Conference azur::mcc

5804.0. "DECcontrator 500 - 6 port ansi multi mode card?" by CSC32::D_SHAVEY () Wed Dec 29 1993 13:45

    Hi,
    
    	A customer has a DECconcentrator 500 (V3.2) with a 6-port-Station-
    card with ANSI options.
    
    He registered his DECconcentrator 500 via the Concentrator module.
    
    When he clicks on the PHY PORT she only sees Ports 1A and 2A.
    But he cannot see the Ports of the new 6-port-card.
    
    
    Note 5552 is the same problem, but there was never a solution entered.
    
    The DECconcentrator 500 is at:
    
    Examination of attributes shows:
                              Hardware Type = DEFCN DECconcentrator 500
                                ROM Version = V1.0.0
                                         ID = %X08002B34A0D5
                      Reset Defaults Switch = False
                                 IP Address = 146.240.80.104
                         Default IP Gateway = 146.240.80.25
                              Update Switch = False
                           Software Version = "V3.2.1   "
    				.
    				.
    
    Is there a new MIB that sees these 'new' six port ansi multi
    mode cards, and where could I obtain this, or does the DECconcentrator
    500 have to be upgraded from v3.2.1?
    
    Thanks,
    
    Darrell Shavey
    CSC32::D_SHAVEY
    DTN 592-4712