[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

6344.0. ""Insufficient dynamic memory" when enabling alarms" by CSC32::J_RYER (MCI Mission Critical Support Team) Wed Jul 12 1995 23:32

    Customer running VMS V6.1 and MCC V1.4 on a VAX is seeing these errors
    if he tries to enable "too many" alarms.  With the default value of 100
    for the sysgen parameter CTLPAGES, he was able to enable about 250
    alarms.  By bumping up that parameter to 200, he was able to enable
    about 350 alarms.  He wants to enable around 500 alarms, and is looking
    for guidance on whether that is indeed the appropriate parameter to
    be increasing, and what the formula is for deciding how high to set it.
    
    The errors that he's seeing are:
    
    %DEBUGBOOT-W-EXQUOTA, exceeded quota
    %CMA-F-EXCCOP, exception raised; VMS condition code follows
    -SYSTEM-F-INSFMEM, insufficent dynamic memory
    
    He ran MCC_AUDIT.COM and the only parameter that it suggested that
    he increase was PQL_MASTLM (currently set to 100; recommended that
    it be higher than 600).  He will reboot system with that parameter
    changed later today but asked if in the meantime we would try to gather
    any information or recommendations that we could.
    
    Thanks,
    Jane Ryer
    MCI Mission Critical Support Team
    U.S. Customer Support Center
T.RTitleUserPersonal
Name		DateLines