Conference azur::mcc

6295.0. "Reference color not changed" by DEKVC::SHINHONGKANG () Tue May 09 1995 14:25

Help me!!!

I want to know solutions about below problems within fast time.

  1. I had made applicaton that they can be monitoring process and disk usage,
     and send the messages MCC station. 
    
     The problems 
     -> In the Iconic map, I had made two reference(killed_process & diskrate
        _low) and one collector module. 

        If my application sended the messages, collect changed color, but,
        references could not changed color, and notification messages were
        normal.

        I had tested them with sample program(qwatch.com), but the results are
        same.

        Please help me!!!

        I had seen the related note (4894.1)
        but, In the my domain, "Notify Domain" and "Change color" option were
        grayed and could not select the option. were this problem related above
        my problems.


    2.  Would you tell me how to change from node5 entity to node4 entity.
        
        Before, two node had been registed the decnet 5 node, but, they were
        changed decnet 4 node.  how can I changed the node entity.
        I want to know the changing procedure.

        I am a beginer in MCC because previous charger were in hospital now.
        we have delivering large customer project(2year) and give solution 
        to our customer within fast time.  I have had the job since last week.

        Please help me!!!! 
       
        Thanks, Shinhong.

>>    2.  Would you tell me how to change from node5 entity to node4 entity.
  
You have to enter a command such as "deregister node xxx" and then register
then as node4 (register node4 xxx).

Hope this helps 

Benoit

    
    Thanks,  I did it successfully, but My big problems is that can not
    have the demo because the reference color did not changed and only
    changing collector color.  I had modified qwatch.com with sending
    message to node4 node and refereces, but, the results were same! only
    collector color had changed.  I had registered the reference againly,
    but, I can not change color reference and other target.
    Please tell me what I will check!!!!!!!
    Shinhong. 

     please show the way you are sending the data collector messages.
    
    They key field is the target entity - it should be somthing like
    "reference disk" to change the colour of the reference icon called
    disk.
    
    the whole mcc_evc_send should be something like
    
    mcc_evc_send node collector "reference disk" "text" "text'...
    
    Dave McCallum
    

    
    I had some mistakes in Notication window setup.
    As to before setting, the result of seting 'Assign Taget' in 'Tageting'
    menu of Notification window is the refered collector, I had removed that
    and It's OK.
    
    Thanks, Shinhong.