| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Hi,
this note looks like 4596 the difference are:
mVAX 3600
OpenVMS VAX V6.1
DECnet/OSI V6.1
DNS T2.0.0.0
MCCEMS V2.4
MCCPAT V1.0
The DECnet Phase IV Autoconfiguration's command sequence is:
[1] Discovery
[3] All DECnet Phase IV nodes in a LAN
Additional starting node(s) [46.954 46.116]:
reply is:
DECnet Phase IV Autoconfiguration starting data collection ...
This may take a while...
Error contacting seed node
Error contacting seed nodes; Pick a new seed node
Differently from note 4596.2 the "NCP> tell seed_node sho exec" commands
runs in this way:
NCP>tell 46.954 sho exec |46.954 is the owner
%NCP-F-CONNEC, unable to connect to listener |of DECMCC and has
-SYSTEM-F-REJECT, connect to network object rejected |DECnet/OSI V6.1
NCP>tell 46.116 sho exec |46.116 is a DECnet
|Phase IV node and
|it is LAN server
Node Volatile Summary as of 1-SEP-1995 11:40:40 |
|
Executor node = 46.116 (MARIO) |
|
State = on |
Identification = DECnet for OpenVMS VAX V6.1 |
My opinion was: at least one of such should work;
Then I tried with 46.116 alone and again with other DECnet Phase IV
addresses but I got always the same.
Could be the problem is the owner of DECMCC is DECnet/OSI V6.1?
Thanks for help
Daniele Spessato @TRN
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 6369.1 | Problem reproduced | DSVB03::TABONE | Mon Sep 04 1995 15:31 | 8 | |
Hello Daniele, We have reproduced your problem. Could you please log an IPMT call to track it better. Thanks in advance. Regards, Philippe | |||||