| Andrew,
This is my present experience with advice... you don't HAVE to have to
install Extensions or OSI on the system that runs MCC. Any machine in
your network can act as a load host. However, you do need at least 1
machine as a load host and I believe Extensions is the minimum
requirement.
If you install DECnet VAX Extensions on your existing MCC machine it
will be no trouble. Extensions is very similar to Phase IV DECnet. I
would recommend that you upgrade it to DECnet/OSI if you can run a
minimum of OpenVMS V6.0, which is a requirement I believe...?
As an aside, remember that you get to use the CMIP AM to manage the NIS
routers. This alone has won a router deal for us... Good luck.
/Mic
|
| re .1
Thanks for your advise, customer is using MCC withour DECnet-VAX
extension and they want to use it as load host for DECnis and this
requires DNVEXT, but I just wonder do we have to re-install DECmcc
after upgrade to DNVEXT?
Will they lose MCC configuration after the DNVEXT upgrade?
thanks
Andrew Chiu - NIS Sydney
|