32 0 127 Pages D
GBLSECTIONS 2400 250 60 4095 Sections
GBLPAGES 62000 15000 512 4194176 Pages
MAXPROCESSCNT 42 32 12 8192 Processes
SMP_CPUS -1 -1 0 -1 CPU bitmas
SYSMWCNT 1560 508 48 32767 Pages
BALSETCNT 37 16 4 8192 Slots
WSMAX 44000 1024 60 1048576 Pages
NPAGEDYN 1999872 620000 16384 -1 Bytes
PAGEDYN 1644544 214100 14336 -1 Bytes
VIRTUALPAGECNT 171840 12032 512 4194304 Pages
QUANTUM 20 20 2 32767 10Ms D
PFRATL 0 0 0 -1 Flts/10Sec D
PFRATH 120 120 0 -1 Flts/10Sec D
WSINC 150 150 0 -1 Pages D
WSDEC 250 250 0 -1 Pages D
FREELIM 57 32 16 -1 Pages
FREEGOAL 12000 200 16 -1 Pages D
GROWLIM 57 63 0 -1 Pages D
BORROWLIM 57 300 0 -1 Pages D
LOCKIDTBL 8320 200 127 4194304 Entries
LOCKIDTBL_MAX 65535 65535 127 4194304 Entries D
RESHASHTBL 2048 64 1 65535 Entries
------------------------------------------------------------------------------
-
!++
!
! The customer has many domains and I removed all but one of the terminal
! server alarm rules because of this. All of the rules are the same
! except for the domain name.
!
!--
------------------------ ALARM RULES -----------------------------------------
create domain computers rule NODE_UNREACHABLE -
expression = -
(node4 * state <> on, at every 00:30:00) ,-
alarm fired procedure = mcc_common:mcc_alarms_mail_alarm.com ,-
alarm exception procedure = mcc_common:mcc_alarms_mail_exception.com ,-
alarm fired parameter = @SYS$MANAGER:SYS$MANAGER.DIS ,-
category = "Node Unreachable" ,-
description = "Node has become unreachable." ,-
severity = critical
create domain computers rule adjacency_down -
expression = -
(occurs(node4 * circuit * adjacent node * adjacency down)), -
category = "circuit_events",-
DESCRIPTION = "This rule is made on routers to detect if any of the adjacent
nodes become unreachable",-
alarm fired procedure = mcc_common:mcc_alarms_mail_alarm.com ,-
alarm exception procedure = mcc_common:mcc_alarms_mail_exception.com ,-
alarm fired parameter = @sys$manager:sys$manager.dis ,-
severity = critical
create domain scv rule NODE_UNREACHABLE -
expression = -
(node4 * state <> on, at every 00:30:00) ,-
alarm fired procedure = mcc_common:mcc_alarms_mail_alarm.com ,-
alarm exception procedure = mcc_common:mcc_alarms_mail_exception.com ,-
alarm fired parameter = @SYS$MANAGER:SYS$MANAGER.DIS ,-
category = "Node Unreachable" ,-
description = "Node has become unreachable." ,-
severity = critical
create domain scv rule adjacency_down -
expression = -
(occurs(node4 * circuit * adjacent node * adjacency down)), -
category = "circuit_events",-
DESCRIPTION = "This rule is made on routers to detect if any of the adjacent
nodes become unreachable",-
alarm fired procedure = mcc_common:mcc_alarms_mail_alarm.com ,-
alarm exception procedure = mcc_common:mcc_alarms_mail_exception.com ,-
alarm fired parameter = @sys$manager:sys$manager.dis ,-
severity = critical
create domain admin rule TERMINAL_SERVER_Unreachable -
expression = -
(TERMINAL_SERVER * lat node name = "", at every 00:30:00),-
alarm fired procedure = mcc_common:mcc_alarms_mail_alarm.com ,-
alarm exception procedure = mcc_common:mcc_alarms_mail_exception.com ,-
alarm fired parameter = @sys$manager:sys$manager.dis ,-
category = "Terminal Server Unavailable" ,-
description = "Terminal Server has become unreachable." ,-
severity = critical
!++
!
! The customer split his rules up so that he has about 8 enables per
! batch job. This did not help as you will see from the logs attached
! at the end of this information.
!
!--
------------------------ MCC_ALARM_ENABLE.COM ---------------------------------
$ set noon
$ @disk$comops:[mcc.startup]mcc_ip_poller_enable.com
$ submit/noprint/keep/user=spc -
disk$comops:[mcc.startup]mcc_terminal_server_alarms_enable_1.com
$ submit/noprint/keep/user=spc -
disk$comops:[mcc.startup]mcc_terminal_server_alarms_enable_2.com
$ submit/noprint/keep/user=spc -
disk$comops:[mcc.startup]mcc_terminal_server_alarms_enable_3.com
$ submit/noprint/keep/user=spc -
disk$comops:[mcc.startup]mcc_terminal_server_alarms_enable_4.com
$ submit/noprint/keep/user=spc -
disk$comops:[mcc.startup]mcc_terminal_server_alarms_enable_5.com
$ submit/noprint/keep/user=spc -
disk$comops:[mcc.startup]mcc_terminal_server_alarms_enable_6.com
$ manage/enterprise
@disk$comops:[mcc.startup]mcc_node_alarms_enable.com
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
exit
$ exit
-----------------------------------------------------------------------------
-
------------------------ MCC_TERMINAL_SERVER_ALARMS_ENABLE_1.COM ------------
$ manage/enterprise
enable domain admin rule TERMINAL_SERVER_Unreachable
enable domain cedar rule TERMINAL_SERVER_Unreachable
enable domain computers rule TERMINAL_SERVER_Unreachable
enable domain coronado rule TERMINAL_SERVER_Unreachable
enable domain fhh rule TERMINAL_SERVER_Unreachable
enable domain gmp rule TERMINAL_SERVER_Unreachable
enable domain gibbs rule TERMINAL_SERVER_Unreachable
enable domain imb rule TERMINAL_SERVER_Unreachable
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
-----------------------------------------------------------------------------
-
------------------------ MCC_TERMINAL_SERVER_ALARMS_ENABLE_2.COM ------------
$ manage/enterprise
enable domain mbh rule TERMINAL_SERVER_Unreachable
enable domain mesa rule TERMINAL_SERVER_Unreachable
enable domain mission rule TERMINAL_SERVER_Unreachable
enable domain network rule TERMINAL_SERVER_Unreachable
enable domain sch rule TERMINAL_SERVER_Unreachable
enable domain scv rule TERMINAL_SERVER_Unreachable
enable domain sgr rule TERMINAL_SERVER_Unreachable
enable domain sharp rule TERMINAL_SERVER_Unreachable
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
-----------------------------------------------------------------------------
-
------------------------ MCC_TERMINAL_SERVER_ALARMS_ENABLE_3.COM ------------
$ manage/enterprise
enable domain shh rule TERMINAL_SERVER_Unreachable
enable domain shm rule TERMINAL_SERVER_Unreachable
enable domain smp rule TERMINAL_SERVER_Unreachable
enable domain smh rule TERMINAL_SERVER_Unreachable
enable domain smp rule TERMINAL_SERVER_Unreachable
enable domain srs rule TERMINAL_SERVER_Unreachable
enable domain srs-bp rule TERMINAL_SERVER_Unreachable
enable domain srs-cv rule TERMINAL_SERVER_Unreachable
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
-----------------------------------------------------------------------------
-
------------------------ MCC_TERMINAL_SERVER_ALARMS_ENABLE_4.COM ------------
$ manage/enterprise
enable domain srs-cvs rule TERMINAL_SERVER_Unreachable
enable domain srs-dm rule TERMINAL_SERVER_Unreachable
enable domain srs-dt rule TERMINAL_SERVER_Unreachable
enable domain srs-ec rule TERMINAL_SERVER_Unreachable
enable domain srs-hr rule TERMINAL_SERVER_Unreachable
enable domain srs-km rule TERMINAL_SERVER_Unreachable
enable domain srs-kw rule TERMINAL_SERVER_Unreachable
enable domain srs-lm rule TERMINAL_SERVER_Unreachable
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
-----------------------------------------------------------------------------
-
------------------------ MCC_TERMINAL_SERVER_ALARMS_ENABLE_5.COM ------------
$ manage/enterprise
enable domain srs-mm rule TERMINAL_SERVER_Unreachable
enable domain srs-pl rule TERMINAL_SERVER_Unreachable
enable domain srs-rb rule TERMINAL_SERVER_Unreachable
enable domain srs-rh rule TERMINAL_SERVER_Unreachable
enable domain srs-uc rule TERMINAL_SERVER_Unreachable
enable domain srsd rule TERMINAL_SERVER_Unreachable
enable domain ssh rule TERMINAL_SERVER_Unreachable
enable domain sky_park rule TERMINAL_SERVER_Unreachable
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
-----------------------------------------------------------------------------
-
------------------------ MCC_TERMINAL_SERVER_ALARMS_ENABLE_6.COM ------------
$ manage/enterprise
enable domain sycamore rule TERMINAL_SERVER_Unreachable
enable domain vista rule TERMINAL_SERVER_Unreachable
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
-----------------------------------------------------------------------------
-
------------------------ Errors from Log Files --------------------------------
!++
!
! I included only a couple examples of the customers errors since they all
! end the same way and after only a few minutes of the start of the batch job.
!
!--
******************************************************************************
**
Job Name: MCC_TERMINAL_SERVER_ALARMS_ENABLE_1
Entry Number: 00070
Queue: SYS$BATCH_SHCWS5
Node Name: SHCWS5
Submission Time: 19-APR-1996 10:31:21.70
Execution Time: 19-APR-1996 10:31:28.99
Username: SPC
Process ID: 0000031F
Procedure:
_SHCWS5$DKA0:[COMOPS.MCC.STARTUP]MCC_TERMINAL_SERVER_ALARMS_ENABLE_1.COM;1
Log File Name: DISK$COMOPS:[SPC]MCC_TERMINAL_SERVER_ALARMS_ENABLE_1.LOG;
******************************************************************************
**
$ manage/enterprise
DECmcc (V1.4-1)
enable domain admin rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.admin Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:07
Normal operation has begun.
enable domain cedar rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.cedar Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:09
Normal operation has begun.
enable domain computers rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.computers Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:13
No such entity: Domain LOCAL_NS:.computers Rule TERMINAL_SERVER_Unreachable
Unknown Entity = Domain LOCAL_NS:.computers Rule
TERMINAL_SERVER_Unreachable ,
enable domain coronado rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.coronado Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:17
Normal operation has begun.
enable domain fhh rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.fhh Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:19
No such entity: Domain LOCAL_NS:.fhh Rule TERMINAL_SERVER_Unreachable
Unknown Entity = Domain LOCAL_NS:.fhh Rule
TERMINAL_SERVER_Unreachable ,
enable domain gmp rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.gmp Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:23
Normal operation has begun.
enable domain gibbs rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.gibbs Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:26
Normal operation has begun.
enable domain imb rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.imb Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:30
Normal operation has begun.
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
Using default ALL IDENTIFIERS
%CMA-F-EXCCOP, exception raised; VMS condition code follows
-SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000004,
PC=000730E4, PSL=03C00000
%TRACE-F-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
0004F9DC 0004F9DC
00086132 00086132
0007FB0C 0007FB0C
00082E9C 00082E9C
SPC job terminated at 19-APR-1996 10:33:42.58
Accounting information:
Buffered I/O count: 209 Peak working set size: 10008
Direct I/O count: 142 Peak page file size: 28591
Page faults: 8250 Mounted volumes: 0
Charged CPU time: 0 00:00:09.00 Elapsed time: 0 00:02:20.82
******************************************************************************
**
Job Name: MCC_TERMINAL_SERVER_ALARMS_ENABLE_2
Entry Number: 00071
Queue: SYS$BATCH_SHCWS5
Node Name: SHCWS5
Submission Time: 19-APR-1996 10:31:21.93
Execution Time: 19-APR-1996 10:31:30.19
Username: SPC
Process ID: 00000523
Procedure:
_SHCWS5$DKA0:[COMOPS.MCC.STARTUP]MCC_TERMINAL_SERVER_ALARMS_ENABLE_2.COM;1
Log File Name: DISK$COMOPS:[SPC]MCC_TERMINAL_SERVER_ALARMS_ENABLE_2.LOG;
******************************************************************************
**
$ manage/enterprise
DECmcc (V1.4-1)
enable domain mbh rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.mbh Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:09
Normal operation has begun.
enable domain mesa rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.mesa Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:12
Normal operation has begun.
enable domain mission rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.mission Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:15
Normal operation has begun.
enable domain network rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.network Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:20
Normal operation has begun.
enable domain sch rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.sch Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:21
Normal operation has begun.
enable domain scv rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.scv Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:23
Normal operation has begun.
enable domain sgr rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.sgr Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:28
Normal operation has begun.
enable domain sharp rule TERMINAL_SERVER_Unreachable
Domain LOCAL_NS:.sharp Rule TERMINAL_SERVER_Unreachable
AT 19-APR-1996 10:32:33
No such entity: Domain LOCAL_NS:.sharp Rule TERMINAL_SERVER_Unreachable
Unknown Entity = Domain LOCAL_NS:.sharp Rule
TERMINAL_SERVER_Unreachable ,
show domain computers rule node_unreachable , -
at start=(+60-00:00:00)
Using default ALL IDENTIFIERS
%CMA-F-EXCCOP, exception raised; VMS condition code follows
-SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000004,
PC=000730E4, PSL=03C00000
%TRACE-F-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
0004F9DC 0004F9DC
00086132 00086132
0007FB0C 0007FB0C
00082E9C 00082E9C
SPC job terminated at 19-APR-1996 10:33:32.29
Accounting information:
Buffered I/O count: 218 Peak working set size: 10827
Direct I/O count: 123 Peak page file size: 29231
Page faults: 7642 Mounted volumes: 0
Charged CPU time: 0 00:00:09.40 Elapsed time: 0 00:02:10.30
| |||||
| 6442.4 | Need more informations | DSVB03::TABONE | Tue Apr 23 1996 14:46 | 9 | |
Hi Walt, Could you tell me what is the VMS version and if it is a phase 4 or phase 5 node ? Does they make some changes in the system : upgrades, new products like DEC C++, etc... Best regards, Philippe | |||||
| 6442.5 | VMS V6.1, no changes. | GADWAL::W_MCGAW | Tue Apr 23 1996 15:08 | 16 | |
Hi Philippe,
The customer is running DECmcc V1.4 and VMS V6.1. It is Phase IV
DECnet and this is being configured new. It has not worked in the past
and had any changes made.
Best regards,
Walt McGaw
Digital Network Services Unit
CSC/CS
P.S.
Let me know if you would like this escalated instead of working it via
the notes conference.
| |||||
| 6442.6 | okay for escalation. | DSVB03::TABONE | Tue Apr 23 1996 16:04 | 12 | |
Hi Walt, Yes, I think you should escalated this problem in IPMT. But before, could you verify that MCC was installed in last position ? As you certainly know at installation time MCC is linked with system libraries, So, if VMS was upgraded after mcc installed this should explain the problem. If it is the case, the solution is to install again mcc. There is certainly a problem like that because a lot of customers use the same way than yours to enable rules and have no problem ! Best regards, Philippe Tabone - DECmcc Maintenance Team - | |||||
| 6442.7 | Will check and escalate. | GADWAL::W_MCGAW | Tue Apr 23 1996 16:58 | 10 | |
Hi Philippe,
I will check that order with the customer and if DECmcc was installed
last, will go ahead with the escalation.
Thank you and best regards,
Walt McGaw
Digital Network Services Unit
CSC/CS
| |||||
| 6442.8 | God problem. But why is the client trying to do this? | RANGER::NAVKAL | Thu Apr 25 1996 02:40 | 14 | |
Well thats a good problem. If I were to make a guess the problem could be in either in IM or in Alarms. The +999 indicates future time (and I admit my meory is weak here). For the current maintainers/developers of Alarms module, this should be fairly easy problem to reproduce. The fact that it is on decnet has no bearing on the problem. The last time we did some thing like this was when I and my friend Samuil Shmuylovich wrote a paper on historical data and Alarms rule interaction. And this was back in 1992/93! Well please let us know what you find :-) Anil (x-PL for Alarms :-)) | |||||
| 6442.9 | escalating the problem. | GADWAL::W_MCGAW | Thu Apr 25 1996 15:52 | 13 | |
Hi Anil,
The customer has no better way to test for reachability of his node4
and terminal server entities. I believe it is a resource problem of
some sort because if we limit the alarms enabled to 5 it works for a
while. 10 alarms causes the error immediately. I am escalating this
to the DECmcc engineering group for their assistance and will try to be
sure to post the fix here when I receive it.
Regards,
Walt McGaw
Digital Network Services Unit
CSC/CS
| |||||