Conference azur::mcc

6142.0. "Was this impleamented in the T1.4 release for Ultrix??" by MADMXX::WOESTEMEYER (Why??...Why not!!!) Thu Oct 20 1994 16:07

Note 5180.0 implies an enhancment to the TCPIP AM for a special project.  
Was this enhancment incorporated into the T1.4 kit for Ultrix??  I am in the
same boat and would like to be able to get traps from both interfaces.

Note 5180.0:
---------------------------------------------------------------------------------
            <<< NOTED::DISK$NOTES6:[NOTES$LIBRARY_6OF4]MCC.NOTE;2 >>>
                        -< DECmcc - Internal Use Only >-
================================================================================
Note 5180.0        Managing dual Ethernet networks via DECmcc            1 reply
CUJO::HILL "Dan Hill-Net.Mgt.-Customer Resident"     32 lines  10-JUN-1993 16:32
--------------------------------------------------------------------------------
    We have successfully tested a VAX4000/90 with dual Ethernet controllers
    receiving SNMP traps from two separate networks.
    
           +---+
           |ip1|
           +---+
             | 2.2.2.1
    0--------+---------+--------0
                       | 2.2.2.2
                   +--------+
                   |  mcc1x |
                   |--------|  VAXstation 4000/90 with two ip addresses.
    		   |  mcc1  |
                   +--------+
                       | 1.1.1.2
         0-------+-----+-------------0
                 | 1.1.1.1
               +---+
               |ip2|
               +---+
    
    We generated multiple traps from nodes  ip1  and  ip2  and MCC
    processed them very nicely.
    
    This required a modification to the MCC_TCPIP_SINK.EXE.  The
    modification will be (I hope) included in the upcoming MUP or slightly
    thereafter.
    
    Thanks to the engineering team for their efforts.
    
    -Dan